Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹1.2 Craccepted-finance | ₹1.2 Cr | accepted-finance |
Tender Value
Refer Docs
EMD Value
₹2.2 L
Closing Date
12 Dec 2025, 9:30 pmClosed
Karnataka Industrial Areas Development Board
Technical Assistant
Improvement of damaged roads and construction of new drains at Plot No. 750 to 660/B (4th Cross), 1193 to 1178 (8th Cross Road), 1210 to 1217 and 1119 to 1115 of Kanabaragi Industrial Area, Belagavi District
KIADB/2025-26/OW/WORK_INDENT371
KIADB/2025-26/OW/WORK_INDENT371
Open
Other Works
Two Tender Document System(Two Cover)
KIADB Head Office Bangalore
2 documents required · 2 mandatory
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
To qualify for award of this contract, each Tenderer whether his name should have in the last five years period (2020-21 to 2024-25).The Tenderer should have satisfactory completed as a prime contractor for at least one similar nature of work Improvement of damaged roads and construction of new drains etc., as per the detailed scope of work mentioned in the relevant clauses of value not less than Rs.74.00 lakhs.
Executed in any one financial year, the following minimum quantities of work: (Certificates of proof shall be enclosed from competent Authority not below the rank of Executive Engineer in Government/Public Sectors/Government Undertaking Organizations). (1) Earthwork Excavation & Embankment : 606 Cum, (2) Subgrade & Earthen Shoulders : 400 Cum, (3) WMM/DBM/BC: 345 Cum, (4) PCC/RCC: 334 Cum, (5) TMT Steel : 20 Tonne.
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity: (AxNx1.5 - B), where, A: Maximum value of Civil Engineering works executed in any one year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress. N: Number of years prescribed for completion of the works for which tenders are invited. B: Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 3 Months
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
To qualify for award of this contract, each Tenderer whether his name should have in the last five years period (2020-21 to 2024-25).Achieved in at least two financial years a minimum financial turnover of Rs.296.00 Lakhs. (Civil Contract works). (Not less than 2 times the amount put to tender).
liquid assets and /or availability of credit facilities of not less than Rs.44.40 lakhs (Credit lines/ letter of credit/ certificates from Public sector banks/Nationalized Banks (as per RBI guidelines) not less than 30% of the amount put to tender for meeting the fund requirement etc).
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years
₹3,700
₹2.2 L
12 Dec 2025
26 Nov 2025
15 Dec 2025
3 Dec 2025
4 Dec 2025
Improvement of damaged roads and construction of new drains at Plot No. 750 to 660/B (4th Cross), 1193 to 1178 (8th Cross Road), 1210 to 1217 and 1119 to 1115 of Kanabaragi Industrial Area, Belagavi District
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead complete with all lead a...
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...
Construction of unlined surface drains of average crosssectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanica...
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface complete with all lead and lift etc, as per specificatio...
Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.5 per cent by weig...
Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 5.4 per cent of mix an...
Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal ...
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC...
Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc (ii) Ordinary kilometer stone (precast) complete with a...
Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc (iii) 200 m stone (precast) complete with all lead and ...
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vi...
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area complete with all lead...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with s...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Line-2.pdf
Tender Document • 0.80 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .