CA NO CWE / HILLS /RKT/67 OF 2020-2021 SPECIAL REPAIR TO OTM BLDG NO-193, 194, 197, P-52 AND P-53 OF 5685 ASC BN (MT) AT MIL STN HALDWANI UNDER GE RANIKHET

Amount

Demolition of brick work in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge and thickness complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness, including cover fillets but without frame work complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work complete all as specified and directed.

Taking down Chowkhats or frames n exc 1.5 sqm each (without taking off shutters from frames) complete all as specified and directed.

Taking down Chowkhats or frames exc 1.5 sqm but n exc 4 sqm each (without taking off shutters) complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle, 03 No of MS tower bolt 100 mm long in each window and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle, 03 No of MS tower bolt 100 mm long in each window and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15mm thick on fair face of brick work or concrete surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L, for PCC 1:2:4, type B1 (using 20mm stone aggrigate) as in cills, steps seismic and other similar bands, plinth courses, parapets and railings slightly rounded or charfered complete all as specified and directed.

S&F 35 mm thick IInd class hardwood, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F 35mm thick Glazed and skeleton shutters in 2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars) edges of forming plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 150mm long, aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 100 mm long, butt hinges medium weight cold rolled complete all as specified and directed

S & F of 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighting 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application including applying evenly a tack coat of industrial bitumen 58/25 at the rate of 1.2 kg per sqm including cleaning of surfaces complete all as specified and directed.

S&F 4 mm thick non-asbestos fibre cement building board E-board, fixed or laid / inserted to timber / GI / Aluminium framework with screws as in ceiling flat or slopingcomplete all as specified and directed.

S&F powder coated GI snap grid frame work for false ceiling size of grid 605 mm X 605 mm complete all as specified and directed.

S&F 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

All as per item No. 23 above but plain steel sheet as in ridges, hip and valley complete all as specified and directed.

M&L for PCC 1:3:6, type C-2 (using 40 mm grade stone aggrigate) as in plinth protection inclding finishing even and smooth without using extra cement complete all as specified and directed.

S&F 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.

M&L for preparation wood surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on newly prepared wooden surfaces complete all as specified and directed.

M&L for preparation of newly or previously untreated of steel surfaces of any description, over 10cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F of 2nd class hard wood as in scantling, clean sawn in any position and any description as in framed work complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats oil bound distemper over a coat of primer including making the surface truly smooth by a coat of wall putty complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats cement base paint complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

Demolition of plain cement concrete as in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.

M & L for providing pre-cast cement concrete for man holes, chullah hoods, chajjas, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:4 complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15 mm thick screed bed of CM 1:6 mm thick complete all as specified and directed.

M&L for Glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick rendering in cement mortar 1:4 on brick work or concrete surfaces complete all as specified and directed.

M&L for 25 mm thick, cement concrete 1:2:4, type B-0 (12.5mm graded stone aggregate) as in sub floor to receive finishes complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side including panelling of plain colour PVC sheet to be fitted in the M.S. frame with wood grain printed PVC sheet used in serted completed all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplied & fixed wood grain complete all as specified and directed.

Taking down 15 mm bore steel tubing and connections including cleaning for refixing complete all as specified and directed.

Taking down 20 mm bore steel tubing and connections including cleaning for refixing complete all as specified and directed.

Taking down 25 to 32 mm bore steel tubing including connections complete all as specified and directed.

S&F of 15 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S&F of 20 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S&F of 25 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

Fixing only 15 mm bore tubes any grade to walls and ceilings or laying in floors complete all as specified and directed.

Fixing only 20 mm bore tubes any grade to walls and ceilings or laying in floors complete all as specified and directed.

Disconnecting existing tanks of capacity exc 500 ltrs but n exc 1000 ltrs setting aside, clearing ect and hoisted and refixed in position including clearing complete all as specified and directed.

All as per item No. 50 above but exc 250 but n exc 500 ltrs each complete all as specified and directed.

S&F rotational moulded polyethylene triple layer water storage tanks of capacity 1000 ltrs (Cylindrical vertical with closed top) hoisted and fixed in position all as per SSR Part-I complete all as specified and directed.

S&F 15mm bore, stop valve, cast copper alloy, chromium plated with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 20mm bore, stop valve, cast copper alloy, chromium plated with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 25mm bore, stop valve, cast copper alloy, chromium plated with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F of 15 mm size bib tap standard of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) complete all as specified and directed.

S&F 20 mm dia ball valve high pressure of PTMT with epoxy coated Alumunium rod and high density plastic ball screwed (Wt not less than 210 gm) complete all as specified and directed.

S&F of 32 mm size waste coupling of PTMT half or full threaded (minimum weight 45 gram) complete all as specified and directed.

All as per item No. 58 above but suitable for urinals complete all as specified and directed.

S&F of 450 mm long shelf of PTMT (minimum weight 300 gram) fixed with and including chromium plated brass screws and wooden / plastic cleats(minimum weight 300 gram) complete all as specified and directed.

S&F towel ring of PTMT (Minimum weight 90gms) fixed with and including Chromium plated brass screws and plastic cleats complete all as specified and directed.

S&F tubular towel rail CP brass, 20 mm dia chromium plated D type with CP brackets, 600 mm long between flanges complete all as specified and directed.

S&F 75 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 100 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75 mm bore, PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 mm bore, PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) branch piece, single (Single ‘Y’) equal or unequal complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) branch piece, double (double ‘Y’) equal or unequal complete all as specified and directed.

M&L for providing of 110 mm bore access door complete all as specified and diredcted.

S&F of 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F of 110 / 110 mm bore PVC (SWR) ‘P’ trap complete all as specified and directed.

S&F of 75 mm dia PVC (SWR) floor trap plains with grating including jointing with solvent cement complete all as specified and directed.

S&F 110 mm bore, PVC (SWR) reducers or diminishering pieces complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of 150 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M&L for unplastizised PVC pipe 160mm dia type B with well thickness 4 mm min of pressure rating 4KN/sqm laid in trenches and jointed with cement solvent including testing complete all as specified and directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests and flushing cistern and flush pipe fixed in repairs complete all as specified and directed.

S&F in repair vitreous China urinal, half stall type, white complete including flush pipe and waste pipe fixed complete all as specified and directed.

S&F in repair vitreous China wash basin, white, flat back of size 550 x 400 mm fixed to walls and fixed including fixing brackets complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20 mm stone aggrigate) as in roof paddings, kerbs and the like complete all as specified and directed.

S&F of mild steel work in hand rails, half round or other stock section or core for wooden hand rail nosing to steps etc wind tiles for roof securing with bolts post and struts complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Taking down cement plaster of any description, thickness on brick, stone, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning, etc complete as directed and specified.

M&L for PCC 1:4:8, type D-2 (using 40 mm grade stone aggrigate) as in foundation filing and mass concrete complete all as specified and directed.

Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in hard/ dense soil complete all as specified and directed.

M&L for rubbing and polishing mirror polish to existing kota stone complete all as specified and directed.

M&L for Kota Stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid including 10 mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F decorative MS PVC coated tubular curtain rail of wooden finish of dia not less than 25 mm including six no's curtain ring per running mtr and one number of brackets on each end and one number of globe on each end of the rod per opening of door / window complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and average 15 cm deep and getting out in soft/disintegrated rock complete all as specified and as directed.

M&L for providing 75 mm thick cement concrete 1:4:8, type D-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor finished even and rough complete all as specified and directed.

M&L for sand filling under floor/paver block or in foundation including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast cement concrete interlocking paver block any shape and size 60 mm thick with grey cement and pigments confirming to IS 15658-2008 of M-35 complete all as specified and directed.

M&L for rendering 15mm thick on fair face of brick work or concrete surfaces in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats oil bound distemper over a coat of primer including making the surface truly smooth by a coat of wall putty complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats cement base paint complete all as specified and directed.

Taking down carefully aluminium/copper wiring of any size (for light, fan, socket or power etc complete) including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fitting holders etc and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and directed.

Taking down unserviceable main switches MCB DB’s incl MCB SP/DP/SPN of any make and type including teakwood board etc complete and making good the disturbed surfaces including colour wash complete all as specified and directed.

M&L for point wiring for one light point/ fan/ bell (independent) point controlled by one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia ) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed Note:- wiring shall be done in colour coding as directed by Engineer in charge.

All as per item No. 97 herein before but one socket outlet 5 Amps on the same board.

All as per item No. 97 herein before but one switch socket combination 5 Amps on independent board

All as per item No 97 herein before but wiring with 2.5 sqmm copper wire (FRLS) PVC and 2.5 sqmm earth wire for socket outlet 5 pin 15 amps on independent board complete all as specified and directed.

S&F switch piano flush type, single pole, one way 5 Amp complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed.

S&F switch piano flush type, single pole, one way 15 Amp complete all as specified and directed.

S&F ceiling rose, PVC/ Poly carbonate, isolated body three terminal complete all as specified and directed.

S&F lamp holder PVC insulated body with back plate for angle/battern fitting complete all as specified and directed

S&F MCB Four pole, 415 Volts, 50 Hz, 63 Amps, 10 KA complete all as specified and directed .

S&F MCB DP 240 Volts, 50 Hz, 40 Amps, 10 KA complete all as specified and directed .

S&F MCB DP 240 Volts, 50 Hz, 63 Amps, 10 KA complete all as specified and directed .

S&F MCB SP 05, 40 Amps, 10 KA complete all as specified and directed .

S&F sheet metal enclosure for DBs(double door type) single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

S&F sheet metal enclosure for DBs (double door type) single pole and neutral 12 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

M&L for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note : 1 The cost of earth wire is included in the quoated rates. 2. Two run of 4 sqmm, one run of 2.5 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”

S&F steped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed .

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross section area 25 Sqmm 2 core laid in trenches or passing through pipes/ducts and incl the disturbence surface of road making good with using PCC complete all as specified and directed.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross section area 16 Sqmm 2 core laid in trenches or passing through pipes/ducts and incl the disturbence surface of road making good with using PCC complete all as specified and directed.

Returning, filling incl spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil all as specified and directed.

Removing excavated material (soil) not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for dry clean sand filling in trenches below and around under ground cable cushioning complete all as specified and directed. Note :- Thickness of sand cushioning shall be measured after punning.

M&L for brick sub class 'B' for protection of cable comlete all as specified and directed.

Supply and Fixing steel tube medium grade galvanised 25 mm bore with all fittings for protection of UG cable under road/culvert and fixing on wall with saddle, screw complete all as specified and directed.

M&L for taking down ceiling fans / wall mounted fans of any size / sweep after disconnecting the wire from existing ceiling rose and refixing the same after painting the same with synthetic enamel paint by spray machine including filter after cleaning dust, taking out burnt/damaged winding, bushes & cleanig of stator and rotor incl etc. Rewinding with 26/27 SWG of enamelled copper winding wire replacement of bearing /bushes, condencer 2.5/4 mfd handing and testing of fan with and including provision of 23/0.0076 copper flexible core twin core not less than 1.5 meter in length and make the fan operational complete all as specified and directed.

S&F high quality LED T-5 indoor batten (warm/milky white as required at site) tube light with PC housing fitting 1x20 Watt, channel suitable for LED tube rod with standard fittings complete all as specified and directed.

Supply and fixing 10W bulk head light PDC aluminium housing with polycarbonate diffuser, SMD LED and heat sink integrated with housing complete all as specified and directed

URBANS CONSTRUCTIONS

aditya construction

Shri Siddhi Vinayak Constructions

krishan enterprises

Builders Harpal

kumar automobiles

YASH ENTERPRISES

M/S MADAN MOHAN PANT