Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 LAdmitted-Finance MARAR RANCHI ROAD DISTT RAMGARH JHARKHAND | RAMGARH | JHARKHAND | ₹2.5 L | L1 | Admitted-Finance |
| 2 | L2₹2.5 LAdmitted-Finance MARAR RANCHI ROAD DIST RAMGARH JHARKHAND 829117 | MARAR | RAMGARH | JHARKHAND | 829117 | ₹2.5 L | L2 | Admitted-Finance |
| 3 | L3₹2.5 LAdmitted-Finance | ₹2.5 L | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S NATIONAL ENTERPRISES L2 | M/S BHARAT MOTORS L1 | Maa Chinmastik Trading L3 |
|---|---|---|---|---|---|---|
| 1.00 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 1,168.56 | Kg | 108 ₹1.3 L | 107 ₹1.3 L | 109 ₹1.3 L |
| 2.00 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 127.5 | Sqm | 696 ₹88,740 | 695 ₹88,612.50 | 700 ₹89,250 |
| 3.00 | providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | 70 | Kg | 85 ₹5,950 | 82 ₹5,740 | 90 ₹6,300 |
| 4.00 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in charge. All kinds of soil | 2.5 | cum | 140 ₹350 | 138 ₹345 | 145 ₹362.50 |
| 5.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 4 | cum | 7,400 ₹29,600 | 7,350 ₹29,400 | 7,500 ₹30,000 |
| 6.00 | Total impact of GST for the purpose of CTC | 1 | No | - | - | - |
Tender Value
Refer Docs
EMD Value
₹3,700
Closing Date
15 Apr 2026, 9:00 amClosed
PE EnM
KOCP
Fabrication of Shed for Pump, Starter and motor at Kedla OCP under Hazaribagh Area.
2026_CCL_357948_1
PO/KOCP/EnM/Tender/26-27/02
Open Tender
Electrical and Maintenance Works
30 days
KOCP
As per NIT
2 documents required · 2 mandatory
₹3,700
24 Apr 2026
3 Apr 2026
16 Apr 2026
5 Apr 2026
15 Apr 2026
5 Apr 2026
5 Apr 2026 - 10 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | - | Kg | - | - |
| 2 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | - | Sqm | - | - |
| 3 | providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | 70 | Kg | - | - |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in charge. All kinds of soil | 2.5 | cum | - | - |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 4 | cum | - | - |
| 6 | Total impact of GST for the purpose of CTC | - | No | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 2.18 MB
BOQ_370829.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid