Package (1) Construction of New Animal Husbandry EPI center Under Intensive Cattle Development Programme & Other Miscellaneous Work at Kakalpur, Ta-Devgadh Baria, Dist. Dahod (2) Construction of New Animal Husbandry Epicenter Under Intensive Cattle Development Programme & Other Miscellaneous Work at Tarmi Ta-Singvad Dist. Dahod

Name of Work :- Package (1) Construction of New Animal Husbandry Epi

center Under Intensive Cattle Development Programme & Other

Miscellaneous Work at Kakalpur, Ta-Devgadh Baria, Dist. Dahod (2)

Construction of New Animal Husbandry Epicenter Under Intensive Cattle

Development Programme & Other Miscellaneous Work at Tarmi Ta-Singvad

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

1 Excavation for foundation upto 1.5 m depth including sorting out and 126.00 Cum. 160.89

stacking of useful materials and disposing off the excavated stuff upto

Meter lead. (B) Dense or Hard soil.

2 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out 76.00 Cum. 294.05

and stacking of useful materials and disposing off the excavated stuff upto

50 Meter lead. (C) Hard Murrum.

3 Filling in foundation and plinth with sand in layers of 20 cm. Thickness 30.00 Cum. 419.82

including watering ramming and consolidating etc. comp.

4 Filling available excavated Earth (Excluding Rock) in trench plinth side of 146.00 Cum. 137.47

foundation . in layer not excluding 20 cm in depth consolidation each

deposited layer by ramming and watering etc. complete

5 Filling Foundation and Plinth with Murrum or selected soil in layer of 20.00 Cum. 273.07

20 cm in thickness including ramming watering and consolidating etc.

6 Applying general insecticide pest control treatment to floors, cupboards etc 260.00 Sqm. 54.39

including labour materials etc. complete. Using Imidacloprid 30.5 SCas Per

IS 6313 part-II (0.075% concentration by mass) is recommended 10.5ml

chemical diluted with 5 liters of water application 0.5 litre chemical / Sqm. of

surface is recommended as per I.S.

7 Providing and laying controlled cement concrete M.150 for curing complete 10.00 Cum. 4614.69

including cost of formwork and reinforcement for reinforced concrete work in

(A) Foundations, footings, Base of columns and Mass concrete.

8 Providing and laying controlled cement concrete M.250 and curing complete 26.00 Cum. 4850.02

including the cost of formwork and excluding reinforcement for reinforced

concrete work in (A) Foundations, footings, and Mass concrete.

9 Providing and laying controlled cement concrete M-250 and curing complete 8.00 Cum. 8274.93

including the cost of form work but excluding the cost of reinforcement

for reinforced concrete work in (D) Columns Up to Ground level.

10 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand 42.00 Cum. 3758.21

: 6- machine cut stone aggregates 40 mm nominal size) and curing

complete including cost of formwork in (A) Foundation and Plinth.

11 Providing and laying controlled cement concrete M-250 and curing complete 18.00 Cum. 8229.48

including the cost of form work but excluding the cost of reinforcement

for reinforced concrete work in Columns, pillars posts and struts GROUND

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

12 Providing and laying controlled cement concrete M-250 and curing complete 6.00 Cum. 8269.88

including the cost of form work but excluding the cost of reinforcement

for reinforced concrete work in Columns, pillars posts and struts FIRST

13 Providing and laying controlled cement concrete M-250 and curing complete 20.00 Cum. 4592.47

including the cost of form work but excluding the cost of reinforcement

for reinforced concrete work in Ground & Plinth BEAMS.

14 Providing and laying controlled cement concrete M.200 and curing complete 20.00 Cum. 5580.25

including the cost of formwork and excluding reinforcement for reinforced

concrete work in (C) Plinth Slabs

15 Providing and laying controlled cement concrete M.250 and curing complete 16.00 Cum. 6303.41

including the cost of formwork and excluding reinforcement for reinforced

concrete work in (C) GF Beams.

16 Providing and laying controlled cement concrete M-200 and curing etc. 2.00 Cum. 6307.45

complete including the cost of form work and reinforcement for reinforced

concrete work in (c) Chhajja for GROUND FLOOR.

17 Providing and laying controlled cement concrete M-200 and curing etc. 2.00 Cum. 8794.07

complete including the cost of form work and reinforcement for reinforced

concrete work in (c) Lintal for GROUND FLOOR.

18 Providing and laying controlled cement concrete M.250 and curing complete 18.00 Cum. 7404.31

including the cost of formwork and excluding reinforcement for reinforced

concrete work in (C) GF Slab.

19 Providing IS Mark TMT FE 500D bar reinforcement for RCC work 11860.00 Kgs. 77.37

including bending & placing in position complete up to All floor Level.

20 Pro. And fixing single layer Water Proof Gypsum Board 12.5 mm. thick 42.00 Sqm. 606.95

sections using water proof board of size 1220 mm x 1830 mm x 8.0mm.

suspended by GI suspender channel of size 25 mm x 3 mm with

intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center

to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c

and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at

edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt

connecting cleat, joining compound top coat on ceiling incl.making

necy.opening for light fitting,diffuser etc. comp. as per detail drawing as

21 Brick work using common burnt clay building bricks having crushing 46.00 Cum. 3853.23

strength not less than 35 Kg./Sq.m. in Foundation and Plinth in cement

mortar 1:6 (1 cement:6 fine sand) (B) Conventional.

22 Brick work using common burnt clay building bricks having crushing 58.00 Cum. 4141.66

strength not less than 35 Kg./ Sqm. in cement mortar 1:6 ( 1 cement :

Fine sand ) in super structure above plinth level upto floor two level (For GF)

23 Brick work using common burnt clay building bricks having crushing 24.00 Cum. 4180.17

strength not less than 35 Kg/Sq.cm. in super structure in cement mortar

1:6 (1cement : 6 fine sand) [For FF]

24 Providing 20 mm thick Double Coat Mala Cement Plaster on interior brick / 464.00 Sqm. 290.88

concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and

mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding curing etc. complete. For GF.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

25 Providing 20 mm thick double coat mala cement plaster with 1x1cm grooves 114.00 Sqm. 319.16

on interior brick / concrete work for plastering comprising of base coat of

mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in

rough finishing and 8 mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with mala including scaffolding curing etc.

complete. For First Floor.

26 Providing 10 mm. Thick Mala plaster in single coat for plastering on ceiling 132.00 Sqm. 213.11

and soffits of stairs and finished in : (I) Cement mortar 1:3(1 cement :

3sand) with Mala finished of neat cement slurry etc. complete.Ground Floor

27 20 mm Thick Sand Faced Double coat Gutka plaster on walls with 500.00 Sqm. 353.98

1x1cm grooves consisting of 12 mm Thick backing coat of c.m. 1:3 (1

cement : 3 sand) and 8 mm Thick finishing coat of c.m. 1:1 (1 cement :

sand) etc. complete. For all height and as per pattern sample aprroved by

the architect or directed engineer in-charge

28 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 40.00 Rmt. 44.07

29 Applying two coats of Birla or Asian acrylic lapy (putty) & two coats of primer 720.00 Sqm. 40.59

of approved brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar dropping

and other foreign matter and sand papered smooth.

30 Wall painting (three coats) with plastic emulsion paint of approved brand 580.00 Sqm. 128.38

and manufacture on undecorated wall surface to give an even shade to

highlight in special effect ( Royal play) colour including throughly brushing

the surface free from mortar droppings and other foreign matter and sand

papered smooth.

31 Painting (two coats) with plastic emulsion paint of approved brand and 140.00 Sqm. 90.48

manufacture on undecorated ceiling surface to give an even shade to

highlight in special effect ( Royal play) colour including throughly brushing

the surface free from mortar droppings and other foreign matter and sand

papered smooth.

32 Finishing wall with weather proof exterior emulsion paint on wall 500.00 Sqm. 174.23

surface (two coat) above one coat of primer to give an required shape even

shade after throughly brushing the surface to remove all dirt, and remains of

loose powdered materials etc. complete.

33 Providing and laying controlled cement concrete M-200 for RCC work 4.00 Cum. 4732.86

and curing complete including the cost of form work but excluding the

cost of reinforced concrete work in COPING on Ground Floor.

34 Providing and fixing Jindal E(30mm) series Three track alluminium window 16.00 Sqm. 2914.86

standerd extruded colour anodized aliminium section with Frame having all

Horizontal Frame bottom member Jindal Section no. 20928 & all top &

sides frame members Jindal Section no. 20837 with sliding shutters of

single glass shutter top bottom member Jindal Section no:20993 @ wt.

Of 0.839 Kg/Rmt & side member Jinda Section no:20550 @ wt.of

Kg/Rmt & Inter lock member Jindal section no - 20549 @ wt.of

Kg/Rmt with 5 mm thick TRANSPARENT BRONZE COLOUR TINTED

FLOAT GLASS in shutter including fitting, fixtures, rubber gasket and

transparent silicon sealant as per drawing and instruction of Engineer - in -

charge etc. completed for THREE TRACK SLIDING WINDOW (2

SHUTTER + 1 MOSQUITO NET SHUTTER)

35 Providing & Fixing in position standard extruded approved colour anodised 2.00 Sqm. 2887.59

Aluminum Ventilator with outer frame of Jindal section no. - 21458 standard

Aluminium Box frame with 3 mm. thick Bajari glass louvers type fixed to

alluminium strip blade including fixtures, fastenning, labours and equipments

as per detailed drawing as directed. For Ventilators

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

36 Providing and fixing 35 mm thick DOUBLE SHUTTER FLUSH 6.00 Sqm. 9680.85

DOOR with 100 x 50mm Teak wood frame with 75 x 35mm Teak wood

Beading finished with Pattern laminated on both sides in- situ Laminated

work 35 mm thick Factory Pressed flush door of natural wood grain

shade, like 'NOVAPAN 'or equivalent pattern and design is to be approved

by the EIC, with SS handle size 60 Cm Long, 2 Tower Bolt size 30cm, &

Heavy Stainless steel Aldrop,concealed lock, SS hinge as per detailed

drawing / as directed by EIC.

37 Providing and fixing 35 mm thick SINGLE SHUTTER FLUSH 6.00 Sqm. 6736.70

DOOR with 18mm thick Grenite frame of selected colour and shade with

75 x 35mm Teak wood Beading finished with Pattern laminated on both

sides in-situ Laminated work 35 mm thick Factory Pressed flush door of

natural wood grain shade, like 'NOVAPAN 'or equivalent pattern and design

is to be approved by the EIC, with SS handle size 60 Cm Long, 2 Tower Bolt

size 30cm, & Heavy Stainless steel Aldrop,concealed lock, SS hinge as

per detailed drawing / as directed by EIC. [Grenite Door Frame sapately

38 Factory made 28mm door shutter, consisting of 4mm thick heat moulded 4.00 Sqm. 2706.80

pvc 'c' channel having width of 75mm all around to form stiles and width of

75mm to form top and bottom rail on either sides. the stiles, top and bottom

rails will be mitered and joined at corners internally by screws to the pvc'l'

brackets of length 150mm. the 20mm thick inner panel shall consist of

18mm thick high density eps confirming to is-4671-1984 bonded with 1.0mm

pvc rigid form sheet on either sides, by suitable adhesive & pressed

properly. the panel will be inserted & sealed by solvent cement adhesive

to stiles & rails on either sides and at top and bottom ends. the lock rail

39 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base 94.00 Sqm. 1472.91

of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for DARK shade.

40 Providing and laying Vitrified tiles [DARK SHED] 8 to 10 mm thick, in 10.00 Sqm. 1592.40

skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

41 Providing and laying 300mmx300mm / 600mm x 600mm. matt finished 6.00 Sqm. 1080.70

Antiskid ceramic glazed tiles 10mm thick in flooring laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3- coarse sand ) including 3mm

grooove epoxy grouting of perifery of tiles with required dismention &

finishing with flush pointing in white cement or match shad etc. completed.

42 Providing and laying coloured glazed tiles of the size 300 mm x 600mm x 42.00 Sqm. 1161.50

10 mm / 300mm x 450mm x10 mm. in skirting, risers of steps and dedo

on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) including

3mm grooove epoxy grouting of perifery of tiles with required diamention &

jointed with white cement slurry.

43 Providing and laying machine cut free edge machine polished 6.00 Sqm. 2533.08

granite stone 18mm thick finished treads and risers in with 1cm projecting,

nozing rounded moulding in tread laid over 20 mm (avg.) thick bases of

cement mortar 1:2 (1- cement : 2-coarse sand) jointed with grey or

colour cement slurry including rubbing and polishing incl. making Three

No.s of grooves of size 3mm X 3mm along the length of treads etc.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

44 Providing and fixing Machine Cut, polished Granite Stone Slab 18 mm 54.00 Sqm. 3258.26

th for vertical jambs, Top and bottom sill stair landing and table top wash

basin etc. And cladding as per the design and laid on 20 mm th. cement

mortar 1:3 (1 cement : 3 Coarse sand) jointed with grey cement slurry

including rubbing and polishing, finishing etc. complete.

45 Providing and fixing pre-cast Rubber Dye inter locking concrete block 144.00 Sqm. 702.02

60mm thick with grade of concrete M300 pnumatic compressed by

mechanically pressed and as per approved design including 75mm Sand

layer for levelling and filling the joint with sand in proper line and level etc

46 Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse 120.00 Sqm. 355.69

sand : 4-graded stone aggregate 20mm nominal size) laid in one layer and

finished with a floating coat of neat cement. (B) 50mm thick.

47 Providing and laying broken chine mosaic flooring for terrace using 12mm to 120.00 Sqm. 779.70

20mm broken pieces of glazed tiles to be laid over cement mortar 1:3 top

lain or slope and to be tempered to bring mortar creme out up to

surface using white cement including rounding off junctions and extending

them up to 15 cm along the wall, clearing with water and oxalic acid

etc. as directed.

48 Providing and fixing Safty Grill of required pattern for windows/ Door 1920.00 Kgs. 135.85

using necessary M.S angle/ M.S pipe, M.S flats and other structural

steel at required spacing including cutting, welding and fabriction etc.

including one coat of primer of approved quality and two coats of oil painting

as per detail drawing etc complete.

49 Providing erecting and fixing double coated Syntex PVC. (ISI) water 4000.00 Litre 3.95

tank of required capacity each with all necessary fittings and connection

etc. complete on terrace.

50 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( 40.00 Rmt. 195.67

SCH- 40) for cold water including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

51 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( 40.00 Rmt. 148.12

SCH- 40) for cold water including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

52 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( 20.00 Rmt. 91.84

SCH- 40) for cold water including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

53 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( 20.00 Rmt. 72.65

SCH- 40) for cold water including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

54 Providing, laying and jointing in true line and level 160 diametre U.P.V.C 20.00 Rmt. 834.38

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of

55 Providing laying (to level or slopes) and jointing reinforced concrete Light 80.00 Rmt. 677.93

duty non-pressure pipes I.S. class NP2 of the following internal diameter

with collars and butt ends prepared for collar joints including testing of

joints complete.(D) 300 mm

56 Providing, laying and jointing in true line and level 110 diametre U.P.V.C 32.00 Rmt. 897.79

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of

57 Providing, laying and jointing in true line and level 75 mm dia. UPVC 20.00 Rmt. 271.69

SWRType B pipe conforming to IS 13592-1992 with one end plain and other

end socketed with rubbering and fitting conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp at every 2000 mm c/c or shall be conceled in walss as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of

58 Providing and fixing in PVC SWR cowel went 75mm dia to pipes.(B) 4.00 No. 40.40

59 Providing and fixing in PVC SWR cowel went 110 mm. Dia. to Pipes.(B) 4.00 No. 50.50

60 Providing and fixing S.S. Cup Type Nahni Trap of Standard quality or it's 10.00 No. 1810.93

equivalent including cutting hole and self clean design itc completed as

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

61 Providing and fixing wash down water closet (European type W.C. 2.00 No. 8736.50

pan Wall Hung) with untegral P and S trap, Flushing system seat vicer

etc complete unit of jaquar brand or any iquevelant quality and

brand as approved by engineer in charge including installing and fitting as

per manufacturers standards by skilled trained workman incluidng testing

62 Providing and fixing wash down water closet (Indian W.C. pan) 2.00 No. 1670.54

(Hindware, Perry, Cera or equivalent approved quality) size 580 mm with

100mm 'P' or 'S' trap including jointing the trap with soil pipe in cement

mortar 1:1 (1 cement : 1 fine sand) with prov

63 Providing and fixing urinal of approved quality including connection the 2.00 No. 1078.68

urinal with waste pipe tap eetc complete .(A) White earthenware flat

back or corner type size 430 mm x 260 mm x 350 mm including fixing CP

brass waste pipe white earthen ware flat back including 20mm dia flush

cock etc completed.

64 Providing and fixing Solo Concealed stop cock, Regular Body with 10.00 No. 1444.30

adjustable wall flange of 15mm diameter of the make as approved by

Engineer - in - charge.

65 Providing & fixing of first quality Washbasin 550 x 405 x 205 mm Snow 4.00 No. 7189.18

White or equivalent including with approved sanitary grade material with

C.P waste coupling, Bottel Trap, Stop Cock of Jaquar or euivalent

approved brand by Engineer in charge etc. complete.

66 Providing and fixing ball cock of approved. Quality as directed.(A) Copper 2.00 No. 189.84

Metal (ii) 50mm dia.

67 Providing and fixing S.S. standard size & quality of metropole flush cock 2.00 No. 4803.56

as directed brand as approved by engineer in charge.

68 Providing and fixing Continental Bib Cock of 15mm dia good quality etc. 10.00 No. 1495.81

of approved make including fixing with all required lanour & materials

69 Providing and laying (two level or slopes) and jointing with stiff mixture 142.00 Rmt. 531.04

of Cement Mortar in proportion 1:1, Salt glazed stone ware pipes of pipes

150mm laying cement concrete 1:5:10(1 cement-:5-Fine sand : 10-

Graded brick aggregates 40mm nominal size) bedding for stoneware pipes

of following internal diameters with necessary formwork and curing

70 Providing and fixing S.W. gully trap with C.I. grating brick masonry 6.00 No. 1246.92

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight (i) Square mouth traps (B) 150mm x 100mm

size P or R type

71 Constructing brick masonry chamber for underground C.I. 12.00 No. 3698.62

Inspection chamber and bends with briocks having croshing strength not

less than 35Kg. Cm2 in C.M. 1:5 precast RCC cover 455mm x 610mm

intenal dimensions with frame (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed concrete etc.

complete (i) Inside dimensions 455mmx 610mm and 450mm deep for

single pipe line.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

72 Constructing brick masonry chamber for underground C.I. 12.00 No. 4398.55

Inspection C.I. Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 precast RCC cover 500mmx

700mm intenal dimensions with frame (R.C.C. top slabe with 1:2:4 mix

(1-cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cement on walls and bed

concrete etc. complete (i) Inside dimensions 500mmx 700mm and 450mm

deep for single pipe line.

73 Extra over items for every additional depth of 0.1M. of part thereof 8.00 Each 242.39

beyond 450mm depth for Brick masonry chamber.(i) for 455mm x 610mm

74 Extra over items for every additional depth of 0.1M. of part thereof 8.00 Each 264.86

beyond 450mm depth for Brick masonry chamber.(i) for 500mm x 700mm

75 Providing Cement Vata (10cm x 10cm size) Quarter Round in 80.00 Rmt. 24.28

cement mortar 1:1 including neat cement finishing watering etc. Complete

76 40 mm thick wooden shelves supported on 40 x 40mm x 6 mm T or L 16.00 Sqm. 1727.22

iron brackets fixed at suitable distances not exceeding 75 cm. apart

with Mango wood or equivalent quality.

77 Providing and fixing 200 mm wide, approved quality chicken wire 60.00 Sqm. 421.37

mesh at junction of brick work and RCC work or two dissimilar surfaces,

at all heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before

applying the plaster, including curing, scaffolding all complete as directed.

78 Excavation for foundation upto 1.50 mt depth including sorting out and 64.00 Cum. 125.86

stacking of useful materials and disposing the excavated stuff all lead & lift

(A) Loose or soft soil.

79 Excavation for foundation 1.50 mt to 3.00 mt depth including sorting out 12.00 Cum. 174.56

and stacking of useful materials and disposing the excavated stuff upto

mt lead (B) Dense or hard soil

80 Providing 20 mm thick Water proof cement plaster for sunk in single coat 22.00 Sqm. 346.43

on brick / conctrete wall for interor plastering up to floor two level finished

even and smooth (ii) cement mortar 1:3 (1- cement, 3 sand) and mixing

waterproofing materials of approved brand and manufacture in cement

mortar in proportion recommended by the manufacture for All floor.

81 Constructing brick masonry chamber for underground C.I. Inspection 2.00 No. 7180.44

chamber and bends with briocks having croshing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions, total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(iii) Inside dimensions 600mm x 850 mm and

450mm deep for pipe lines with three or more inlets.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

82 Point wiring for Light/ Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm 22.00 Pt. 485.81

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in below type of pipe erected with 6A Modular

type switch/ bell push & accessories and earth continuity of following type,

erected on PVC/ Metallic/ Wooden box, single mounting base frame

covered with textured/metallic front plate modules erected on/ in wall/ ceiling

as per pipe erected, with necessary Lamp holder/ ceiling rose/ H.D.

Connector as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ ceiling complete, Cat-III [1-2-1]

83 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) 10.00 Pt. 674.68

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand

copper wires, in below type of pipe erected with 6A Modular type switch and

hum free EME four or more step type electronic fan regulator with

separately mounted and accessories with earth continuity of following type

erected on PVC/ Metallic/ Wooden box, single mounting base frame

covered with textured/metallic front plate modules erected on/ in wall/ ceiling

as per pipe erected. with necessary ceiling rose/ H.D. Connector as

directed. (f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ ceiling complete, Cat-III [1-2-2]

84 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both 4.00 Pt. 745.38

are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper

wires, in below type of pipe erected complete with Modular type switch &

pin Plug erected on PVC/ Metallic/ Wooden box covered with appropriate

front plate modules erected on/ in wall/ ceiling as per pipe erected with

following type of accessories. [II] For 16A Plug and 16 amp switch with 2-

2.5 sq.mm Cu. Wire from mcb db board. (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete, Cat-III [1-

85 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin 10.00 Pt. 257.55

socket erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/ white front plate modules erected on/ in

wall/ ceiling with following type accessories, Cat-III [1-2-4]

86 Decorative call bell Ting-tong box type 250 volts complete erected [1-6-12] 2.00 nos. 71.71

87 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 186.00 Mtr. 82.82

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (a)with medium class Rigid PVC pipe and

accessories (b)2 wire 2.5 sq. mm [1-4-1]

88 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 80.00 Mtr. 147.46

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories, (b) 2 wire 6 sq. mm

89 Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv 14.00 Mtr. 46.46

grade ISI marked copper wires of following size to be erected as directed. e)

1.50 Sq.mm 3 core round PVC sheathed [1-4-5]

90 Providing & erecting Switch board for Computer or electric apparatus 2.00 Nos. 1133.22

consisting of following modular type accessories mounted with PVC/

Metallic concealed/ open box with single mounting base frame covered with

textured/ metallic/ white front plate, modules erected with necessary

connections as directed 1 no. 6A/ 16A universal plug-switch combined.,

nos. 6A Switch, 3 nos. 6A 5 pin Plug, For Modular Type Accessories, Cat-III

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

91 providing and erecting Miniature circuit breaker single pole 6A to 25A 8.00 Nos. 112.11

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark,

Cat-III [3-10-1-B]

92 providing and erecting Miniature circuit breaker single pole 0.5A to 2A 14.00 nos. 270.68

system and having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/ 1996 with ISI Mark [3-10-1-A]

93 Providing & erecting 240 V MCB double pole switch for lighting Load (B 8.00 Nos. 278.76

Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing

box having following capacity (A) 6 to 32 Amp. Cat.III [3-10-3]

94 Providing and erecting Sheet Steel powder coated MCB distribution board - 4.00 nos. 885.77

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs. (The DBs should be used of same company of

MCB to be used) suitable for (A) single phase incoming and horizontal

single phase outgoing, (b) sheet steel double door (IP-43), (ii)6 way [3-11-5-

95 Plastic enclosure fitted with DIN rail suitable for incorporating One / Two 2.00 nos. 52.52

nos. MCB [3-11-2]

96 Approved make ELCBs/ RCCBs conforming to IS: 12640 and having 2.00 Nos. 2235.13

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and

suitable for operation on single phase 240 V having characteristic of quick

action & tripping with all advance feature & do not incorporate any electronic

component for following Max. rating erected as directed (ii) 40 A DP, Cat-III

97 Supplying & erecting earth pit of minimum bore dia.150mm size approved 2.00 Nos. 4591.46

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber and

heavy duty cover. (A)(approved make OEM has to submit test certificate

including value of earth resistance of installation duly stamped and signed

by agency and officer Incharge has to ensure the value of earthing resistane

mentioned in test Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be submitted by

Agency. (a) For Electrical Installation up to 440V in normal soil, Length of

pipe - 1 Mtr, Back filling compound - 1 Nos Bag of 15 Kg. [3-14-9/a]

98 Providing and erecting Annealed bare Copper wire 8 to 16 SWG.[3-14-4] 2.00 kg. 794.87

99 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable Aluminium 240.00 Mtr. 92.92

conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables. (B) 2 core 6 Sq. mm [4-3-1]

100 Providing and, fixing heavy duty flange type brass cable gland with rubber 28.00 Nos. 38.38

ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (B) 2 to 4 core 6 Sq. mm [4-6-

101 Solderless crimping type Aluminium lugs conforming to IS suitable for cable 28.00 Nos. 6.06

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/ cadmium plated nut bolts in an approved

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

102 Making trench in soft soil of suitable width of 90 cm deep for laying cable or 120.00 Mtr. 55.55

locating the fault all over the run and back filling the same and making the

surface as normal ground. [4-5-1]

103 Providing & laying approved make Double walled corrugated pipes (DWC) 124.00 Mtr. 62.62

of polyethylene (conforming to IS 14930 II )with necessary connecting

accessories of same material at required depth in existing trench for laying

of cable. below ground / road surface for enclosing cable, (A)50 mm outer

104 Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 10.00 Nos. 2629.03

Star rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent

ferrite magnet Motor, class of insulation: B, Rust free 3 nos. Aluminium

blades, 2 nos. canopies, shackle kit with earthing provision, copper winding,

Power factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air delivery

minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD <

10%, compitible with electronic regulator unit for Speed Control and all

remaining accessories including safety pin, nut bolts, washers, temperature

rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and rectifier

circuit with surge, over current and overload protection , 50 Hz, Single

phase AC Supply, earthing etc. Complete as required. [Make shall be

approved by Engineer in Charge] (A) 1200 mm Sweep (48") [5-1-8]

105 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the 10.00 Nos. 108.07

RCC bars up to 50mm length each side and pierced through a 16 Gauge

M.S. box/ Heavy Duty PVC box complete erected concealed in Ceiling with

necessary finishing. [5-2-3]

106 Supplying & erecting approved make low noise decorative exhaust fan 2.00 nos. 1703.87

having square frame ABS body with inbuilt lowers & square frame.200mm

with 1350RPM Cat.II [5-3-3]

107 Supplying and erecting B class galvanised iron pipe 32 mm outside dia 45 10.00 Nos. 343.40

cm long duly welded on 20 cm x 20 cm x 3 mm thick M.S. base plate,

erected on wall or corner for mounting street light luminaire with necessary

hardware materials duly painted. [6-5-6]

108 Supplying & erecting approved make Digital time switch having lithium cell 6 2.00 Nos. 3168.37

years operative and operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD display. Also

comprised permanent ON/OFF switching. Programming switches & housed

in fire proof thermoplastic enclosure & transparent cover erected as required

with necessary connection erected as directed. [6-7-2]

109 Supplying & erecting power contactor ,AC3 duty for time switch complete 2.00 nos. 1883.65

erected as per direction Cat III, (B) 2 pole 250V 32 Amp. [6-7-5]

110 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 12.00 nos. 535.30

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/ CRCA/ aluminium

die cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/ name 160V to 270V, Power Factor more than 0.95,

THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85, lumens/ watt

LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates),

(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings. The Engineer incharge may select any wattage capacity between

the ranges shown.) (A) Tube Light with integral driver, (v) 36-40 Watts,

Surge-2 KV, IP-20, conventional 4 feet, Cat-III [2-15-1]

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

111 Supplying and erecting led lamps with following wattage capacity of 220 to 4.00 Nos. 112.11

240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection, Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5(A) LED Lamps integral type, with PC diffuser

suitable LAMP holder, (ii) 8 watts, Cat-III[2-15-2]

112a Supplying and erecting LED street light / Flood light fittings with High power 10.00 Nos. 4997.48

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to 270 V,

Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt. LED

driver efficiency > 85 %.(fittings required LM-79 & LM-80 certificates)

(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings. The Engineer incharge may select any wattage capacity between

the ranges shown.) (A) Street Light (IP-65), Surge protection- 4KV integral

and ,Light must have 440VAC line supply with over-voltage protection. (ii)

above 48 to 60 Watts, Cat-lll [2-16-2]

112b (C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot 4.00 nos. 4819.72

and spun aluminum canopy fixed with opal polycarbonate, pipe arrangement

for vertical mounting driver and accessories wired upto terminal block. IP

65, (ii)32-40W, Cat-III

113 Supplying and erecting LED Solar street lights with High power White LEDs 4.00 nos. 21364.53

wattage of 1Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with company mark/name

engraved or embossed with 36 hours battery backup & MPPT 24V,7.5 A

charge controller with 12 hours automatic switch on/off with wind speed

resistance 44 m/s as per IEC 61215, (C) 21W, IP-65, PV Module – 100W

and 5 mtr poles complete erected [2-17-1]

114a Supplying & erecting approved make SMC press moulded composite FRP. 14.00 nos. 543.38

loop-in, loop-out approx. 2mm thick box complete with Bakelite connector

strip 5way(3P+N+E),DIN rail for mounting mob & hinged doors as per

requirement having locking arrangements with mounting clamp with nuts,

bolts & washers suitable for erection on pole with cable clamps& earth bolt

of following size of box. (F) 200mm x 180mm x 100mm [deep] [6-4-3]

114b (J) 505mm x 240mm x 160mm [deep] 2.00 nos. 2904.76

115 Supplying & Erecting floor mounted/ table top single phase 50Hz water 2.00 nos. 11557.43

dispenser with SS 304 food grade cold tank specification having three water

tap of hot/cold/ambient water function, LED display with storage capacity

from 2.5 Ltrs to 3.2 Ltrs, cooling capacity 2.5ltrs/hr, including refrigerant with

20ltrs refrigerant storage capacity compartment inclusive 1No.water topping

bottle [8-14-5]

116 Supplying & erecting 5 stage single reverse osmosis water purification 2.00 nos. 8431.48

system with M.S. powder coated frame, prefilter housing with 'O' ring

presediment filter GAC filter, carbon filter suitable buster DC pump capacity

80 psi, mention with 40 psi inline type post carbon filter auto low & high

pressure switches with following size of storage tank & LPH capacity &

erected as directed, [A] 10 Ltr / Hr with 7 Ltr StorageTank [8-13-6]

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

Rs. Fifty One Lakh Seventy Three Thousand Nine Hundred and Twenty Four Only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge

for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per

actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the

rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the mix design for different grades of cement concrete at his own cost before

execution as directed and to be approved from the Engineer in charge.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Limkheda (R & B) Sub Division, Dahod (R & B) Division, Dahod (R & B) Division,

Limkheda Dahod Dahod