Loading…
Loading…
Tender Value
₹51.8 Cr
EMD Value
₹1.0 Cr
Closing Date
28 Aug 2026, 2:00 pmDue today
Yes (up to 3 members)
No
Two Packet System
Normal Tender
Yes
05/08/2026 11:00
Lowest to Highest
90 days
Expenditure
Capital (Works)
GSU/SPJ
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to beexecuted by the subcontractor(s), and shall be submitted along with theoffer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibilitycriteria as follows: The subcontractor shall have successfully completedat least one work similar to work proposed for subcontract, costing notless than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway.
In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing. Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Any Civil Engineering work involving PCC/RCC.
27 conditions · 9 needing a document upload
Documents to be Submitted Along with Tender (i) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm /Company / Joint Venture (JV) /Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer (s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card alongwith their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm,company, association, trust or society, as the case may be. (ii) Following documents shall be submitted by the tenderer:
Following documents shall be submitted by the tenderer incase of Sole Proprietor ship Firm: Following documents shall be submitted by the tenderer in case of HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to acton behalf of HUF.
Following documents shall be submitted by the tenderer in case of Company registered under Companies Act 2013: (i)The copies of MOA (Memorandum of Association) /AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.
Following documents shall be submitted by the tenderer in case of LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and createliability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry /Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids,either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members.
The tenderer shall clearly specify that the tender is submitted on behalf of a partnership firm. The following documents shall be submitted by the partnership firm, with the tender: (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar.(ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and createliability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid in eligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract (IRGCC).
Following documents shall be submitted by the tenderer incase of Registered Society & Registered Trust (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) Acopy of Rules & Regulations ofthe Society.
In case of any information submitted by tenderer is found to be false, forged or incorrect after the award of contract, the contract shall be terminated. Bid Security, Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of upto Five years.
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the Railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect anyrights of the Railway thereunder.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer should see the website for the corrigendum/addendum to the NIT/tender document, if any that may be uploaded prior to tender opening (inclusive) as there will not be any separate communication for that.
Any conditional offer will be summarily rejected.
For those conditions for which standard formats have been given in the uploaded document titled-Formats for uploading of various format. The information should only be submitted in these standard formats.
Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
Taxes as per GST (1st july2017), Royalty etc. will be recovered as per extant instruction on the subject.
Note for Commercial compliance :-
In case of items 1 and 08 of Commercial Compliance, supportive documents/certificates from the organizations with whom they worked/are working should be enclosed.
Certificates from private individuals for whom such works are executed being executed is not acceptable.
BOOKS OF REFERENCE: These tender documents are to be read with the followings books with versions updated/corrected/modified up to the date of tender opening: 1) Standard General Conditions of Contract April 2022 as amended by updated correction slips termed GCC 2022. 2) CPWD DSR- 2021/2023 3) E.C.Railway Engineering department unified standard schedule or rates 2021 as amended by updated correction slips (termed USSOR, 2021) up to the date of tender dropping. 4) Standard specifications contained in Indian Railways Hand Book Specifications (works and materials)2010. These four books are where-in-after called the "Books of reference" and shall govern this tender as well as the contract resulting from the acceptance from this tender, to the extent that these contents do not conflict with the contains of the various chapters of these documents.
Tenderer are advised to visit the site of work to ascertain all respect of the site condition viz accessibility, availability of approach road, nature of the soil, availability of material availably of labor etc. that may be encountered in course of execution of work.
Tenderer should see the website for the corrigendum/addendum to the NIT/tender document, if any that may be uploaded prior to tender opening (inclusive) as there will not be any separate communication for that.
It is responsibility of the tenderer to see corrigendum, if any, to tender notice up to the date of tender opening. IRSGCC-2022 ( Works Matter) uploaded for reference only. Any correction issued by competent authority up to date of opening will be applicable. Tender should quote accordingly.
All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General instructions are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
(1) Phase-I Balance work of Parking, Drain, Boundary wall, Landscaping of ABSS station at SLNA, SBV, BNKI, SOU, LSI in the jurisdiction of Dy.CPM/GSU/SPJ. (2) Work of Parking, Drain, Boundary wall, Landscaping of ABSS station at JYG, JNR, SKI & Part-III station building at SKI and holding area at JYG. (3) At Jhanjharpur - Provision of new station building along with facade, CA and improved PA for development of station under ABSS.
SPJ-GSU-2026-27-001
SPJ-GSU-2026-27-001
Open
Works - General
10 Months
Purbi Champaran, Bihar
₹0
₹1.0 Cr
28 Aug 2026
7 Jul 2026
14 Aug 2026
5 Aug 2026
57 items across 5 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,29,98,893.95 | ||
| — | 2587.50 | — | — | ||
| Decorative painting of mythologicaldrawings/ sceneries/ realistic figureshaving the theme of Madhubani/Nature/ Greenery or similar types ofhand painting on the wall Surface or vertical metallic surface or in frame with oil/synthetic enamel paint includingbackground colour complete in all respect as per direction of Engineer-in-charge. | — | — | — | 68,18,062.5 | |
| — | 690.00 | — | — | ||
| Providing & fixing PU Tactile 01 (DIRECTIONAL) Dimension 300*300*7.3 mm fixing. Self adhesive tape including all taxes, charges, all L&M, T&P as a complete job. Nothing extra will be paid whatsoever the case may be. | — | — | — | 24,12,964.5 | |
| — | 690.00 | — | — | ||
| Providing & fixing PU Tactile 02 (WARNING) Dimension 300*300*7.3 mm fixing. Self adhesive tape including all taxes, charges, all L&M, T&P as a complete job. Nothing extra will be paid whatsoever the case may be. | — | — | — | 24,12,964.5 | |
| — | 40.00 | — | — | ||
| Providing and fixing for wall panelling 9 mm BWP water proof marine Ply on plain wall surface. | — | — | — | 59,159.2 | |
| — | 40.00 | — | — | ||
| Providing & Fixing marino acrylic Sheet on wall panelling including all fittings ,Pasting with special adhesive, lock bond with steel groove partition between joints. | — | — | — | 93,609.2 | |
| — | 20.00 | — | — | ||
| Supply of 12mm saint gobin or equivalent crystal clear glass of requires size for partition. | — | — | — | 5,488.8 | |
| — | 20.00 | — | — | ||
| Charges for making 12mm froasted for privacy / durability /safety purpose and installation charges of mm glass including cutting,bending,edge finishing with all fitting and fixing | — | — | — | 3,792.2 | |
| — | 10.00 | — | — | ||
| Providing and fixing health faucet (KUP35041PM) 2 a bib cock with wall flange,water jet spray,hand shower ALD 573 (health faucet) with 8mm dia 1.2 m long flexible tube and wall hook | — | — | — | 49,270.5 | |
| — | 10.00 | — | — | ||
| Providing and fixing toilet roll holder( CAN-1153S) with stainless steel flap. | — | — | — | 12,948.7 | |
| — | 10.00 | — | — | ||
| Providing and fixing soap disc holder (CAN 1131N). | — | — | — | 8,117.9 | |
| — | 4.00 | — | — | ||
| Providing and fixing Basin faucet concealed part (ALD-441)regular body of single concealed stop cock (composite one piece body) with cartridge exposed part ( KUP-31441KPM) exposed part kit of single conceal stop cock consisting of operating lever, cartridge sleeve, wall flage (with seals) and Basin spout (compatible with ALD -441) | — | — | — | 18,599.12 | |
| — | 10.00 | — | — | ||
| Providing and fixing towel ring (CAN-1121BN) round with round flange | — | — | — | 10,452.3 | |
| — | 4.00 | — | — | ||
| Providing and fixing curved shape urinal partition with froasted glass 8mm,10mm( 1810-UC/1110UC) | — | — | — | 23,477.28 | |
| — | 4.00 | — | — | ||
| Providing and fixing soap dispenser with glass bottle ( CAN-1135N) | — | — | — | 5,751.88 | |
| — | 10.00 | — | — | ||
| Providing fitting and fixing of Modular toilet Enlosure made out of 12mm thick highn pressure laminate of approved colour and texture with door size 1925mm(H)X600mm(W) divider size 2100mm (H) overall height of cubical 2100mm (including bottom gap of 100mm) of Marino or equivalent make including cost of all fittings,accessories,labour etc. all complete as per direction of Engineer-in-charge. | — | — | — | 4,59,064.7 | |
| — | 10.00 | — | — | ||
| Providing and fixing wight vitreous sensor operated gents urinal having pre and post flushing with water having water inlet from backside, including fixing of controll plate( made of stainless steel-sensor) to wall with suitable brackets all as per manufactureres specification and direction of Engineer-in-charge | — | — | — | 2,78,332.9 | |
| — | 10.00 | — | — | ||
| Providing and fixing of Metropole flush valve dual flow (3ltr/6ltr) with 40mm size with concealed body made of stainless steel Jaquar make product code FLV-CHR-1093NSO (Premium quality) as per direction of Engineer in charge. | — | — | — | 42,812.8 | |
| — | 100.00 | — | — | ||
| Supplying,fitting and fixing 10mm th. Hollow multiwall white/coloured polycarbonate sheet of approved shade and design as per IS complete. | — | — | — | 1,47,214 | |
| — | 2.00 | — | — | ||
| Supplying of 2HP motor with starter of approved quality including all taxes complete is all respect. | — | — | — | 48,301.58 | |
| — | 150.00 | — | — | ||
| Supply fiting fixing of electric wire for connecting motor of approved quality including all taxes complete in all respect. | — | — | — | 19,759.5 | |
| — | 1.00 | — | — | ||
| Fixing of electric motor and starter of 1HP/2HP capacity complete in all respect. | — | — | — | 4,939.93 | |
| — | 4.00 | — | — | ||
| Providing and fixing wall mounted EWC (ARS-WST-39953BUIUFSN)rimless wall hung WC with UF soft close sheet cover, hinges,accessories set of size 345x490x360mm. | — | — | — | 63,809.96 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Pre-BidConferenceLetter_2.pdf
ATTACHMENT
AdvanceCS1to11_merged_compressed.pdf
ATTACHMENT
TenderDocument1.pdf
ATTACHMENT
inclusionofUDINintenderdoc.pdf
ATTACHMENT
LetterofCredit.pdf
ATTACHMENT
InstructionforincorporatingtheJPO_1.pdf
ATTACHMENT
CorrigendumformeasurementpolicyRBletter28.03.25.pdf
ATTACHMENT
TestcheckMeasurementpolicyRBletter02.08.24.pdf
ATTACHMENT
SPJTenderDoc05.08.2026C.pdf
ATTACHMENT
pre-bid05.08.2026.pdf
ATTACHMENT
pre-bid05.08.2026.pdf
CORRIGENDUM
TestcheckMeasurementpolicyRBletter02.08.24.pdf
CORRIGENDUM
Pre-BidConferenceLetter_2.pdf
CORRIGENDUM
SPJTenderDOC13.7.26.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].