Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹12.6 Craccepted-aoc | accepted-aoc |
Tender Value
Refer Docs
EMD Value
₹15 L
Closing Date
7 Sept 2026, 4:00 pmClosed
Karnataka Industrial Areas Development Board
Assistant Executive Engineer-Ele
Providing alternate power source to Adinarayana Hosahalli Industrial Area, Phase-2, Doddaballapura Taluk, Bengaluru Rural District.
KIADB/2026-27/EL/WORK_INDENT499
KIADB/2026-27/EL/WORK_INDENT499
Open
Electrical
Two Tender Document System(Two Cover)
KIADB Head Office Bangalore
3 documents required · 3 mandatory
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period i.e. (2021-22 to 2025-26) Satisfactory completed (at least 90% of the contract value), as a prime contractor, at least One Similar Work such as Providing 11KV Feeder lines, to an extent of not less than 50% of the amount put to tender (i.e., Rs.600.00 lakhs)
Executed in any one financial year, the following minimum quantities of work (Supply & Erection) (80% quantity of work put to tender): Certificates of proof shall be enclosed from competent Authority not below the rank of Executive Engineer in Government / Public Sectors/Government Undertaking Organizations. (Quantities executed certificates issued under Joint Venture shall not be considered). (1) 11kV 3Cx400sqmm HTUG cable: 19.36 Km, (2) Compact RMU - 1way/3way: 28 Nos
Each Tenderer should further demonstrate: Availability by owning at least 50% of the required / specified key and critical equipment for this work. The remaining 50% can be deployed on lease / hire basis for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work are furnished : (Furnish details of plant / machinery / equipment etc.,) Tenderer shall have own ladder mounted jeep vehicle, excavator & crane (Hydra) 10 Ton Capacity on lease / Hire basis
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity: (AxNx1.5 - B), where, A : Maximum value of Electrical engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N : Number of years prescribed for completion of the works for which tenders are invited. B :Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 09 Months.
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period i.e. (2021-22 to 2025-26) Achieved in at least two financial years a minimum financial turnover of Rs.2400.00 Lakhs. (Electrical Contract Works Only) (Not less than 2 times the amount put to tender).
Each Tenderer should further demonstrate: liquid assets and /or availability of credit facilities of not less than Rs.360.00 lakhs (Credit lines/ letter of credit/ certificates from Public sector banks/Nationalized Banks (as per RBI guidelines) not less than 30% of the amount put to tender for meeting the fund requirement etc)
₹7,500
₹15 L
7 Sept 2026
24 Aug 2026
8 Sept 2026
29 Aug 2026
29 Aug 2026
Providing alternate power source to Adinarayana Hosahalli Industrial Area, Phase-2, Doddaballapura Taluk, Bengaluru Rural District.
PARTA-: Running 11KV Express feeder :
Supply of 11kV, 3 Core HTUG XLPE Insulated Cables as per IS-7098 (Part-2) 2011 with following parameters & as per BESCOM Requirements: a) Insulation manufactured ...
Supply of Heat Shrinkable indoor Type Cable Termination Kit for XLPE Cable with all lead and lifts complete as per specifications and directions of engineer in charge. 3Cx400 Sqmm
Supply of Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable with all lead and lifts complete as per specifications and directions of engineer in charge. 3Cx400 Sqmm
Supply of Heat Shrinkable Straight Through Jointing Kit for XLPE Cable with Copper Lug & Al Ferrule with all lead and lifts complete as per specifications and directions of engineer in charge. 3Cx400...
Supply of GI Pipe, 150 mm Dia for drain crossing, cable raising etc., with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts complete as per specifications and directions of engineer in charge.
Laying of high tension 11 KV(E) 3 core 400 sqmm in existing trench/GI pipe/stone ware/RCC Hume pipe using wooden aluminum rollers with all lead and lifts complete as per specifications and directions ...
Laying of UG Cables by Trenchless Technology (HDD) by adopting Horizontal Boring & Drawing of cable including preparation at site with all lead and lifts complete as per specifications and directions ...
Laying of UG Cables by Trenchless Technology (HDD) by adopting Horizontal Boring & Drawing of cable including preparation at site with all lead and lifts complete as per specifications and directions ...
Laying of UG Cables by Trenchless Technology (HDD) by adopting Horizontal Boring & Drawing of cable including preparation at site with all lead and lifts complete as per specifications and directions ...
Providing HDPE pipe grade PE100-PN12.5, 160 mm with all lead and lifts complete as per specifications and directions of engineer in charge.
Making of straight through joint 3CX400 Sq MM with all lead and lifts complete as per specifications and directions of engineer in charge.
Making of cable termination (outdoor termination kit) 400 sqmm with all lead and lifts complete as per specifications and directions of engineer in charge.
Making of cable termination (indoor termination kit)400sqmm with all lead and lifts complete as per specifications and directions of engineer in charge.
Laying of GI Pipe, 150 mm Dia for drain crossing, cable raising etc.,with all lead and lifts complete as per specifications and directions of engineer in charge.
Fixing of Earthing materials pipe type for
grounding (Single Electrode with accessories) with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC- 62271/IS-3427 with all lead and lifts complete as per specifications and directions of engineer in charge. 1OD
Supply of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC- 62271/IS-3427 with all lead and lifts complete as per specifications and directions of engineer in charge. 3 Wa...
Bed Concreting with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates with all lead and lifts complete as per specifications and directions of engineer in charge.
Foundation with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying, fitting and placing Mild Steel Reinforcement with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying of Frame of MS Channel 100x50 mm and MS angle 40x40x5 mm welding etc., with all lead and lifts complete as per specifications and directions of engineer in charge.
Rod type earthing with 40mm Dia, 3 Mtr long MS rod as per specification & drawing including digging of pit & fixing with all lead and lifts complete as per specifications and directions of engineer in...
Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint Brush etc., with all lead and lifts complete as per sp...
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....
Earth Excavation for RMU Foundation depositing of earth on bank with all lead and lifts complete as per specifications and directions of engineer in charge. Transformers foundations
Refilling and consolidation with all lead and lifts complete as per specifications and directions of engineer in charge.
Labour Charges for Construction of Bed Concreting with all lead and lifts complete as per specifications and directions of engineer in charge.
Labour charges for Fixing foundation frame of MS channel 100x50 mm and MS angle 40x40x5 mm welding, fixing in concrete, aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from ...
Providing and fixing GI chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts bolts and washers as required complete as per the direction ...
Supplying & fixing M.S rectangular poles made out of 2 equal angles of 65* 65*6 mm welded together & fixed in cc (1:2:4) with 2 nos 16mm dia M.S hold fast rods each of lenth 25 cms, Including cost of...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid Document.pdf
Tender Document • 1.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .