Construction of Paver Block road from Sudhan Majumder house to Satsangha Ashram and Subhash Colony road to Dilip Debnath house (L-0.200KM) under Santirbazar Municipal Council

Earthwork in excavation for structures as per drawing and MoRD technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of side

Filling in foundation trenches as per drawing & MoRD technical specification Clause 305.3.9, 1200

Providing concrete for plain concrete ( using jhama brick aggregate ) in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centring, shuttering, staging etc. but excluding reinforcement)

Brick masonry work in cement morter in Sub-structure complete excepting pointing & plastering as per drawing & MoRD technical specifications Clauses 602,603,604,1202 & 1204

Plastering with cement mortar (1:4) 12 mm thick on brickwork / C.C. work including a finishing coat of neat cement punning with 2.75 Kg of cement per sqm in substructure as per MoRD technical specification Clauses 613.4 & 1204

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m,transporting to site,spreading,grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with alead up to 1000m as per MoRD Technical Specification clause 301.5.

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads,transporting to site,spreading,grading to required slope and compacted to meet requirement of Table 300.2 as per MORD Technical Specification Clause 303.1

Providing and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical Specification Clause 412

Providing and laying brick edging laid lengthwise on prepared subgrade according to lines,grades and cross section shown on the drawing ,filling joints with Earth,free from clay with a Plasticity Index not exceeding 6,watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical Specification Clause 412

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of sand, filling the joints with fine sand etc. all complete as per specification and approval/ direction of the Engineer-in-charge.

Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.

Providing concrete for plain/reinforced concrete in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement).