repainting of type III staff quarters and other minor civil works

Amount

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in charge.In cement mortar

Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete

15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surfaceWater thinnable cement primer

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade One or more coats on old work

Finishing walls with Acrylic Smooth exterior paint of required shade,Old work(One or more coat applied @ 0.90 ltr/10 sqm).

providing and fixing stainless steel mosquito net with 13/4'' mosquito outer fram and pvc clear rubber,including all fittings, cleat ,screws and scaffolding charge etc all complete as per the direction of engineer in charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement andmatching pigment etc., complete.

Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings,pvc conection and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid Approved Makes: parryware,hindware,cera or equivalent

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 15 mm nominal bore

Providing and fixing PVC pipes including all PVC plain fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good thewalls etc 25 mm(10kg/cm2) nominal outer dia Pipes

Providing and laying PVC pipes(working pressure 6 kg/cm2) including all PVC fittings This includes jointing of pipes & fittings with one step PVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. 110mm dia

Providing and fixing approved make Health faucet with flexible pipe and wall hook, 1no. CP brass angle valve of approved make with CP cup as directed by Engineer-in-charge.

providing and fixing 2''pvc ball valve including charge of pvc bond all complete as per the direction of engineer in charge.

providing and fixing 1''brass float valve with ball including charge of FTA, pvc bond all complete as per the direction of engineer in charge.

providing and fixing 1''pvc ball valve including charge of pvc bond,coupling, 1''pvc pipe and scaffolding charge etc all complete as per the direction of engineer in charge.

K V SARATHKUMAR