CERTAIN MISC BR REPAIR TO HARDSTANDING KERB STONE DRAIN ETC AT AF STN JODHPUR UNDER GE AF JODHPUR

Amount

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete block walling complete all as specified and as directed.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and disposing of debris outside MD land complete all as specified and as directed.

M&L for precast cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, completed all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on block masonry including finished even and smooth (without using extra cement) completed all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) in fire lane, sub bases, floors and pavings completed all as specified and directed.

M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in sub floors complete all as specified and directed.

M&L for vitrified heavy duty parking tiles coloured, matt finish, unglazed and unpolished of size 300x300x10mm thick laid over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L for cleaning the surface of road/ pavements by brushing with wire brushes for removing caked mud etc, sweeping with compressor air blower to remove all loose dust and dirt etc/ taking out dust/ existing material with compressed air and making the surface free from dust, drying the surface and applying one coat of bitumen cold emulsion by using self propelled emulsion machine, distribution uniformly or towed emulsion pressure sprayer, equipped for spraying the emulsion uniformly in one coat in ratio 1:1 (cold emulsion : water) and ensure uniform finish of total area complete all as specified and directed.

M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like on roads pavements with hot applied thermo plastic retroreflective road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and necessary earthwork required at site complete all as specified and directed.

M&L for preparing newly untreated surfaces of brick, stone, concrete, asbestos cement or plaster surface of any description over 10cm girth or width, not otherwise described and applying two coat of synthetic enamel paint over and including a coat of primer complete all as specified and directed.

M&L for preparation of old painted surface applying one coat of synthetic enamel paint on brick, stone, concrete, asbestos cement or plaster surface of any description over 10cm girth or width, not otherwise described complete all as specified and directed.

M/S HARI CONSTRUCTION

Om Trading Corporation

suryabuildtechdevlopers

VIKAS CONSTRUCTION CO.