Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.9 LAccepted-AOC 93 BAPUJI NAGAR ITC ROAD SAHARANPUR 247001 UP | SAHARANPUR | UTTAR PRADESH | 247001 | L1 | Accepted-AOC Awarded being L1 | |
| 2 | L2₹24.6 L+₹63,284 (2.64%)Rejected-AOC GALI NO 3 AZAD COLONY MAZRA HARIDWAR ROAD DEHRADUN UK INDIA NO E 29 HQ CWE DDN | L2 | Rejected-AOC Being not L1 | |
| 3 | L3₹25.9 L+₹2.0 L (8.22%)Rejected-AOC WZ 199 LAJWANTI GARDEN GALI NO 4 NEW DELHI 110046 | NEW DELHI | DELHI | 110046 | L3 | Rejected-AOC Being not L1 | |
| 4 | L4₹25.9 L+₹2.0 L (8.29%)Rejected-AOC 599 LANE NO 13 RAM NAGAR ROORKEE HARIDWAR UK | L4 | Rejected-AOC Being not L1 | |
| 5 | L5₹25.9 L+₹2.0 L (8.32%)Rejected-AOC | L5 | Rejected-AOC Being not L1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
26 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (MES) ROORKEE
GARRISON ENGINEER (MES) ROORKEE
COMPREHENSIVE MAINT TO CERTAIN BUILDINGS IN POCKET 5 AND 6 UNDER AGE B/R-II OF GE ROORKEE
2023_MES_592110_1
8392/262/E8
Open Tender
Civil Works
Item Rate
180 days
ROORKEE
PLEASE REFER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE (MES) ROORKEE
₹80,000
Yes
21 Aug 2023
28 Apr 2023
29 May 2023
28 Apr 2023
26 May 2023
12 May 2023
Amount
Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete all as directed.
Material and Labour, for pre-painted, galvalume aluminium zinc coating GI based profiled steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa AZ-150, as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
M & L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed by engineer in charge.
Material and Labour for Steel tubular Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to I. S.1161- 1979 grade Fe-290 (GdeSt.-165 complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as directed.
S&F 6mm thick designer non asbestos cement building board of size 60 cm x60cm fixed of laid inserted to GI frame work using main tee of size 24x38x0.5 mm and cross tee of size 24x28x0.5 mm made out of PGI sheet 0.30 mm thick doubled at web and single flange ,flange cover with powder coated sheet 0.25 mm thick for ceiling suspended with GI wire 4 mm dia upto 2 mtr long complete all as speified and directed. (Note:- If any minor electricial fittings and fixtures disturbed there-in will be match and fixed as existing).
Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed .
Material and labour for brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) complete all as specified and as directed.
Material and labour for except brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) complete all as specified and as directed.
Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar (1:6) using coarse sand on fair faces of brick work of concrete surfaces of walls, finished even and smooth (without using extra cement) complete all as specified and directed.
M & L for 15 mm thick rendering on wall/concrete surface with cement mortar 1 : 4 finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for rendering 10 mm thick in cement (1:3) on fair faces of concrete as in ceiling, finished even and smooth without using extra cement including taking out cement plaster from ceiling surfaces complete all as specified and directed.
Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth all as specified and as directed by engineer in charge.
M&L preparation of newly plastered surfaces of walls / ceilings and applying two coat OBD over a coat of primer all as specified and directed.
M&L preparation of newly plastered surfaces of walls / ceilings and applying two Cement Base paint over a coat of cement primer all as specified and directed.
M/L for preparation of newly plastered surfaces of walls and applying three coat of white wash complete all as specified & directed
M/L for preparation of newly plastered surfaces of ceilings and applying three coat of white wash complete all as specified & directed
M&L for preparation of old decorated surfaces (plastered/ un-plastered) of ceiling incl cornices by brooming down with steel brush, scrapping down smoke soot, moulds, moos and efflorescent salts and trading oil and greasy spots and applying One coat of white wash on ceiling complete all as specified and directed.
M&L for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying one coat of cement base paint complete all as specified and directed.
M&L for preparation of old decorated wall surfaces including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying one coat of distemper oil bond emulsion by using rollers complete all as specified and directed.
Taking down old U/S wooden /steel chowkhat with shutter nexc 1.50 sqm each and removing from site complete all as specified and directed.
All as per item No. 23 above but exc 1.5 and nexc 4 sqm complete all as specified and directed.
Taking downold U/S shutters of any description exc 1 sqm and n exc 2 Sqm each and removing from site complete all as specified and directed.
Taking down shutter from the frame of any discription n exe 2 sqm each and refixing in same opening in same openinig and necessary repair complete all as specified and directed.
M&L for factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, tower bolt complete with glazing bars, dovetailed or welded including guard bars as shown on drawings including shop coat of primer complete all as specified and directed.
M&L for factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, towe bolt complete with gauzed bars, dovetailed or welded including shop coat of primer complete all as specified and directed.
M&L for Steel ventileter with top hung shutters including projecting type hinges with MS handle, and MS peg stay, including tower bolt complete with glazing bars, dovetailed or welded including guard bars as shown on drawings including shop coat of primer complete all as specified and directed.
S&F framed work such as grills gratings, etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars barred iron doors, door chowkat , ladders; framed balusters; walk ways; railings; framework of water tanks, hold fast, sheet and similar work conforming to Fe-410-0 or Fe 310-0
M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification of drawing complete all as specified and directed.
M&L for Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification of drawing complete all as specified and directed
S&F factory made 35 mm thick Plain framed, panelled shutter (two or more panel) single or double leaf with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated factory made complete all as spcified and directed
S&F factory made 35mm thick 2nd class hard wood glazed and skelton shutter (two or more panel) single or double leaf open rebated and prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR Pt-I, section-8, clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.
S&F 30 mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR Pt-I, section-8, clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed.
S&F PTMT Butt hinges 100 mm make Prayag complete all as specified and directed
S&F 150 mm long PTMT tower bolt of complete fixing to door complete all as specified and directed
S&F 150 mm long PTMT handle bolt of complete fixing to door complete all as specified and directed
S&F 100 mm size medium grade MS butt hinges complete all as specified and directed
S&F 150 mm long Aluminium handles, cast type, conplete all as specified and directed.
S&F Aluminium barrel tower bolt of extruded section 150 mm long conplete all as specified and directed.
S&F 300mm long Aluminium sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door 300 mm long,3 nos hinges 100 mm sizemortice lock 3 lever 100 mm size,anodised aluminum snap beading screws including power coating of any color complete all as specified.
S&F in repairs anodised aluminium frame for door , windows, with one or more rebates including joininig cleat for fixing including powder coating of surface complete all as specified and directed
S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) 2 nos tower bolt in each shutter including powder coated complete all as specified and directed
S&F in repairs Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, DG -902 all complete as per requirement and direction of Engineer-in-charge.
S&F in repairs 100 mm size mortic lock with 4 lever aluminium anodised body fixed to aluminium door complete all as specified and directed
S&F in reapirs aluminium extruded section Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all fitting and fixer complete all as specified and directed.
S&F in repair mild steel stove enamalled black 300 mm,size ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed
M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed.
M&L for 5mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed.
Fixing only any thick sheet glassinary quality and glazing with oil putty or fixed with beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed.
Hacking out old broken galss (any thickness, size, quality or description) from wooden/metal frames or stone concrete or brick surfaces, glazed with putty or fixed with beads complete all as specified and directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesor MS beads size 2mm to 3mm complete all as specified and directed.
S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesor MS beds size 2 mm to 3 mm size complete all as specified and directed.
M&L Preparing New steel surface of any description over 10 cm width girth not otherwise describe and applying two coat of synthethic enamel paint over a coat of red oxide complete all as specified and directed.
M&L for applying two coat of synthetic enamel paint In new surface over a coat of pink primer on wooden surface exceeding 10 cm in width or girth including preparation of surfaces and including necessary sacffolding complete all as specified and directed.
Demolition of concrete un-reinforced of any description in any position all as directed by Engineer -in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed by engineer in charge.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. all as specified and as directed by engineer in charge.
M&L for 75 mm thick PCC 1:3:6 as in plinth protection surface finish even and smooth without using extra cement complete all as specified and directed.
M&L coloured non skid ceramic tile 7 to 8mm thick (square/ rectangular) area of each tiles exc.0.06 sqm n exc.,0.18 sqm in floor etc. set and jointed with neat cement slurry and pointed in colur cement to match including 15 mm thick screed bed in cm 1:6 complete all as specified and directed.
M&L glazed ceramic tiles 450x350x/6/7/350x250x7/300x200x7mm thick coloured tiles on walls such as skirting and dado and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick in cm (1:4) backing coat complete all as specified and directed.
M&L coloured non skid tile7 to 8mm thick (square/ rectangular) area of each tiles exc.018 sqm n exc. 0.36 sqm in floor etc. set and jointed with neat cement slurry and pointed in colur cement to match including 15 mm thick screed bed in cm 1:6 complete all as specified and directed.
M&L coloured non skid ceramic tile7 to 8mm thick (square/ rectangular) area of each tiles exc.018 sqm and n exc. 0.36 sqm in vertical surface/ suck as skirting and dado etc. set and jointed with neat cement slurry and pointed in colur cement to match including 10 mm thick back plaster in cm 1:4 complete all as specified and directed.
S&F Vitrified Ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles n. exc 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 mm thick screed bed in cm 1:6 complete all as specified and directed
S&F Vitrified Ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles exc 0.36 Sqm, in vertical surface such as skirting and dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 10 mm thick back plaster in cm 1:4 complete all as specified and directed.
M&L machine cut kota stone slab flooring 18-20 mm thick over cement screed base 20mm thick screed bed in bedding layer in cm 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the the slab including grinding, rubbing and polishing , complete all as specified and directed.
M&L except machine cut kota stone slab flooring 18-20 mm thick over cement screed base 20mm thik screed bed in bedding layer in cm 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the the slab including grinding, rubbing and polishing , complete all as specified and directed.
M&L machine cut kota stone slab 18-20mm thick in riser of step, skirting, dado and piller over cement screed base 10 mm thik 1:6 cm laid and jointed with grey cement slurry mixed with pigment to match the shadeof the the slab including grinding ,rubbing and polishing complete including dismantling of existing kota stone skirting with cm backing plaster complete all as specified and directed.
M&L PCC 1:4:8 type D-2 (40mm crushed stone aggt)as in foundation , flooring sub base, mass concrete complete all as specified and directed
M&L for 18 to 20mm thick marble stone as in platforms / counter slab/flooring and laid in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including taking down old stone slab complete all as specified and directed.
M&L 25 mm thick PCC (1:2:4) Type B-1 using 20 mm stone aggt as in sub floor /roof/chajja complete all as specified and directed.
M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations
Taking up or down or chisel to concrete surface of old unserviceable rusted GI tubing and connection including S&F new GI tubing 15 mm bore, medium grade with all fitting and concealed to wall ceiling or laid in floor complete all as specified.
Taking up or down or chisel to concrete surface of old unserviceable rusted GI tubing and connection including S&F new GI tubing 20 mm bore, medium grade with all fitting and concealed to wall ceiling or laid in floor complete all as specified.
Taking up or down or chisel to concrete surface of old unserviceable rusted GI tubing and connection including S&F new GI tubing 25 mm bore, medium grade with all fitting and concealed to wall ceiling or laid in floor complete all as specified.
Dismantling water tanks and removing to store Exc 250 ltr but Nexc 500 ltr capacity including S&F for 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) ISI Mark hoisted and fixed in position including all fitting nipple complete all as specified in SSR Pt-I.
Dismantling water tanks and removing to store Exc 500 ltr but Nexc 1000 ltr capacity including S&F for 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) ISI Mark hoisted and fixed in position including all fitting nipple complete all as specified in SSR Pt-I.
Dismantling water tanks and removing to store Exc 1000 ltr but Nexc 2000 ltr capacity including S&F for 2000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) ISI Mark hoisted and fixed in position including all fitting nipple complete all as specified in SSR Pt-I.
S&F in repair W.C vitreous china, squatting pan orissa patern size 580x440mm white with intergral foot rest & P - or S trap,flush pipie complete excluding cistern complete all as specified.
S&F in repair W.C vitreous china, (pedestal patern ) white (excluding flushing cistern and flush pipes ) including seat cover fixing bolt & P - or S trap,flush pipie complete all as specified.and directed
S&F in repair PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve, float and handle incl brackets and waste pipe connections to pipes of capacity 10 lts complete all as spepciified and directed.
S&F in repair syphon internal fitting kit, handle flush pipe connections to pipes for capacity 10 lts capacity complete all as spepciified and directed.
Taking down refixing refixing of PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve, float and handle incl brackets and waste pipe complete all as spepciified and directed.
S&F stop cock/angle valve 15 mm nominal bore brass chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directeed
S&F in repair CP shower rose with or without swivel joints of 15 mm size complete all as specified and directed
S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.
S&F in repair CP fancy type bib tap cast copper alloy with crutch or butter fly handle, screwed down screwed for iron pipe 15 mm bore of tubing complete all as specified and directed
S&Fin repair Vitreous China wash basin white flat back size 580 x 450mm excluding taps waste, chain and plug, but incl brackets fixed waste pipe complete all as specified and directed.
S&Fin repair Vitreous China wash basin oval type white size 580 x 450mm excluding taps waste, chain and plug, but incl brackets fixed waste pipe complete all as specified and directed.
S&F for 32mm PVC waste pipe for flushing cistern complete all as specified and directed.
S&F in repair 25 mm bore Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed with all necessary fitting and fixer reducer elbow etc complete all as specified and directed
S&F 25 mm bore Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed with all necessary fitting and fixer reducer elbow etc complete all as specified and directed
S&F in repair 15 mm bore cast copper alloy stop valve , fancy type chromimum plated with long shank and cup (concealed type ) screwed down , high pressure, with crutch or butter fly screwed both ends for iron pipr or union and fixed complete all as specified and directed.
S&F in repair 15 mm Fancy type pillar tap cast copper alloy with capstan head chromumum plated screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe fixed complete all as specified and directed
S&F in repair vitreous china urinal half stall type white fixing plugs bedding urinal against wall in cement mortar 1:2 securing to plug with and including 60 mm long brass screws urinal spreader of PTMT any color fixing with 15 mm dia pipe PVC pointing aroung urinal back in cement complete all as specified and directed
S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe vitreous china urinal bowl type white fixing plugs bedding urinal against wall in cement mortar 1:2 securing to plug with and including 60 mm long brass screws urinal spreader of PTMT any color fixing with 15 mm dia pipe PVC pointing aroung urinal back in cement complete all as specified and directed
S&F urinal spreader of PTMT any color for fixing with 15 mm dia pipe minimum weight 50 gm complete all as specified and directed.
S&F in repair PTMT grating round 125 mm dia fixed in cement mortar 1:3 over floor trap with or without hole complete all as specified anf directed
S&F in repair stainless steel Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets all as specified and as directed by engineer in charge.
S&F in repair Stainless steel cromium plated Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F 5 mm thick solid PVC sheet wall lining any pattern,colour,plain, wood grained consisting of 5 mm thick PVC sheet fillet PVC frame work inclusive of solvent cement and fixing at site on complete all as specified and directed.including dismantling of existing pannelling complete including cleaning of surfaces
S&F 5 mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing
S&F in repair MS Chromium plated curtain rail 25 mm dia fixed with brackets knobs fancy type assessories approved by Engr in charge complte all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, such as sunken floor, roof padding etc complete all as specified and directed.
M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips including demolition of unserviceable cover slabs complete all as specified and directed
M&L for providing precast cement concrete 1:2:4 using 20 mm graded aggregate in landings, cover slabs (for man holes etc.) chullah hoods chajja water trough shelves and similars articles with plain face including demolition of RCC slab any type complete all as specified and directed.
Excavation in trenches,n exc 1.5m wide and n exc 1.5m in depth : for foundation etc or for shafts,wells,cesspits,manholes,pier holes,etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm soft/loose soil complete all as specified and directed
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed
Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and as directed by engineer in charge.
S&F in repair 12 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required allas specified and as directed by engineer in charge.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specifeid and as directed.
Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed by engineer in charge.
Preparation old steel surfaces exc. 10 cm width or girth and applying One coat of synthetic enemelled paint including all preparation complete all as specified and directed.
M/S GIRI CONSTRUCTION CO.
M/S MSD & Associate
Nand Associates
RAJENDER CONSTRUCTION CO
M/S RAJESH ARORA
M/S A.K GARG
SMG Construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .