SPECIAL REPAIR TO BLDG NO P 47 AT AFS MANDORE, JODHPUR

Amount

M&L for demolitation of cement concrete of any description and in any position not otherwise specifically providedfor and complete all as specified.

M&L for 100 mm thick cement concrete (1:4:8) type D2 using 40 mm graded stone aggregates as in sub base, filling and mass concrete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Machine pressed pecast cement concrete interlocking paver paver block any shape and sze confirming to IS 15658-2006 of 60 mm thickness in M-35 grade with grey cement and pigment and complete all as specified.

M&L Cement concrete type B-0, 25 mm thick 1:2:4 (12.5mm graded aggregate)

M&L for machine cut Kota stone slab flooring 20-25 mm thick over 15 mm thick screed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for machine cut Kota stone slab 20-25 mm thick on skirting, dado over 10 mm thick rendering in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for dismantling floor heart or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and com[plete all as specified.

M&L for coloured glazed ceramic coloured tiles of size 350x 250x 7mm/450x350x7mm thick on walls/vertical surfaces including 10mm thick rendering in CM 1:4, all as directed.

Taking down chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames)

Taking down chowkhats or frames exc. 1.5 sq. m but n. exe 4.0 sqm each but with shutters (without taking off shutters from the frames)

S & F anodised aluminium frame section for door shutter,window and partition with one or more rebates including joining cleat for fixing and including all necessary fitting and fixes complete all as specified.Note:- Glass and wire mesh shall be measured and paid seperatly.

Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specifiedcomplete all as specified.

S & F in repairs door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

M & L anodised aluminium snap grid of size 605X605 mm frame work for false ceiling all as specified and as directed.

M & L for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

M & L for 4 mm thick asbestos cement plain building boards, fixed to timber framework or to aluminium grid with or without screws complete all as specified.

S&F 5.5 mm thick sheet glass ordinary quality exc 0.5 sqm in each pane frosted on one side complete all as specified.

S&F stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

Taking down old existing roof treatment (APP membrane & plaster ) and removing outside MOD and cleaning of roof slab / chajjas sweeping with brooms removing all loose materials debris etc complete all as specified and as directed by Engr-in-charge

M&L for 50 mm thick (average) cement concrete 1:2:4 (12.5mm graded aggregate) padding over roof complete all as specified and as directed.

M&L10 mm thick screed bed with CM 1:4 with water proofing compound @ 3% by weight of cement finish even and smooth surfaces using without extra cement. Water proofing compound shall be measured and paid seperately

M&L for providing APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) over on primed surfaced @ 0.3 Ltr/sqm by torched application and complete all as specified and as directed by Engr-in-charge (Note : Quoted rate shall deemed to be included for work in building / structure of any height)

M&L for complete removal of existing treatment of walls and applying two coats of oil emulsion distemper over a coat of primer, white or tinted, including preperation of surface with a wall care putty complete all as directed.

M&L for complete removal of existing treatment of Ceilings and applying two coats of white washover and , all as directed.

M&L Taking down cement or cement lime plaster of any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc and complete all as specified

M& L for 15 mm thick rendering on stone masonary in CM 1:4 on walls using integral water proofing compound @ 3% weight of cement , finished even and smooth without using extra cement and all as specified.(NOTE;- Water profing compound shall be measured and paid seperately)

M & L for preparing old surfaces plastered or unplastered surface of wall by complete removal of existing treatment by steel wire brushing /metal sheet including washing rubbing down and stopping of distempered and painted surface and applying two coat of exterior emulsion paint in different tint/shade (Comouflage pattern) as directed and approved by user over one coat of alkali resistant primer as per manufacture's instructions all as specified and directed.

M & L for preparing new surfaces plastered or unplastered surface of wall by complete removal of existing treatment by steel wire brushing /metal sheet including washing rubbing down and stopping of distempered and painted surface and applying two coat of exterior emulsion paint in different tint/shade (Comouflage pattern) as directed and approved by user over one coat of alkali resistant primer as per manufacture's instructions all as specified and directed.

supply only Integral waterproofing compound

Taking down copper/aluminium point wiring for (light, fan, bell, socket power socket etc )complete including fixture and fittings such as switches, sockets lamp holder bracket light fittings tube light fittings, regulators, ceiling rose , mirror light fitting , ceiling light fitting, fancy light fitting , fall ceiling light fitting bell/ buzzer and removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per condition separately) and making good disturbed surfaces of wall floor etc.

M&L Point wiring complete with 1.5 Sqmm single core multi standard copper conductor PVC FLRS insulated unsheathed cable in and incl PVC casing capping / PVC Conduit/PVC Conduit concealed (as per site requirment) with accessories existing pressed steel terminal boxes (sunk in wall) including new 3.00 mm thick plastic laminated sheet top cover with 1.50 Sqmm insulated unsheathed PVC covered copper conductor for common earth and connecting to earth dolly for:-(a) One light point controlled by one one way switch

(b) One fan point/Ex fan point controlled by one one way switch

(c) One socket out let 5 Amps on the same board

(d) One socket out 3 pin 5 Amps on the independent board.

All as per item above but with 2.5 Sq mm single core multi standard copper conductor cable for 6 pin 15 Amps socket out let on independent board.

S&F switch flush type 5 Amp, 240 V single pole one way ISI Marked.

S & F Socket outlet 3 pin, 6A, flush type complete.

S&F switch socket combination 2 in 1,5 Amps flush type

S&F switch socket combination outlet 6 pin ,6/16 Amps flush type

S&F ceiling rose, 3 Terminal Point/PVC/polycarbonate, isolated body.

Supply and fixing fan electronic regulator 300w step type all as specified and as directed by Engr-in-Charge.

M&L for sheet metal enclosures distribution board where MCB to be used with 200 Amps rated bus bar CL-IP-43 240 V, 8 way single pole & neutral link

M&L in replacement for MCB single pole 6-32 Amps, 240 V .

M&L in replacement for MCB single pole & neutral 40 to 63 Amps, 240 V .

Supply and fixing in replacement LED Tubelights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete

S&F sub main wiring with 2 run of 6 Sq mm single core copper conductor cable drawn through in rigid PVC conduit ISI marked with fitting and 6.0 Sq mm single core copper conductor cable for continues earth wire all as directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm 6.0mm thick, buried directly in ground (earth pith not less than 2.25 mtr deep below ground level) with top edge of plated not less than 1.5 mtr below normal ground level connected toincl galvanized iron or steel earth lead wire 4.0mm dia by mean of bolts nuts check nuts & washers of galvanized iron or steel pipe 15mm dia medium grade and connected to main switch board watering pipe shall be 20mm dia GI medium grade incl excavation earth work in any type of soil pit RCC cover complete.

Devi Engineeing