PROVN OF ALL WEATHER OUTDOOR PAINT, ADDN/ ALTN OF BOUNDARY WALL AND SPECIAL REPAIRS TO SMQs AT AF STN WADSAR

Amount

Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 25mm thick PCC (1:2:4) type B1 (using 20mm graded aggregate) as in levelling course.complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layer of morter for laying floor finishes CM (1:6) complete all as specified and as directed.

M&L for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for glazed ceramic coloured digital tiles 450mm x 350mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in CM (1:4) etc complete all as specified and as directed.

All as per Item No. 5 above but in skirting including backing coat in CM (1:4), 10 mm thick complete all as specified and as directed.

Demolition of brick wall and stone wall built in cement mortor including all quoins, archs, pillars etc complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

Taking down cement or cement lime plaster any description on brick or stone wall/ celling including raking out joint, hacking for key scrubing with water etc. complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:6) on fair faces of concrete or block masonary finished even and smooth (without using extra cement) in ineternal surfaces of wall complete all as specified and as directed.

All as per Item No. 10 above but 10mm thick in CM (1:6) and setting coat of 5mm thick CM (1:4) mixed with WPC in external surface of wall including scaffolding complete all as specified and as directed. Note:- WPC shall be measured and paid seperatly in relevants items of this schedule.

All as per Item No. 10 above but 5mm thick in ceiling surfaces in CM (1:3) complete all as specified and as directed.

M&L for preparation of new plaster surfaces of wall and applying two coat of distemper oil emulsion over a coat of primer over a sufficent coat of birla wall putty complete all as specified and as directed.

M&L for preparation of new surfaces of wall and applyong two coat of cement base paint complete all as specified and as directed.

M&L for preparation of new surface in ceiling and applying two coat of white wash complete all as specified and as directed.

Taking up or down 15mm dia steel tubing and connection including cleaning for refixing or removal to store complete all as specified and as directed.

All as per Item No. 16 above but 20mm dia complete all as specified and as directed.

S&F 15mm dia steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

All as per Item No. 18 above but 20mm dia complete all as specified and as directed.

S&F in repairs fancy type CP bib taps15 mm dia, chromium plated cast copper alloy with half turn type capstan heads, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs fancy type CP stop/ angular cock 15mm dia cast copper alloy, chromium plated fency type screwed down high pressure with half turn type capstan heads, screwed both end for iron pipe or for unions and fixed complete all as specified and as directed.

S&F 15mm dia pillar tapes fancy type of Chromoum Plated brass with half turn type capstan heads screwed down high pressure, with or without lettered hot and cold with long shank, screwed shanks and fly nuts, screwed for iron pipes or for WHB complete all as specified and directed

Dismantling of water tanks of capacity exc 250 ltrs and n exc 500 ltrs complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank of 500 ltrs capacity (cylindrical verftical with closed top) hoisted and fixed in position complete all as specified and directed.

Taking down chowkats or frame n. exc. 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and directed.

M&L aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92mm x 31.75mm x 1.50mm (section No 20831), bottom size 92mm x 31.75mm x 1.50mm (section No 20832) and shutter top & bottom of size 40mm x 18mm x 1.55mm (section No 20736) and sides (handle) of size 40mm x 18mm x 1.55mm (section No 20738) and lock side shutter frame of size 40mm x 18mm x 1.45mm (section No 20737)" with rubber gasket, beading and locking arrangement and rollers etc including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified and as directed by Engr-in-Charge.

S&F aluminium ventilator, louvers type, frame top & bottom of size 31mm x 42mm x 1.60mm (section No 20558) rectangular tub of size 40mm x 20mm x 2mm (section No 14019 and middle vertical of size 42mm x 46.20mm x 1.60mm section (20560) and clip for fixing wire mesh and glass of size 19mm x 17.30mm x 0.90mm (section No 19360) thick including stainless steel wire cloth 0.36mm nomonal dia of wire and 1.40mm average width of aperture and fixed with stainless steel wire staples and supply and fixing 5mm thick forsted/ pin headed glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc. complete all as specified and as directed by Engineer-in-Charge.

S&F aluminium powder coated (required colour to match window colour) grill of 5.00 mm dia squares rectangular triangular circular shape aperture n. exc. 5.00cm in length or width fixed with H or F channel complete all as specified and directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

S&F welded steel wire fabric supplied and fixed complete to steel members of weight not exceeding 4 kg per sqm complete all as specified and directed.

M&L preparation of new steel surface of any description 10cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and as directed.

S&F 125mm long heavy weight cold rolled mild steel hinges and fixed to frame with screwed or welding complete all as specified and as directed.

S&F 150mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of white wash complete all as specified.

M&L for complete removal of existing treatment from old wall surfaces and applying two coats of oil bound distemper over sufficient coat of birla wall putty complete all as specified and as directed.

M&L for complete removal of existing treatment from old wall surfaces and applying two coats of cement base paint complete all as specified and as directed.

M&L for preparation of existing treatment by scrappers or other means of wall surface and applying two coat of acrylic emulsion paint exterior grade over a coat of primer complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling plain or corrguted steel sheeting any guage thickness including Naital or similar pattern complete all as specified and as directed.

M&L for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

M&L for pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F in repairs 28mm dia stainless steel drapery rod with and including side ball finials, bracket/holders matching rings made from high grade ABS plastics complete all as specified and as directed.

S&F in repair vitreous china white wash down water closet pan (pedestal pattern) including fixing bolts, plastic seat cover with jet spray and including necessary flexible pipe connection and removing debris out side MD land complete all as specified and as directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level with inlet, ball valve, float and handle including brackets (The colour will also perfectly match with the EWC) complete all as specified and as directed.

S&F in repairs vitreous china white wash hand basin flat back of size 550mm x 400mm including PVC waste pipe, PVC 15 mm dia 450 mm long with PTMT nuts, connection pipe CP waste coupling including brackets cutting and pinning in ends of bracket complete all as specified and as directed.

Taking down shutter only of any description exc 1.0 Sqm n. exc 2.0 Sqm and removing complete all as specified and as directed.

M&L for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, kiln seasoned and chemically pressed treated complete all as specified and as directed by Engineer-in-Charge.

M&L preparation of new wooden surfaces of any description not other wise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed.

S&F in repairs wire guage shutter 30mm thick (Style)) consisting of frame made out of MS Tubes for top and bottom rail, MS frame shall covered with heat moulded PVC ‘C’ channel having a PVC sheet striped 20mm width strode inside with solvent cement rail and bottom rail on either side and as gap insert for top rail and bottom rail panting of predawn colored PVC sheets to be fitted in the MS frame welded/ secured to the stiles and rails feathered at edges with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at the site as per specification complete all as specified and as directed.

S&F in repairs aluminum alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of size 300mm complete all as specified and as directed.

S&F in repairs 100mm butt hinges, medium weight stainless steel ISI marked complete all as specified and as directed.

S&F in repairs aluminium anodised handle fabricated type of size 150mm complete all as specified and as directed.

S&F in repairs aluminium anodised barrel tower bolt of extruded section of size 150mm complete all as specified and as directed.

M&L for complete removal of existing treatment on surfaces of walls, chajjas etc by scrapping/ washing down with water and freeing the surfaces from all loose dirt, chalk, lime, grease, fungal, flakes etc filling up all cracks and make to the surface even and smooth and applying two coats of antifungal weather resistant acrylic paint over a coat of acrylic primer in approved shade/ clolour as per manufacturer’s instructions complete all as specified and directed including cleaning of floor, glass panes, switch boards door etc. complete all as specified and as directed.

M&L for rendering 15mm thick on brick or concrete surfaces in cement mortar (1:4) finished the surfaces even and fair without using extra cement complete all as specified and as directed.

M&L for preperation of newly plastered surfaces of wall and applying two coats of anti fungal weather resistant acrylic paint over a coat of acrylic primer in approved shade/ colour as per manufacturer’s instructions complete all as specified and directed including cleaning of floor, glass panes, switch board, door etc. complete all as specified and as directed.

M&L for preperation of newly plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

Taking out existing unserviceable plaster, loose unsound weaken cement concrete of any description and in any position from existing surface of RCC roof slab/ RCC facia/ beams/ columns/ RCC chajja, average depth 25mm (approximate 6.5 mtrs height from natural GL) with power driven pneumatic chiesel and removal of debries upto a distence 500 mtrs out side MD land including saw cutting of all edges, making square shoulders of cavaties and roughening of smooth surface, scraping out and removing corrosion and all loose scales, rust etc. from the visible reinforcement and cleaning the steel reinforecement properly providing NIT zink primer to form a contineous film and preparing the surface to receive concrete of epoxy grouting mortar etc. including providing necessary scaffolding complete all as specified and as directed.

M&L for applying bonding coat of modified styrene butadene emulsion in proportion 1 part (bonding agent) : 1 part (water) : 3 part (OP cement) by volume with the brushes etc. to bind new cement plaster/ polymer modified plaster/ concrete/ screed concrete with oldsurface including removal of loose/ distengrated old concrete/ plaster including preparation of surface etc. complete all as specified and as directed.

M&L for applying 25-35mm average thickness plaster on ceiling slab and chajja projections, facia and beams with polymer modified mortar firtified with SBR in proportion 1 part (cement) : 3 part (sand) by weight of cement with 11 to 15 ltrs water addition, finishing surface to match with existing adjoining surface complete all as specified and as directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Taking down galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining etc. (each line wire to be measured) complete all as specified and as directed.

Taking down old concertina coil of 1050 mm dia complete all as specified and as directed.

M&L for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. fair finished surfaces of concrete flat complete all as specified and as directed.

M&L for use and waste of formwork to sides of pillars, posts, struts, piers, columns, and stanchions rough finished surfaces of concrete circular on plan complete all as specified and as directed.

M&L for RCC M-25 (design mix) (using 20mm graded aggregate) in columns, pillars, piers, posts and struts etc complete all as specified and as directed.

M&L for RCC M-25 (design mix) (using 20mm graded aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding, welding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290-0 Gde E-165 complete all as specified and as directed.

S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

S&F steel galvanised punched type concertina coil 1050mm dia when stretched with 80 Nos of clip with weight 15.6 Kg/ coil and average coverage area is 6.00 RM per coil complete all as specified and as directed.

S&F mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other each screwed end to be fitted with washers and one hexagonal nut but length bolt one side embeded in concrete posts etc complete to fix fencing wire dia of shank 11 to 15mm, but length of bolt exc 10cm and n exc 15cm long complete all as specified and as directed.

M&L for preperation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and as directed.

ARTI CONSTRUCTION