REPAIR/MAINTENANCE TO EXISTING ROAD AND ROAD SIDE FURNITURE OF TECHNICAL AND RESIDENTIAL AREA OF IRDE UNDER GE(I) RND DEHRADUN

Amount

S&F in repair of traffic mirror/convex mirror size 800mm dia used for blind spots at internal lanes, parking and many more to get a superior view of surrounding area, impact resistance and distortion free, its quality glass, perfect finish, extensive area converage on the mirror and smooth surface, eco friendly, light weight and come with fixtures FRP is used in making brim and back holding plates, single piece poly carbonate used for greater damage resistance, incl cost of standard fixign, cost of labour and materials etc. complete as per company specification complete all as specified and directed.

S&F MS work as in joist, channel, angle sections etc. fixed independently without connecting plate cut to ordinary length confirm to Fe-410 (Gde E-250) complete all as specified and directed.

Excavation in hard/dense soil for post holes each not exc. 0.50 cum each and getting out returning filling in and ramming earth or broken rubbles in layers not exc. 25cm watering removing surplus soil to a distance 50m complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded aggregate in foundation filling and mass concrete complete all as specified and directed.

M&L repair to pot holes of any depth n. exc. 1 Sqm each including sweeping free from dust & mud or water scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25 mm in depth and making good by and applying evenly a priming tack coat with bituminous primer (Viscosity Grade Bitumen VG-30) @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder (Viscosity Grade Bitumen VG-30) 9.8 Kg/10 Sqm, blinded with 0.09 Cum of stone chipping, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chipping), depth of pot hole exc 30 mm complete all as specified and directed.

Preparing of black top surface by brushing with mechanical broomer for removing caked mud etc. and sweeping with mechanical broomer and finally with air compressore to remove all loose dirt etc complete all as specified and directed.

Applying evenly a priming/tack coat with paving bitumen VG-30 @ 05 kg per 10 Sqm over black top surface complete all as specified and directed.

Bituminous premix asphaltic semi dense concrete 40mm avg consolidated thickness using VG-30 with 5.5% binder content by weight of total mix, rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed. Note- The mixed materials for Premix Carpet shall be obtained from HOT MIX Plant and shall be laid with Mechanical Paver.

M&L for Preparation of new/old road surfaces and applying thermoplastic reflective paint in marking of minimum 1.5 mm thick single coat as in centre line and edge line, zebra crossing etc road marking of 150/100 mm width using ‘HOT MARK thermoplastic paint (Hot Application) by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter filler, thermoplastic requirement for glass beads shall be the table No 800.4 of MOST specification including spraying of glass beads etc all as per manufacture’s instructions complete all as specified and directed.

Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

M&L for preparing of new or previously untreated steel surfaces over 10cm width or girth and applying two coat of synthetic enamel paint on steel surfaces over red oxide primer complete all as specified and directed.

M/S VIJAY TRADERS (BID ID -3280715)

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS (BID ID -3280750)