Annual Plan 2024-25 Koduvally Municipality Project No 385/2024-25-Drinking water supply scheme at ERANHONA- Motor installation - Electrification-General Electrical Work

Amount

SITC pump set and Electrification

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.7:Supply and providing copper earth bus in the panel board

2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

OD237148/2024-2025:Supply and providing Danger 415 V, 150 X 100 mm Enameled danger plates

90.2.1.3:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control light point without ceiling rose - Short point

1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required.

OD237151/2024-2025:Supply and providing 2x25x3 mm G I strip as test joint on the existing watering pipe of earthing including bending and giving connections

OD237155/2024-2025:Providing and fixing 25mmx3mm GI Strip on surface or in recess for connections etc as required

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD237154/2024-2025:Supply and providing 25x6mm brass nut and bolt etc. as required.

OD237167/2024-2025: Supply and providing 2-32A offset staggered fuse link

OD237168/2024-2025:Supply and providing 32A HRC fuseholder with suitable nut,bolt etc.

OD237166/2024-2025:supply and providing 5/7W LED bulb on existing lamp holder

OD237157/2024-2025:Supply and fixing 63A Bakelite fuse holder with necessary bolt and nuts etc. as required

90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm

1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm

90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm

OD237150/2024-2025:Supply and fixing 50mm (2") GI flange in the existing suction/delivery pipe line using required leak proofing materials etc. as required

OD237158/2024-2025:Supply and fixing clamp made with 50x6mm MS Flat for hanging delivery pipe of submersible motor pump set in existing GI pipe above the open well

OD237160/2024-2025:Supply and fixing 50mm B class GI pipe as support for hanging submersible motor pump set in open well

OD237162/2024-2025:Supply and providing suitable stranded Steel rope for hanging the 10HP submersible motor pump set

OD237149/2024-2025:Supply and fixing 50mm 80 Sch ASTM Threaded Adaptor Male

OD237152/2024-2025:Supply and fixing 50mm 80Sch ASTM bend

OD237146/2024-2025:Supply, laying and fitting 50 mm 80 Sch ASTM pipe with suitable type solvent etc. as required at site,

OD237163/2024-2025:Supply and fixing 50mm ASTM socket 80 Sch

OD237156/2024-2025:Supply and fixing pump controller suitable for 3 Phase 10HP Open well submersible motor pump set complete with fully automatic star delta starter, single phasing preventer, ON & OFF indication lamps, push buttons, volt meter and ammeter etc. in sheet steel enclosure duly wired in the existing panel board and giving connection etc. as required. LT LK make MU-G10 H FASD or equivalent

OD237165/2024-2025:Supply ,installation ,testing and commissioning of 10 HP 8 stage submersible motor pump set (EKKI DECCAN 10 DGM/8 or equivalent) with MAX head 140 Mtr and discharge of 15000 LPH at 110 Mtr, 50mm out let using suitable type tools & plants including giving necessary connections etc. as required .

OD237161/2024-2025: Supply and fixing 50mm GM Non Return valve in the existing ASTM/GI pipe

90.14.24.19:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.4 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors.

JITHESH K (BID ID -1990072)

BHOOPESH T K (BID ID -1989439)

SASINDRAN E (BID ID -1989505)

Bidder Name

SHAJI C

BHOOPESH T K

SASINDRAN E

JITHESH K