Loading…
Loading…
Tender Value
₹1.6 Cr
EMD Value
₹3.3 L
Closing Date
19 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
WORKS
16 conditions · 5 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-I, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria (Applicable for Tender value more than 50 Lakhs): The tenderer must have successfully completed or substantially completed any of the following (by any Government organizations) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
(b)(i) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for (b)(i): Separate completed works of minimum required values shall also be considered for fulfilment of technical eligibility criteria for different components. (b) (ii) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. Any work or set of works shall be considered to be a separate component, only when cost of the component is more than 2 crore each. (b)(iii) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 2.3.3(a) (ii) of the Tender Document or through subcontractor fulfilling the requirements as per clause 2.3.3 of the Tender Document or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. Among the components of composite tender stipulated for evaluation of technical eligibility, tenderer can execute one or more specified components by engaging sub-contractor. The component(s) of work as stipulated in the tender document have to be mandatorily executed by the tenderer and others component(s) as stipulated in the tender document can be executed by the tenderer himself or by engaging sub-contractor. The components which are permitted to be executed by sub-contractor will be further classified in the tender document into those which will be considered towards technical eligibility and the remaining which will not be considered towards technical eligibility. For the component(s) which are to be mandatorily executed by the tenderer, the technical eligibility shall be assessed as per clause 2.3.2 (A) (v) (b) (i) of the tender document. In case of tenderer is JV, the Technical eligibility for the component proposed to be executed by the tenderer shall be fulfilled as per clause 2.3.2 (A) (xii) and Annexure-K. The technical eligibility for such stipulated components of work for which engagement of sub-contractor is permitted shall be evaluated as per clause 2.3.3 (a) (ii) of the tender document whether it is executed by tenderer or sub-contractor.
Note for Technical Eligibility Criteria: Work experience certificate from private individual shall not bec onsidered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turn over of Rs.500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits credentials issued by public listed company, the tenderer shall also submit alongwith the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid bycompany shall be enclosed in support of above. Completion Certificate/Experience Certificate issued by Competent Authority in favour of tenderer duly stating Name & Final cost of the Work, Date of Completion etc. as per Annexure -L must be uploaded along with the offer.
Similar Nature of Work (in case of Single similar nature of work): Design, Supply, Installation, Testing & Commissioning of HT/LT network like HT/LT Panel, Overhead distribution network, earthing, laying of HT/LT cable etc. and associated electrical works.
22 conditions · 14 needing a document upload
Check list of Mandatory documents to be uploaded by the tenderer(s) while submitting their offer. (SINGLE PACKET) as details of such items are given at page no. 4 of Tender document.
Requisite Bid Security, A . (ONLINE mode-CASH ) (No Documentary Proof required) B. ONLINE MODE-BG (BG Scanned copy to be uploaded with Tender Documents) Note for B :- The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids.
Upload your bank details i.e. Name of the Bank along with Bank Branch Code, Account Number, IFSC Code as per Form-14 (Real Time Gross Saving (RTGS)/ National Electronic Fund Transfer (NEFT) (Model Mandate Form)) of tender document.
Tenderers are required to fill up/upload requisite details in prescribed proforma of Annexure-L(COMPLETION CERTIFICATE) of tender document, without which the offer is liable to be rejected.
Tenderers are compulsorily required to upload undertaking as per Annexure-Q as stipulated in 2.2.12 of "Special Tender Conditions and instruction to tenderers". If annexure-Q is not submitted/uploaded at the time of tendering then the same shall be submitted after issue of LOA and before signing of the Contract Agreement.
The tenderers shall upload a certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed as M (A), as the case may be, non-submission of a certificate by the bidder shall result in summarily rejection of his/their bid and it shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self- attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document. It will not be obligatory on the part of Tender Committee to scrutinize beyond the submitted document of tenderer as far as his qualification for the tender is concerned, as stipulated in 2.2.6 of "Special tender Conditions and instructions to tenderers" without which the offer will be considered incomplete and will be rejected similarly.
Tenderer must compulsorily upload ANNEXURE-K-3 and ANNEXURE-K-4 If tender submitted on behalf of Partnership Firm, relevant Annexures K-3 and K-4 as Declaration to be submitted by the tenderer along with tender document.
Tenderer shall certify that they are not black listed or debarred by Railways or any other Ministry/ Department/PSU (Public Sector undertaking) of the Govt. of India/State Govt. from participation in tenders/contract on the date of opening of bids either in their individual capacity or as a member of the JV firm in which they were/are members.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
General Power Supply work for Electrification of Station Buildings, Service Buildings, Goods Shed, Circulating Area in c/w Provision of infrastructure facilities at new goods shed at Kaurha Station, Upgradation/Modernization of Infrastructure at Chandausi Goods Shed, Upgradation/Modernization of Infrastructure at Jwalapur Goods Shed, Upgradation/ Modernisation of infrastructure at Jangbahadur Ganj goods shed and any other site under the jurisdiction of Dy. Chief Electrical Engineer/Const./Moradabad
17-ELECT-C-T-GPS-MB-64
17-ELECT-C-T-GPS-MB-64
Open
Works - General
12 Months
Ambala, Haryana
₹0
₹3.3 L
19 May 2026
27 Apr 2026
5 May 2026
130 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 26,39,787.78 | ||
| — | — | — | 5,31,234.6 | ||
| Supply and recessing/fixing of M.S./PVC conduit pipe with accessories, junction box, etc including making chase, plastering/clamping etc as per technical specifications. PVC Conduit pipe conforming to IS 9537/Part III/1983 (Latest version) 25 mm (Medium) | — | 6500.00 | — | — | |
| — | — | — | 1,054.56 | ||
| Supply of Batten/Angle Holder/Ceiling rose & installation on the Junction Box of laid conduit including connections, Testing & commissioning as per Tech. Specification a) Bakelite batten/Angle Holder | — | 40.00 | — | — | |
| — | — | — | 8,700.12 | ||
| Supply of Batten/Angle Holder/Ceiling rose & installation on the Junction Box of laid conduit including connections, Testing & commissioning as per Tech. Specification b) Bakelite ceiling rose 3 plate | — | 300.00 | — | — | |
| — | — | — | 2,965.95 | ||
| Fabrication of weather proof distribution board as per drawing approved by Railway with 2mm thick CRCA sheet, duly painted, suitable for operation on single phase 230 Volts AC supply system complete with 6 No./4 No.-32 Amps. Porcelain Kit-kat Fuse, Neutral link, earthing, inter connections, supply, recessing, testing & commissioning as per tech. Specification Approx. size 400x250x135mm. b) Comprising with 4 nos. 32 Amps. Porcelain kit-kat fuse & neutral link. | — | 3.00 | — | — | |
| — | — | — | 2,32,794.12 | ||
| Earthing with 50mm dia GI pipe class 'B', 3 meter long earth electrode as per IS:3043 (Latest Version) to achieve earth resistances less than 5 ohms including construction of masonry enclosures with hinged cover plate of cast iron with locking arrangement (approx. size 400mmx400mm) on top, provision of earth plate, connections from earth electrode to switch gear/pole as per drawing | — | 100.00 | — | — | |
| — | — | — | 4,35,006 | ||
| Laying, underground/road/Railway track, recessing in platform /wall along with Rly. Track/in laid RCC/GI pipe as required 1.1 KV grade LT XLPE insulated armoured, aluminium conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks, provision of cable route marker as per Tech. Specfn. including end terminations with Alu. Crimping socket/lugs, testing and commissioning of following sizes :- Note: Cable will be supplied from the store of SSE/E/C/MB and SSE/E/C/UMB a) Up to 25 Sq. mm. | — | 5500.00 | — | — | |
| — | — | — | 12,25,926 | ||
| Laying, underground/road/Railway track, recessing in platform /wall along with Rly. Track/in laid RCC/GI pipe as required 1.1 KV grade LT XLPE insulated armoured, aluminium conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks, provision of cable route marker as per Tech. Specfn. including end terminations with Alu. Crimping socket/lugs, testing and commissioning of following sizes :- Note: Cable will be supplied from the store of SSE/E/C/MB and SSE/E/C/UMB b) Above 25 sq mm to 120 sq mm | — | 15000.00 | — | — | |
| — | — | — | 79,724.74 | ||
| Supply and laying of GI pipe class B ISI marked under road/clamping with erected pole or wall as per technical specifications given in explanatory notes and drawing as approved by Rlys for passing cable of following sizes: - i) 50 mm dia | — | 240.00 | — | — | |
| — | — | — | 92,063.09 | ||
| Supply and laying of GI pipe class B ISI marked under road/clamping with erected pole or wall as per technical specifications given in explanatory notes and drawing as approved by Rlys for passing cable of following sizes: - iii) 100 mm dia | — | 120.00 | — | — | |
| — | — | — | 30,318.6 | ||
| Supply and recessing/ fixing on surface 6 SWG, GI wire for loop earthing as required as per technical specification. | — | 2300.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
FinalT64forireps.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .