Constructing Library Building Extention (S.F) (Phase-III) ( Providing window grill, outer side RCC Pavement, Furniture, Colour work etc) (State Govt. New Construction Grant 2018-2019) (RE-INVITE)

NAME OF WORK :- CONSTRUCTING LIBRARY BUILDING EXTENTION (S.F) (PHASE-III) (PROVIDING

WINDOWS GRILL, OUTER SIDE RCC PAVEMENT, FURNITURE, COLOUR WORK) (STATE GOVT. NEW

CONSTRUCTION GRANT 2018-19) (RE-INVITE)

Number UNIT Rate AMOUNT

(upto 200 ITEM DESCRIPTION (upto 50 ( Upto 2 ( Upto

character characters) Decimals ) Decimals )

Dismantling tiled of stone floors laid in mortar

including stacking of serviceable materials and

disposal of unserviceable materials with all lead

Dismantling old plaster or skirting raking out

joints and cleaning the surface for plaster

including disposal of rubbish to the dumping

ground within 50 metres lead.

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- Coarse sand : 6- Graded brick bat

3 aggregate 40mm normal size) and curing 9.00 CUM 2995.63

complete excluding cost of formwork in (A)

Foundation and Plinth

Providing and laying controlled cement

concrete M.200 and curing complete Including

4 the cost of formwork and excluding 11.25 CUM 3874.28

reinforcement for reinforced concrete work in

road work concrete

Scraping plaster of any thickness and of any

mortar from wall and ceiling surface including

5 throwing away dismantle material with all lead 168.00 SQM 8.17

and lift including scaffolding for any working

CHINA MOSAIC: Providing and laying China

mosaic flooring for terrace using 12 mm to

mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be

6 tempered to bring mortar creme out up to 60.00 SQM 779.70

surface using white cement including rounding

off junctions and extending them up to 15 cm

along the wall, clearing with water and oxalic

acid etc. as directed.

STUDIO KEEN ARCHITECT, MEHSANA

Number UNIT Rate AMOUNT

(upto 200 ITEM DESCRIPTION (upto 50 ( Upto 2 ( Upto

character characters) Decimals ) Decimals )

WALL TILE:- Providing and laying 600 mm X

mm X 8 to 10mm thick ( or above size) first

quality vitrified tiles in dado of desired finish (

fully polished glossy, matt, satin, guard, anti

skid) in desired pattern in floor with residue

and skirting as per drawing / specification. The

tiles shall have minimum scratch hardness of

on Moh's scale with a density of 2.2 to 2.3 &

bonding strength of 250 kg/sqcm. The tiles shall

be set with good quality premixed tile adhesive

with wired finish screed & laid to proper

7 gradient. Finishing to be done with flush 168.00 sqm 1204.99

pointing in epoxy grout 2mm wide grooves &

matching approved pigment incl. curing,

polishing & cleaning with mild oxalic acid etc.

complete for all floors / all levels, as per

drawing / specification and or asper direction of

Engineer in charge for flooring, skirting or

channel work etc. complete The rate should be

inclusive of protection of flooring until the

handling of project by covering the joints with

aborts, plastic sheet & plaster of Paris. The rate

shall include cost of 25mm cement mortar,

VATA:- Providing cement vata (10cm. x 10 cm.

size) quarter round in cement mortar 1:1

including neat cement finishing, watering etc.

WATERPROOFING:- Providing and laying Dura

Membrane of 3mm Thickness with 100 Kg/m3

density minimum having tensile strength of

15Kg/cm2 (M.D.) and 15 Kg/cm2 (T.D.) and

tensile elongation of 140% (M.D.) & 120%(T.D.)

and water vapour transmission rate should not

9 exceed 0.05 g/m2 mm of Hg Hour (make 20.00 SQM 2110.90

supreme) it should be achieved by overlapping

a minimum 2inches (50mm) and firmly sealing

the joint with heavy duty Hot Air Gun. And top

finish with Concrete Screed as Required and as

directed by the Engineer In charge.( SUPREME

STUDIO KEEN ARCHITECT, MEHSANA

Number UNIT Rate AMOUNT

(upto 200 ITEM DESCRIPTION (upto 50 ( Upto 2 ( Upto

character characters) Decimals ) Decimals )

CRACK FILLING: Providing and applying the

elastomeric joint sealant two component, high

performance polysulfide formulation

conforming to BS:4254 and ASTM C 920 having

weathering resistance to ultra-violet rays and

10 shall exhibit shore A hardness of 25 and have 420.00 RMT 178.70

movement accommodation factor 25%

including using of compatible primer of

approved standard etc. complete. for 12 mm or

required thick joint as directed and approved

by architect or engineer.

TEXTURE- providing and applying GRANUAL

texture on walls up to required height above

ground level consisting of two different shades

selected by the architect ,using tools etc. apply

after 28 days of brick work and ,The surface to

be plastered should be clean, dry, and free

from any loose material or debris. walls need to

be primed or sealed, plaster mixture is

prepared according to the manufacturer's

instructions (make- Asian Paints)

Providing and fixing hard drawn steel wire

fabric 75mm x 25mm mesh or weight not less

12 than 7.75 kg. per Sq.. to 50x50x 6mm m.s. 35.20 SQM 777.77

angle frame etc. including 60 x 20mm beading

Providing and fixing M.S. grills of required

pattern to wooden frames of windows etc. with

M.S. flats at required spacing's and frame

alround, square or round bars with round

headed bolts and nuts or by screws (A) Plain

STUDIO KEEN ARCHITECT, MEHSANA

Number UNIT Rate AMOUNT

(upto 200 ITEM DESCRIPTION (upto 50 ( Upto 2 ( Upto

character characters) Decimals ) Decimals )

STEEL PRIMER: Applying priming coat over new

/old/ any steel and other metal surface after

and including preparing the surface by

14 thoroughly cleaning, oil, grease, dirt and other 28.80 SQM 38.15

foreign matter and scoured with brushes fine

steel wood, scrapers and sand paper with ready

mixed priming paint brushing red lead.

STEEL PAINT: Painting two coats (excluding

priming coat) on new/old/any steel and other

metal surface with enamel paint, brushing,

interior to give an even shade including

cleaning the surface an even shade including

VISITOR CHAIR:- providing and placing

modular armless non revolving chair Chair

frame with backrest Frame: Steel,

Epoxy/polyester powder coating Back:

Reinforced polypropylene plastic Seat cover:

Polypropylene plastic Seat: Coated fabric: 75%

polyester, 25% cotton, 100% polyurethane Seat

frame: Layer-glued wood veneer Seat foam:

Polyurethane foam 35 kg/cu.m. size - Width:

45 cm (17 3/4 ") Depth: 51 cm (20 1/8 ") Height:

Seat depth: 44 cm (17 3/8 ") Seat height: 46 cm

(18 1/8 ") Max. load: 110 kg (243 lb) (MAKE-

WOOD360 LLP/ shreenathji)

BOOK SUPPORTER : providing book supporter

17 made from S.S 4mm plate (304 grade) polished 1000.00 NOS 1121.89

finish of size 200mmx 150mm height 120mm

Providing and fixing anti corrosive type plain

POLY CARBONATE Transparent wall panel 6 mm

thick panelling on terrace window to prevent

18 water from entering into building . Sheet shall 12.00 SQM 3978.05

be directly screwed to existing window grill of

frame sealing gaps with silicone sealant and

make it waterproof complete.

STUDIO KEEN ARCHITECT, MEHSANA

Number UNIT Rate AMOUNT

(upto 200 ITEM DESCRIPTION (upto 50 ( Upto 2 ( Upto

character characters) Decimals ) Decimals )

METAL TIJORI: providing and Supply of free

standing metal cabinet of size 1000X550X1980

mm High Precision Dimple Key Lock - Material:

Metal - Colour: TA Grey (Spray Paint Finish)

kg weight with four no of shelves, drawers

with front open two doors as per selection by

the architect & can be customized as per

requirements of architect. (MAKE-godrej)

Note : GST Shall be paid Extra on the Submitted Rate

STUDIO KEEN ARCHITECT, MEHSANA