REPAIRS TO ROOFING, VALLEY GUTTERS, PLASTERING, FLOORING AND ROOF TREATMENT TO CERTAIN BLDGS AND SWT TO DEPOT AREA OF COD UNDER AGE B/R (EAST) AT GE DEHU ROAD.

Amount

Dismantling plain or corrugated steel sheeting of any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling asbestos cement (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed.

Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc complete all as directed.

Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar (like for interlocking tile , kota stone, cuddapa stone and marbles) complete all as directed.

Demolition of wall/ ceiling boards (fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snap grid complete all as directed.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for and removing debris outside MD land all as specified

Dismantling structural steel work from and including doors, gates or of any description but excluding framed truss etc complete all as specified. Note :- dismantling of plain/corrugated sheets from doors and gate will be measured separately in particular item of sheet dismantling.

M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified

M & L for 75mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in sub base for hard standing complete all as specified and directed.

M&L 100 mm thick P.C.C 1:4:8 type D-2 using 40 mm graded aggregate in sub base complete all as directed.

M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete all as specified and as directed.

M&L for laying machine pressed precast concrete interlocking reflective coloured (Glozy Finish)pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming laid over 100mm thk Granular Subbase Shingle/gravel , spread, rolled and consolidated to gradient and camber required all as specified.

M & L for Chequered cement concrete (Glozy Finish) tiles 30cm x 30cm x 25mm thick jointed with grey pigment cements/pigments and pointed in neat cement slurry in floors 15mm thk cement screed base laid in mortar 1:4 including pointing in white cement (1:2) all as specified and as directed.

M & L for 50 mm thick PCC type C2 1:2:4 (20mm graded aggregate) in flooring complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:6, complete all as specified

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:4 with wpc, complete all as specified

M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.

M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete.

S & F 0.5 mm thick pre painted/coloured galvalume Al zin coating GI based corrugated steel sheet of an colour having tensile strenth of 550 Mpa as in roofing fixing all as per manufactures instructions fixed on roof with all fittings and accessories.

Ditto as per item above but plain sheet as in ridge, etc

S & F Machine pressed 1.00 mm thick plain, galvanise, mild steel sheeting in valley gutters (Trapezoidal shape), drips and straight clashings (length and girth fixed) with grade of zinc coating 275.

S & F for 2 mm thick fibre glass reinforced transulant corrugated sheeting with two corrugations side laps fixed with coach screw and washer in roof , wall etc.

S & F for 1.25 mm thick Steel rolling shutters, mechanical gear operated with bevel gear box and crank handle,as specified including top covers, anchoring rod, hasp, staple,safety lockers and one shop coat of primer, erected in position as directed by Engineer-in-charge.

M & L for hot rolled mild steel in roof trusses (framed ) trussed , purlins, crane gantries , rails and fastenings and heavy bracket framing ( beam, tee, angle, channel or flat sections etc) including distance pieces, cleats etc. of Fe 410-W (Gde-E-250) quality-A complete

M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410 Gde E-250

S&F Steel work tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

M & L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’

M & L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound

M & L for Mild steel, plain, black sheet (1.0mm thick) 16gauge in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

M & L for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper in approved colour/ shade over a coat of chalk whiting primercomplete all as specified and as directed.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L for PCC type B1 (1:2:4, using 20mm graded stone aggregate) as in coping.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.

S & F Anodised Alu. Snap grid 605x605 mm frame work for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 6 mm dia G.I. wire ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long complete all as specified and as directed.

Taking down existing treatment of any description and any layer from roof including scraping and roughening old by picking, sweeping clean and washing down to remove dust etc.complete and applying/brushing the cleaned surface with neat cement slurry 3 Kg per Sqm complete.

M&L for rendering 15 mm thick on old fair faces of brick work or concrete surfaces finished even and smooth in cement mortar (1:4) complete all as specified and as directed.

Supply only integral water proofing compound.

M&L for water proofing treatment using polymerised membrane to roof slab. Water proofing treatment shall be as under :- (a) The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned to remove all foreign materials & dust to receive primer. (b) On the dried roof surface, apply one coat of bituminous primer @ 100 Gm/ Sqm as per manufacturers instruction. (c) On this primed surface, the approved APP modified bituminous membrane with non woven polyester mat asreinforcement weighing not less than 3.5 Kg/ Sqm laid by torch application metho and top surface shall be applied with bituminous aluminium paint. (d) The overlap while torching shall be 75mm on longitudinal direction & 100mm on transverse direction.

M & L for Plain cement concrete 1:2:4, type B1, using 20 mm graded stone aggregates as in levelling course/ padding concrete on roof all as specified and directed.

Dismantling floor, hearth or wall tiling marble etc including cement mortar bedding,and not backing including removing serviceable tiles to stores and rubbish off the premises. complete all as specified and as directed.

M&L for joint free non-skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exc 0.11sqm but n.exc 0.18 sqm, of approved colour in floors, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colour. over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

All as per item above but on skirtings with & including 7 to 8 mm thick backing Coat in CM (1:4) complete all as specified and as directed.

Material and labour for double charge dark shade vitrified tiles 7-8mm thick (square/rectangular) polished, area of each tile exc. 0.18 Sqm but not exc. 0.36 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Ditto above item above but on skirting over 8 to 10 mm th rendering in CM 1:4 complete all as specified and directed.

M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 8 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement with & including backing coat 10mm thick in CM 1:4 complete all as specified and directed.

S&F in repairs including disconnecting tanks ,1000 Ltrs Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F in repairs including disconnecting tanks ,S&F 500 Ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S & F powder coated aluminum frame for doors, windows & ventilators with one or more rebate inlcuding jointing cleats and alike for fixing complete all as specified and as directed.

Supply and fixing three track sliding window including frame with two shutters with 4mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc; fabricated using following aluminium anodised sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engineer-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. (Note:- Cost of Tinted glass & wire cloth shall be included in the quoted rate of the item).

S & F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws including 4 mm thick glass (ordinary quality) etc. complete all as specified

Supply and fix for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc including taking out old frame shutter complete all as specified and directed.

Taking up or down 15mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and as directed.

S&F 15mm bore Galvanised mild Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

Fixing only 15mm bore Steel water tubing with provn of all new fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed. NOTE: Old serviceable steel tubing retrieved from taking down under item no 53 shall be used. complete all as specified and as directed.

S&F in repairs glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S&F in repair of sheet glass 3 mm thick ordinary glass with oil putty in square n.exc 0.5 sq.m in each pane.complete all as specified and as directed.

S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed.

S&F in repair Vitreous china wash basin white flat back size 580 x 450mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand alongwith 32mm dia CP waste coupling and PVC waste pipe in repairs complete all as directed.

S&F in repair pillar taps fancy type cast copper alloy, half threaded with heads, chromium plated, screwed down high pressure , with or without lettered HOT or Cold with long screwed shanks and fly nuts , srewed for iron pipe and fixed 15 mm dia of pipe all as specified.

Taking down Chowkat or frame n.exc 1.5 sq.m including removing to store,complete all as specified and as directed.

Taking down Chowkat or frame exc 1.5 sq.m & n.exc 4 sq.m including removing to store,complete all as specified and as directed.

Taking down Shutters of any description exc 1 Sqm and n exc 2 sq. m each and removing to store complete all as specified and as directed.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm.complete all as specified and as directed.

S&F Glazed and skeleton shutter 35 mm thick 1st class soft wood, divided into square, with plain chamfered or round mitred and rebated sash bar, any numbers prepared to receive glass, gauge etc edges of framing plain or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chowkat ,complete all as specified and as directed.

S&F 30 mm thick plain framed paneled shutter with locking rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneered on both face. The size of rail and style as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated 2nd class hard wood,complete all as specified and as directed.

S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.complete all as specified and as directed.

S & F Butt hinges 100 mm size medium weight cold rolled mild steel and fixed, complete all as specified and as directed.

S & F Extruded Aluminium alloy handles, fabricated type, anodised 125 mm size, complete complete all as specified and as directed.

S & F 125 mm mild steel tower bolt, ISI marks, stone enameled black with bright bolt and fixed, complete all as specified and as directed.

S & F 250 mm aluminum anodized sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified and as directed.

Supply and fixing in repair for vitreous china european dual type one piece type water closet with flushing cistern of size 780x375x700mm white with and including fittings such as s' trap distance pieces 100 mm long etc complete all as specified and as directed.

M&L, applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces of any description over 10cm width or girth not otherwise described complete all as specified and as directed.

M/S B.A. GAIKWAD

H S TAKHI

Star Construction

Crown Chemicals

DR J S CHADHA AND SONS

Santhi Enterprises

RAMESH PATIL