Construction of Community Hall at Meghapar(Za.) Village Tal. Tankara Dist. Morbi (Under MP Grant Yr-2025-26)

Name of Work :-Construction of Community Hall at Meghapar(Za.) Village Tal. Tankara Dist. Morbi (Under MP

Grant Yr-2025-26)

Bill of Quantities

Memorandum showing items of works to be carried out

Item Discription of Item (With Brief Specification and reference to Quantity Unit Rate In Amount

No. book of Specification) Figures

In Figure Rs. Ps

1 Excavation for foundation upto 1.50 M.depth including sorting out 19.30 Cum 212.52

&stacking of useful materials i.e. dispositing the excavated stuff up

to all lead & lift (a)Loose or soft soil.

2 Excavation for foundation upto 1.50 M.depth including sorting out 19.80 Cum 272.57

&stacking of useful materials i.e. dispositing the excavated stuff up

to all lead & lift (a)Dense or Hard soil.

3 Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse 8.00 Cum 2927.46

sand : 8- machine crushed stone aggregates 40 mm nominal size)

and curing complete excluding cost of formwork in (A) Foundation

4 Providing and laying ordinary cement concrete1:1.5:3 (1cement,1.5 5.70 Cum 5450.80

sand, 3 gradedstone aggregates 20 mm.Nominal size) and

finishing smooth with curing etc. complete excluding cost of form

work and reinforcement for reinforced cement concrete work in in A)

Foundations, footings, base of columns and mass concrete

5 Providing and laying ordinary cement concrete1:1.5:3 5.70 Cum 10914.49

(1cement,1.5sand, 3 gradedstone aggregates 20 mm.Nominal

size) and finishing smooth with curing etc. complete including the

cost of formwork but excluding the cost of reinforcement of R.C.C.

work in Column (iii) Having cross-sectional area more than

Sq.M. and up to 0.18Sq.M.

6 Brickwork using common burnt clay building brick shaving crushing 22.40 Cum 4214.33

strength not less than 35 Kg/Sqcm. in foundation and plinth in

cement mortar 1:6(1 Cement ; 6 Fine sand) Conventional bricks

7 Filling available excavated earth (excluding rock) in 38.30 Cum 136.92

trenches. plinth, sides of foundations etc. in layers not exceeding

20 cm. in depth consolidating each disposited layer by

ramming and watering.

8 Brickwork using common burnt clay building brick shaving crushing 17.10 Cum 4496.05

strength not less than 35 Kg/Sqcm. in super structure Upto All floor

level in cement mortar 1:6(1 Cement ; 6 Fine sand)

9 Providing and laying cement concrete1:1.5:3 (1cement,1.5sand, 3 0.30 Cum 7186.77

gradedstone aggregates20 mm.Nominal size) and curing complete,

including cost of formwork in sill and sides (R.C.C. band) but

excluding the cost of reinforcement upto All floor level

10 Providing & laying ordinary C.C. 1:1 1/2:3 ( 1 cement ,1 1/2 course 1.40 Cum 10649.62

sand, 3 graded stone agg. of 20 mm nominal size )and for R.C.C.

LINTELS incl. Finishing smooth with curring of formwork but excl.

the cost of reinforcement.for above floor upto All Floor level.

11 Providing & laying cement concrete 1:11/2:3 (1 cement ,11/2 0.90 Cum 7042.78

course sand,3graded stone agg.of 20 mm nominal size) for rein-

forcement concrete CHHAJJAS not exceeding 10cm. thickness upto

floor two level incl. finishing the exposed surface with C.M. 1:3 (1

cement ,3 fine sand) to give a smooth and ever surface, centering,

formwork and curring comp.Excl. the cost of reinforcement.above

plinth Upto All floor level.

12 Providing & laying C.C. 1:11/2:3 (1 cement ,11/2 course sand,3 20.00 Cum 8035.64

graded stone agg.of 20 mm nominal size) and finishing smooth with

curring etc. comp. incl. the cost of formwork but excl. the cost of

reinforcement for R.C.C. work in. (A) Beam :- Having cross

sectional Area 0.085 to 0.12 Sqm.upto All floor level

13 Providing & laying ordinary cement concrete1:11/2:3 (1 cement 6.60 Cum 7258.19

,11/2 course sand,3 graded stone agg.of 20 mm nominal size)

exposed work with curring etc.comp. incl. the cost of formwork but

excluding the cost of reinforce ment for R.C.C. work in. SLAB :-

having more then 10cm. and end upto 13cm. thickness.upto All floor

14 Providing TMT Bar FE 500/500D reinforcement for R.C.C. work 4720.00 Kg 77.29

including bending, binding and placing in position complete upto All

15 Providing fixing of Polished Kotah stone frame for windows of 15.80 Sqm 2739.03

15cmx4cm. Size including ordinary grill fitting,painting the grill,

necessary holdfasts, holes for fixtures and fastenings incl. all labour

& materials etc. comp

16 Providing fixing of Polished Kotah stone frame for Doors & wIndows 8.40 Sqm 1152.53

of 15cmx4 cm. Size including necessary holdfasts, holes for fixtures

and fastenings incl. all labour & materials etc.

17 Providing and fixing 35mm. Thick Panelled,glazed orPanelled and 23.95 Sqm 3928.44

glazed shutters for doors,windows andclearstory windows including

anodised alluminiumbutt hinges with necessary screws and Indian

TeakWood shutters with-(B) Partical board panells.12mm. thick

including applying primer and two coats of oil painting etc. complete

18 Providing 15mmthick cement plaster in single coat on fair side of 150.20 Sqm 180.40

Brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (I)cement mortar 1:3 (1 cement:3 sand)

.Upto floor All level

19 Providing 10 mmthick cement plaster in single coat on fair side of 166.70 Sqm 186.10

Brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (I)cement mortar 1:3 (1 cement:3 sand)

.Upto floor two level finished even & Smooth with floating coat of

neat cement slurry.

20 Providing and laying 24" x 24" vitrified 8mm thick tile flooring over 54.50 Sqm 1476.54

20MM (average) base of cement mortar 1:6 (1- Cement : 6-Coarse

Sand) on new surface or fixing on existing flooring by adhe-sive

material including dismentalling of existing flooring and jointed with

colour cement slurry including finished with flush pointing and

cleaning the surface etc. complete. For Light shade

21 Finishing wall with weather proof exterior emulsion paint on wall 150.20 Sqm 120.26

surface(two coats) to give an required shape even shade after

thoroughly brushing the surface to rempve all dirt, and remains of

loose powdered materials etc complete.

22 Distempering (Two coats) with oil bound distemper of approved 167.00 Sqm 117.27

brand and manufacture and of required shade on wall surface to

give an even shade over and including a priming coat with

distemper primer of approved brand and manufacture after

thoroughly brushing the surface free from mortar dropping and other

foreign matter and also including preparing the surface even and

papered smooth including Applying two coats of Birla or Asian

acrylic lappy (purty) and two coats of primer of approved brand and

manufacture on new wall surface to give an even shade.

23 Providing, laying and jointing in true line and level 110 diametre 6.60 Rm 876.90

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 110 mm diametre x

mm length x 145 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all materials.

24 Providing,Laying and fixing Balcony Concrete Baluster including 76.00 No 80.80

Labour,Transportation,Colour,RCC Work,TMT Etc..Complete,As

Per Engineer In Charge

25 Providing & Fixing Acrylic sheet name board size 1.00 mt x 0.60 1.00 No 1515.00

sqm. With painting letters Indicating Gram panchayat office /

Village/ Taluka/ Dist. Etc. as directed by Adm. Department etc. with

all required material & Labour comp.

26 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 12.00 Point 449.45

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose

/ H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat- II

27 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 6.00 Point 629.23

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth

continuity of following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling completeCat- II

28 Point wiring for on board Looped Plug with 6A Modular type switch 2.00 Point 241.39

& 5 pin socket erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling with following type

accessories Cat- II

29 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm 3.00 Point 473.69

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete - Cat_II

30 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 8.00 No 373.70

Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V

to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Tube Light with integral driver (iii)

18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet ( R.& B. Ele.

Dn. SOR item No.2-15-1 (III) )

31 Providing & erecting 240 V MCB double pole switch for lighting load 1.00 No 295.93

(B Curve) having 10 KA breaking capacity & Confirming to IS :8828

in Existing box , having capacity

(B) 40 Amp.- Cat-III

32 Providing and erecting Sheet Steel powder coated MCB distribution 1.00 No 1492.78

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without

MCB to house appropriate nos. of MCBs.(The DBs should be used

of same company of MCB to be used)

(A) Single phase 12 way SS double door

33 Pipe type earthing having 150 cms.long and 2.5 cms. dia. 1.00 No 540.35

galvanised iron pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG earth wire. For

using salt and charcoal / coke as required for pipe type earthing.

34 Providing & erecting Approved make Ceiling Fan with double ball 6.00 No 1596.81

bearing ISI mark with Condenser 230 volt A.C. 50 c/s, 1200 mm

sweep complete having 3blades with aluminium blades with

canopy & 30 cms. down rod erected on existing hook or Clamp with

24/ 0.2, 3 core flexible wire with earthing.

Dismentled Material Credit Rs. 0 will be deducted from 1 St

Rupees Twelve Lakh Sixty Two Thousand Two Hundred Fifty Four and Paise Fifty Six only

I \ We am \ are willing to carry out the work at ……………………… % above\bellow percent ( Should be written in figures

and words ) of the estimated rate mentioned above. Amount of My \ Our tender works put as under.

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for

which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in

all the tender.

Signature of Contractor

Deputy Executive Engineer Executive Engineer

Panchayat R.& B. Sub Division Panchayat R.& B. Division