REPAIR/REPLACEMENT TO SECURITY/STREET LIGHT, LT OH LINE AND LT PANEL WITH CONNECTED WORKS AT AF STN UNDER GE MISAMARI

Amount

Excavation in trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable/Pole/Stays etc getting out in Soft/Loose Soil, complete all as specified and as directed.

Excavating in trenches, not exc. 1.50 Metre wide and exc. 1.50 Metre but not exc. 3.00 Metre in depth, for Foundation of Poles/ Stays, etc. and getting out in Soft/ Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Leveling, Watering and Well Ramming in layers not exc. 25 Cm thick in Soils, complete all as specified and as directed.

Removing Surplus Soil to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed.

M & L Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 18 cm thickness, complete all as specified and as directed. Note : For the purpose of Payment, 18 cm Punned thickness of Sand Cushioning only shall be measured and paid for.

S & F Sub-Class ‘B’ Brick, well burnt, laid breadthwise along the length of Cable laid in trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed.

Dismantling unserviceable LT Poles of any description and any size including demolition of Cement Concrete (as/if required) and made good disturbed Ground complete all as specified and as directed. Note : Unsv Poles will be dismantled at Ground Level and disturbed ground will made good as directed for which Earthwork, demolition of Cement Concrete, etc. will not be measured and paid separately.

Dismantling Cross-Arms of Mild Steel Channel or Angle Sections, etc, including Mild Steel Bolts, Nuts, Washers, etc., complete all as specified and as directed.

Dismantling Insulators like Pin type, Shackle type from existing Electric Poles of any description and any size, seggregating Seviceable Insulators and keep in safe custody for re-use, complete all as specified and as directed.

Dismantling ACSR or AAC Conductors from the Disturbed Span including Line Spacer, etc., complete all as specified and as directed.

Dismantling Earth Wire, Cradle Guarding etc, complete all as specified and as directed.

Taking down/out unserviceable UG Cables of any Cross Sectional Area and Connections and joints including Pipes, Bricks, etc of any description laying in trenches or fixing with Walls/Poles, segreating serviceable Pipes, Cables etc and keep in safe custody for reuse, complete all as specified and as directed. Note : Earthwork will be measured and paid under appropriate Items.

M&L PCC 1:3:6 type C2 using 40mm graded stone aggregate for stay assembly complete all as directed

M&L Cement Concrete 1:3:6 type C-2 (40mm graded aggregate) as in Foundation of Poles, Stays, etc. including Formwork (as/if required) complete all as specified and as directed.

M&L Cement Concrete 1:2:4 type B-1 (20mm graded aggregate) as in Coping of Poles, etc. and finishing the Concrete surfaces Fair and Even including necessary Formwork required at Site(s), complete all as specified and as directed.

Supply & Erecting Steel Tubular Swaged Pole Type 410-SP-31 (9.0 Metre long) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws including applying two coats of Black Bituminous Paint Internally and Externally from bottom End of Pole upto PCC Coping and applying with two coats of Aluminium Painting over a coat of Red oxide Primer (Externally from Top of Coping) including writing MES Pole No. with synthetic Enamel Paint (First Grade/quality), complete all as specified and as directed. Note : Earthwork, Cement Concrete, etc. will be measured and paid under approprite Items.

M & L Stay Assembly complete with Accessories as show in Electrical Plate No. 1 of MES Schedule Part-I, diameter of Stay Rod 16mm, size of Plate 230 x 230 x 6 mm complete all as specified and as directed. Note : Earthwork, Cement Concrete, Mild Steel Stay Clamps with Bolts, Nuts, Stay Strand, Loop Insulator etc. will be measured and paid under approprite Items.

Dismantling unserviceable stay assembly of LT Pole complete all as specified and as directed. Note : Unsv Stay assembly will be dismantled at Ground Level and disturbed ground will made good as directed for which Earthwork, demolition of Cement Concrete, etc. will not be measured and paid separately.

M&L Cross-arms, Bracings, Supports, Clamps and Back Plates fabricated from Structural Steel Sections including Nuts, Bolts, Washer, welding, bending cold or hot, drilling holes for Bolts, in any shape or size as indicated/ directed and inclusive of one coat of Aluminium Primer one Under Coat and One Finishing Coat of Aluminium Paint, complete all as specified and as directed.

Refixing only Cross-arms, Bracings, Supports, Clamps and Back Plates (serviceable materials i.e. Structural Steel Sections obtained from Item No. 8 here-in-before) including Nuts, Bolts, Washer, welding, bending cold or hot, drilling holes for Bolts, in any shape or size as indicated/ directed and inclusive of one coat of Aluminium Primer one Under Coat and One Finishing Coat of Aluminium Paint, complete all as specified and as directed.

S&F Insulator Pin type Porcelain, Vitreous, White, Brown or Green including one Galvanised Mild Steel Spindle, Two Galvanised Iron Washers and One Galvanised Iron Nut, 100mm Height, 65mm dia for 1100 Volt grade complete all as specified and as directed.

Fixing only Insulator Pin type Porcelain, Vitreous including one Galvanised Mild Steel Spindle Two Galvanised Iron Washers and One Galvanised Iron Nut, 100mm Height, 65mm dia for 1100 Volt grade (Serviceable Insulator obtained from Item No. 9 here-in- before) complete all as specified and as directed.

S & F Shackle type, Porcelain, Vitreous, White or Brown Insulator of size 100mm height 115mm dia including Galvanised Mild Steel 31x5mm Strap, 14mm dia Insulator Bolts, Nuts, Washers, etc. for Working Pressure 1100 Volt, complete all as specified and as directed.

Fixing only Shackle type Porcelain, Vitreous of size 100mm height 115mm dia including Galvanised Mild Steel 31x5mm Strap, 14mm dia Insulator Bolts, Nuts, Washers, etc. for Working Pressure 1100 Volt grade (Serviceable Insulator obtained from Item No. 9 here-in-before), complete all as specified and as directed.

S & F Loop Type Insulator Vitreous White, Brown or Green, large size with overall dimensions 90x65mm, clearance of hole 16mm dia, complete all as specified and as directed.

S & F Aluminium Conductor Steel Reinforced (ACSR) (sizes as ordered) with permissible Sags and providing Jumper, etc., fixing on Electric Poles and binding to Insulators with Aluminium Binding Wire as in OH Conductors including stringing, tightening, etc., complete all as specified and as directed. Note : Cost of Binding Wire is deemed to be included in the quoted Unit Rate.

Labour for Releasing ACSR Conductor of existing OH Lines by un-binding from Insulator of any description, re-fixing after stretching, re-stringing the Conductor, removing excess Sag, maintaining proper distance between Conductors as ordered, and binding to insulators with Aluminium Binding Wire complete all as specified and as directed. Note : Cost of Binding Wire is deemed to be included in the Quoted Unit Rate.

S & F Galvanised Steel Wire 3.15 or 4.0mm dia as Earth Continuity Conductor and fixed to Pole, binding with Aluminium Binding Wire, complete all as specified and as directed. Note : Cost of Binding Wire will deem to be included in the Quoted Unit Rate.

Labour for Releasing GI Wire of existing OH Lines by un-binding from Insulator of any description, re-fixing after stretching, re-stringing GI Wire, removing excess Sag, maintaining proper distance between Conductors as ordered, and binding to insulators with Aluminium Binding Wire complete all as specified and as directed. Note : Cost of Binding Wire is deemed to be included in the Quoted Unit Rate.

S & F PVC/ Fibre Separator for LT Lines 1100 Volts OH Conductor 2 Wire system for horizontal spacing of Conductor, fixing with Nuts, Bolts, Washers, etc , complete all as specified and as directed.

S & F PVC/ Fibre Separator for LT Lines 1100 Volts OH Conductor 4 Wire system for horizontal spacing of Conductor, fixing with Nuts, Bolts, Washers, etc., complete all as specified and as directed.

Supply & laying incl replacement of LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, cross-sectional area 400 Sqmm 3.5 Core, laid in trenches/surface of Wall/in GI Pipe along with Pole for connec-tion to OH Lines including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. and Testing, complete all as specified and as directed. NOTE : Earthwork, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items.

-Ditto- All as per Item No.32 here-in-above, but 95 Sqmm x 3.5 Core, Complete all as specified and as directed.

-Ditto- All as per Item No.32 here-in-above, but 70 Sqmm x 3.5 Core, Complete all as specified and as directed.

-Ditto- All as per Item No.32 here-in-above, but 50 Sqmm x 3.5 Core, Complete all as specified and as directed.

-Ditto- All as per Item No.32 here-in-above, but 35 Sqmm x 3.5 Core, Complete all as specified and as directed.

-Ditto- All as per Item No.32 here-in-above, but 25 Sqmm x 3.5 Core, Complete all as specified and as directed.

-Ditto- All as per Item No.32 here-in-above, but 16 Sqmm x 2 Core, Complete all as specified and as directed.

Supply & lay GI tubing light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc of size 50 mm dia bore complete all as specified and directed .

-Ditto- All as per Item No.39 here-in-above, but GI Pipe of Size 40 mm dia, Complete all as specified and as directed.

-Ditto- All as per Item No.39 here-in-above, but GI Pipe of Size 80 mm dia, Complete all as specified and as directed.

Laying/ Fixing only Galvanised Iron Pipe 50mm bore (dia), as in protection of UG Cable (Serviceable Pipe opbtained from Item No. 12 here-in-before) laid in Trenches/fixing with Poles with Mild Steel Flat Iron Clamps, complete all as specified and as directed. Note :- Cost of Mild Steel Clamp, Nuts, Bolts and painting is deemed to be included in the Quoted Unit Rate.

-Ditto- All as per Item No.42 here-in-above, but GI Pipe of Size 40 mm dia, Complete all as specified and as directed.

-Ditto- All as per Item No.42 here-in-above, but GI Pipe of Size 80 mm dia, Complete all as specified and as directed.

M & L preparing old painted surfaces by scraping and removing old paints, rust, etc. from Steel Tubular Poles of length 8.5/9 Metre (above the Planting Depth and PCC Copings) and Mild Steel Cross Arms, Cable Protection Pipe, Brackets, etc. and applying one Coat of Red Oxide Zinc Chrome Primer, alternate Yellow & Black Strips Painting (4 No. Each Strip 150 mm wide) and remaining portion of Pole and Cross Arms, Cable Protection Pipe, Brackets, etc. treated with Two Coats of Aluminium Paint of following sizes complete all as specified and as directed.

-Ditto- All as per Item No.45 here-in-above, but GI Pole of Size 11 Metre in length, Complete all as specified and as directed.

M & L preparing old painted surfaces by scraping and removing old paints, rust, etc. from Pre-stressed Concrete Pole of length 8.5/ 9.0 Metre (above the Planting Depth and PCC Copings) and Mild Steel Cross Arms, Cable Protection Pipe, Brackets, etc. and applying Two Coats of Synthetic Enamel Painting in alternate Yellow & Black Strips Painting (4 No. Each Strip 200 mm wide) and remaining portion of Pole treated with Two Coats of Exterior Weather Proof Paint and Mild Steel Cross Arms, Cable Protection Pipe, Brackets, etc. treated with Two Coats of Aluminium Paint of following sizes complete all as specified and as directed.

M & L Writing Letter on Steel Tubular/Pre-stressed Concrete Pole (8 Cm in height) with Synthetic Enamel Paint (White) on base of Black Paint in round shape of 15 Cm dia, complete all as specified and as directed.

Treaming of Tree Branch, girth not exc. 50 mm around OH Electric Lines and cleaning upto 3.00 Metre from the OH Electric Lines, removing tremmed Branches from Site(s) and stacking as ordered, complete all as specified and as directed.

Treaming of Tree Branch, girth exc. 50 mm but not exc. 100 mm around OH Electric Lines and cleaning upto 3.00 Metre from the OH Electric Lines, removing tremmed Branches from sites and stacking as ordered, complete all as specified and as directed.

Treaming of Tree Branch, girth exc. 100 mm but not exc. 150 mm around OH Electric Lines and cleaning upto 3.00 Metre from the OH Electric Lines, removing tremmed Branches from sites and stacking as ordered, complete all as specified and as directed.

Cutting unaxious green growth and wild grass by manual labour or by machine at Electrical Installation Premises, around Pole, along the boundary Fencing, removing rubbish from the Site of Work and deposting where directed not exc. 100 Metre from the starting Point, complete all as specified and as directed. Note : The Item shall be operated maximum 2 times in the entire period of the Contract and the measurement will be taken every time independently for Payment.

S & F in replacement connecting and testing MCCB in existing LT Panel of the following capacity, suitable for 415 volts MCCB 4 Pole 630 Amps, thermal magnetic type DN3-630D with breaking capacity 36 KA with thermal magnetic release at 415 volts, including spreader terminal, make: L&T Cat part No. CM93007OOOOAG or equivalent in Indo Asian/ Legrand

S & F in replacement connecting and testing MCCB in existing LT Panel of the following capacity, suitable for 415 volts MCCB 4 Pole 250 Amps, thermal magnetic type DN2-250D with breaking capacity 36 KA with thermal magnetic release at 415 volts, including spreader terminal, make: L&T Cat part No. CM92109OOP1OG or equivalent in Indo Asian/ Legrand

S & F in replacement connecting and testing MCCB 4 Pole 200 Amps, thermal magnetic type DN2-250D with breaking capacity 36 KA with thermal magnetic release at 415 volts, including spreader terminal, make: L&T Cat part No. CM92109OON1OG or equivalent in Indo Asian/ Legrand

S & F in replacement connecting and testing MCCB 4 Pole 160 Amps, thermal magnetic type DN2-250D with breaking capacity 36 KA with thermal magnetic release at 415 volts,including spreader terminal, make: L&T Cat part No. CM92109OON1OG or equivalent in Indo Asian/ Legrand

S & F in replacement connecting and testing MCCB 4 Pole 100 Amps, thermal magnetic type DN2-250D with breaking capacity 25 KA with thermal magnetic release at 415 volts, including spreader terminal, make: L&T Cat part No. CM92108OOL1OG. or equivalent in Indo Asian/ Legrand

S & F in replacement connecting and testing MCCB 4 Pole 63 Amps, thermal magnetic type DZ1-160D with breaking capacity 36 KA with thermal magnetic release at 415 volts, including spreader terminal, make: L&T Cat part No. DZ1F0063DXD1A or equivalent in Indo Asian/ Legrand

S& F in replacement LT digital Amp meter of size 96x96mm 0 to 200 Amp,Class 1 Make : L&T and equivalet in Havells/ Indo Asian

S& F in replacement LT digital volt meter of size 96x96mm 0 to 500 volts ,Class 1 Make : L&T and equivalet in Havells/ Indo Asian

S& F in replacement LT CTs of rating 200/5 Amp Make : L&T and equivalet in Havells/ Indo Asian

Cutting out the burnt out cable end and reconnecting with providing new lugs,tapes etc for cable size 25 sqmm 3.5 core to 50 sqmm 3.5 core.

Cutting out the burnt out cable end and reconnecting with providing new lugs,tapes etc for cable size 70 sqmm 3.5 core to 95 sqmm 3.5 core.

Cutting out the burnt out cable end and reconnecting with providing new lugs,tapes etc for cable size 120 sqmm 3.5 core to 300 sqmm 3.5 core.

Supply and fixing in replacement of old unserviceable Four pole onload changeover switch with advanced neutral having current rating 200 Amp with phase barrier & handle with door interlock kit in OPEN EXECUTION all as specified and directed by Engr in charge.Make-L&T, equivalent of C&S and Havells.

Supply and fixing in replacement of old unserviceable Four pole onload changeover switch with advanced neutral having current rating 400 Amp with phase barrier & handle with door interlock kit in OPEN EXECUTION all as specified and directed by Engr in charge.Make-L&T, equivalent of C&S and Havells.

S&F FRLSH Single core Conductor 2.5 Sqmm for repair and replacement in panel / fixing of Street of repaired light complete all as specified and directed.

S&F Aluminium thimble for cable size of 300/400 Sqmm complete.

S&F Aluminium thimble for cable size of 95-120 Sqmm complete.

S&F Aluminium thimble for cable size of 70 Sqmm complete.

S&F Aluminium thimble for cable size of 50 Sqmm complete.

S&F Aluminium thimble for cable size of 35 Sqmm complete.

S&F Aluminium thimble for cable size of 25 Sqmm complete.

S&F Aluminium thimble for cable size of 16 Sqmm complete.

S&F Aluminium thimble for cable size of 10 Sqmm complete.

Replacement of old unsv rubber mat with the new rubber mat suitable for LT panel of size 2mx1mx15mm thick,ISI marked complete all asected Make : Deep Jyoti

Material and labour straight through joint (epoxy type) including jointing kit complete for making joints suitable for UG aluminium conductor cable 3 ½ core of size 35 Sqmm to 50 Sqmm complete all as specified and directed.

Material and labour straight through joint (epoxy type) including jointing kit complete for making joints suitable for UG aluminium conductor cable 3 ½ core of size 70 Sqmm to 95 Sqmm complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4.0 mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh refilling with vegetable soil without bolders and stones, gravels and aggregate etc,and CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including testing on completion. NOTES : The unit rate includes for protection pipe and GI strip dia from top of earth plate up to 5.00 meter above ground level.

M&L for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised Iron strip of size 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised steel and GI Protection pipe light grade 40 mm dia bore for watering funnel with wire mesh refilling with vegetable soil without bolders and stones, gravels and aggregate etc,and CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including testing on completion. NOTES : The unit rate includes for protection pipe and GI strip dia from top of earth plate up to 5.00 meter above ground level.

S&F Aluminium strip 25 x 3.15mm with saddles and fixing screws and run through wall provided with nonconducting plank etc.for down conductors for lighting arrester etc complete.

M&L Earthing complete with Copper earth plate electrode 60cm x 60cm x 3.15 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to Copper earth strip 20 x 3.15 mm thick drawn surrounded from all sides by mixture of charcoal and common salt alternately through and including GI protection pipe of light grade 40 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1 : 3 : 6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part-I. Note : Testing to be carried out after completion, if the earth resistance below 1 ohm is not obtained, earthing shall be renuated at no extra cost till the desired earth resistance is obtained.

S & F Copper strip of size 20 x 3.15 mm buried in ground / fix with saddle and screws etc. for roof and on wall as earth continuity conductor complete all as specified and as directed.

S & F Air Termination, single pointed copper rod 12 mm dia and 300 mm long complete fixed with brazing alll as specified and directed complete all as specified and as directed.

S & F Test point terminal block made of gun metal or Phosphorus bronze size 75 x 75 x 25 mm, drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screw complete all as specified and as directed.

Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 40mm bore (dia) for passing of UG Cable, complete all as specified and as directed. NOTE: GI Pipe laid will be measured and paid separately under appropriate Item.

Taking down unservicable high mast light fittings of any height/watt/make, repair the same in site by opening cover, replace the unsv parts such as LED Driver, lamps, holder,capacitor etc and unsv/burnt cable etc as required at site, after repairing fixing at same position complete all as specified and directed. NOTE: (a)Parts required for replacement shall be measured and paid separately under inrespective item (b)Labour element for replacement of unserviceable parts will be deemed to be included in quoted rates.

M&L for taking down unserviceable Street/security/Flood Light Fitting of any Watt/Make, repairing the same by opening Cover, re-wir-ing the Light Fitting with 2.5 Sqmm Copper Conductor Cable, multi-stranded, replacing unserviceable Parts as required/ordered, re-fix ing Light Fitting in Original Position after repaired and connecting up, complete all as specified and as directed. NOTE:– (a) Spare Parts such as Lamp, Holder, Ignitor/LED Driver, etc. wherever required will be measured and paid under appropriate Item(s) as ‘Supply only’. (b) Labour Element for replacement of unserviceable Parts is deemed to be included in the QUOTED UNIT RATE.

S & F Junction Box for Street Lights of size 350 x 300 x 150 mm made out of CRCA sheet 2 mm thick totally enclosed, dust and vermin proof, rain protected slanted roof top, door pasted with rubber gasket, water tight IP 42 protection single leaf shutter in front having proper locking arrangements, and painted with powder coating paint and suitable size of "connectwell" stud teriminal (provision for socket bolting)- 05 Nos suitable for 415 volts, 50 Hz, 3 phase 4 wire internal wiring system including MCB TPN 06 to 32 amps- 01 No and mounted on security light pole with suitable clamps, nuts, bolts complete all as specified and as directed. Make:- Hensel or Syntax or Equivalent

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 60 watts with pre wired and necessary mounting arrangements with lumen efficiency >= 110 LPW incl SPD 10KV and provision of 2.5 sq mm twin core aluminium conductor cable multi stranded from fitting to over head line including necessary GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape and taking down old unserviceable Street Light Fitting form Electric Pole of any description complete all as directed by Engineer- in-charge.Make :- Crompton Greaves Cat part No. TRP-409-60-57-SL-GL-NSG or equivallent make of havells/ Wipro

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 45 watts with pre wired and necessary mounting arrangements and with lumen efficiency >= 110 LPW incl SPD 10KV provision of 2.5 sq mm twin core Aluminium conductor cable multi stranded from fitting to over head line including taking down old unserviceable Street Light Fitting form Electric Pole of any description complete all as directed by Engineer- in-charge.Make :- Crompton Greaves Cat part No. TRP-409-45-57-NS-GL-NSG or equivallent make of havells/ Surya

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 Flood light fitting luminaire with high power LEDs as light source and electronic driver of capacity 120 watts with pre wired and necessary mounting arrangement with lumen efficiency >= 110 LPW incl SPD 10KV and provision of 4.00 sq mm three core flexable aluminium conductor cable multi stranded ,connected to existing points in Hanger beam angle of any description complete all as directed by Engineer- in-charge. Make Crompton greaves catpart No. LFLN-120-CDL/60-M or equivalent make of havells/Philips.

S&F FRLSH Single core Conductor 2.5 Sqmm for repair and replacement in panel / fixing of Street of repaired light complete all as specified and directed.

Material and labour for replacement of Street Light Connection using solid copper conductor single core PVC insulated 2.5 sqmm cable for fixing to OH conductor complete all as directed.

Supply in repair Electronic LED Driver of Capacity 45 Watt, suitable for 220/230/240 Volt, complete all as specified and as directed.

Supply in repair Electronic LED Driver of Capacity 60 Watt, suitable for 220/230/240 Volt, complete all as specified and as directed.

Supply in repair Electronic LED Driver of Capacity 90 Watt, suitable for 220/230/240 Volt, complete all as specified and as directed.

Supply in repair Electronic LED Driver of Capacity 100 Watt, suitable for 220/230/240 Volt, complete all as specified and as directed.

Supply only Electronic LED Driver of Capacity 150 Watt, suitable for 220/230/240 Volt, complete all as specified and as directed.

Supply and fixing in replacement of Electronic Surge Protection device (SPD) 10 KV suitable for LED Security light of Capacity 45 Watt, suitable for 220/230/240 Volt, complete all as specified and as directed.

Supply and fixing in replacement of Electronic Surge Protection device (SPD) 10 KV suitable for LED Security light of Capacity 60 Watt, suitable for 220/230/240 Volt, complete all as specified and as directed.

Supply and fixing in replacement of Electronic Surge Protection device (SPD) 10 KV suitable for LED Flood light of Capacity 90/100 Watt, suitable for 220/230/240 Volt, complete all as specified and as directed.

Supply and fixing in replacement of Electronic Surge Protection device (SPD) 10 KV suitable for LED Flood light of Capacity 150 Watt, suitable for 220/230/240 Volt, complete all as specified and as directed.

M&L Street Light Fitting Bracket made out of GI pipe medium grade, 40 mm dia 1.5 mtr long bend to required shape and fixing to pole poles, walls etc., including supply and fixing of MS Clamp, nut-bolts as required duly painted with two coats of aluminium paint over a coat of red oxide primer, including taking down old unserviceable Street Light Fitting bracket, complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4.0 mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh refilling with vegetable soil without bolders and stones, gravels and aggregate etc,and CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including testing on completion. NOTES : The unit rate includes for protection pipe and GI strip dia from top of earth plate up to 5.00 meter above ground level.

S&F Street Light Panel for Mx Load of 12 KW confirms to IS /IEC 60947-4-1 provided with protection degree IP 54 with inbuilt internal short Circuit protection with FRLS low smoke internal wiring with Digital Timer 24 Hr with 65 A triple pole Contactor, 63 A TPN MCB complete all as specified and directed. Model:-IHXTS09120, Make - Havells or equivalent in Styntax, L&T

S&F LEDs aviation light energy saving new generation environmental friendly long life versatile presure die cast aluminium housing with polycarbonate enclosure with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 and for fixing taking GI pipe pipe medium grade 40 mm dia 1.5 mtr long, complete all as specified and as directed. (Make :- BAJAJ, Cat Part No-110731 or equivalent in Havells/Phillips as approved by GE).

bkgeneralstores

M/S S.S.Corporation

United Traders

PURBANCHAL BUILDERS