Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.1 LAccepted-AOC GALI NO 3 HOUSE NO 368 SHANKAR VIHAR COLONY MURAD NAGAR GHAZIABAD UTTAR PRADESH 201206 | GHAZIABAD | UTTAR PRADESH | 201206 | L1 | Accepted-AOC L1 | |
| 2 | L2₹11.0 L+₹92,829.07 (9.21%)Rejected-AOC OUTER RING ROAD NAGWARA BENGALURU 560 045 | BENGALURU URBAN | KARNATAKA | 560045 | L2 | Rejected-AOC L2 |
Tender Value
₹11.7 L
EMD Value
₹12,000
Closing Date
10 Apr 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Manager (ES)
BEL- KOTDWARA
Construction of guest house room over shopping complex at BEL Kotdwara
2023_BEL_92518_1
BEL_KOT/ES/2022-23/115
Limited
Civil Works
Item Rate
120 days
KOTDWARA
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹12,000
Yes
17 Apr 2024
25 Mar 2023
11 Apr 2023
25 Mar 2023
10 Apr 2023
25 Mar 2023
25 Mar 2023 - 28 Mar 2023
Amount
Part "A" - Civil Works
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge
Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters,columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
Centering and shuttering for suspended floors, roofs, landings, balconies and access platform including strutting, propping etc. and removal of form for all heights
Centering and shuttering for lintels, beams, plinth beams, girders, bressumers and cantilevers including strutting, propping etc. and removal of form for all heights
Centering and shuttering for columns, Pillars, Piers, Abutments, Posts and Struts including strutting, propping etc. and removal of form for all heights
Steel reinforcement of Thermo-Mechanically Treated bars of grade Fe-500D or more for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level (Note: The basic rate for steel to be considered is Rs 46.00 per Kg)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in Cement mortar 1:4 (1 cement :4 coarse sand)
Providing 6 mm thick cement plaster of mix 1:3 (1 cement: 3 fine sand) to the ceiling etc.
Providing 12 mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) on concrete surfaces/ brick work etc., complete.
Providing 15 mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) on the rough side of single or half brick wall, cable ducts and for concrete surfaces wherever required etc., complete
Providing two or more coats of plastic emulsion paint of approved brand and manufacture and of required shade over and including a coat of approved primer, with base prepared on 2 to 3 coats of approved putty to give an even shade and finish on new work etc., complete
Providing and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade on New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Providing and painting two or more coats on new work with synthetic enamel paint of approved brand and manufacture to give an even shade
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm.(Basic rate to be considered for tiles including transportation, loading, unloading and taxes shall be @Rs. 660 per sqm)
Providing and laying of size 300x300 mm and minimum 8 mm thick antiskid glazed tile in toilet flooring of approved make colours and shades laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand ) tiles shall be laid with spacers and filled with matching tile matt grout and finished with epoxy grout etc . complete(note: the rate to be quoted shall include pop protective covering at top surface (Basic rate to be considered for tiles including transportation, loading, unloading and taxes shall be @Rs. 400 per sqm)
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(Basic rate to be considered for tiles including transportation, loading, unloading and taxes shall be @Rs. 350/- per sqm)
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators Powder coated aluminium (minimum thickness of powder coating 50 micron)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including providing and applying two or more coats of synthetic enamel painting along with priming coat with approved steel primer etc complete
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge.
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. of double leaved shutters rebating shall be made without any extra cost) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hingesand necessary screws 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. Complete 125 mm
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. Complete
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :(200x10)
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). sal wood
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
Providing and fixing 15mm nominal outer dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings
Providing and fixing 20 mm nominal outer dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings
Providing and fixing 25 mm nominal outer dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings
Providing and fixing soil, waste and vent pipes 75 mm diameter Sand cast iron S&S pipe as per IS: 1729
Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :75 mm dia pipe
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :100 mm dia pipe
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. For 75 mm dia pipe
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. For 100 mm dia pipe
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS - 1729
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 75 mm dia Sand cast iron S&S as per IS - 1729
Providing and 25 mm nominal bore fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 75 mm outlet
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
Providing and fixing floor mounted type WC with UF soft close slim seat cover, Hinges, Accessories Set. (Cat no. ONS-WHT-10753NS250UFSM) of jaquar make and Hand Shower (Health Faucet) with 1.2 Meter Long PVC Tube & Wall Hook (ALD-563) etc., including cutting and making good the wall,floors wherever required and making connection to the water supply and santiary pipe lines with required fixtures complete as per direction of Engineer-in-charge.
Providing and fixing Jaguar make ARIA CAT No 39037 15 mm CP brass bib cock of approved quality etc all complete as per direction of Engineer-in-charge.
Providing and fixing Table Top Basin (as per catalogue. No. 39901 of jaquar) of size: 420x420x135 mm with CP pillar cock (cat No. ARI-39011 of Jaquar) , Angular stop cock with Wall Flange (cat No. ARI-39053 of jaquar), Waste coupling 32 mm Size Half Thread with 80mm height (cat No. ALD-709) and PVC connection pipe with brass unions of `Jaquar' make with necessary coupling etc. cutting and making good the walls wherever required etc., complete
Providing and fixing Angular Stop Cock with Wall Flange of jaquar make (Cat no. ARI-39053)
Providing and fixing Single Lever Exposed Shower Mixer of jaquar make (Cat no. ARI-39119) With Provision For Connection to hand shower ALD-563 With Connecting Legs & Wall Flanges
Providing and fixing Concealed Stop Cock & Flush Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange with Seal of jaquar make (Cat no. ARI-39083K) with Concealed Stop Cock Regular Body Suitable for 15mm Pipe Line with Spindle Extension & Plastic Protection Cap of jaquar make (Cat no. ALD-083CQT)
Providing and connecting braided hose of jaquar make
Providing and fixing Single Towel Rail 600mm Long, Stainless Steel of jaquar make (cat no. ACN-1111SM) and fixing to walls with TW plugs/rawl plugs and matching screws etc., complete.
Providing and fixing Corner Glass Shelf (with Bracket) with all necessary screws and accessories.
Providing and fixing Toilet paper Holder Recessed Type (Stainless Steel) of jaquar make (Cat no. AHS-1551) fixed with wooden/PVC cleats with CP Brass screws etc., complete
Providing and fixing Overhead Shower ø100mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System of jaquar make (Cat no. OHS-1989)
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
Providing and fixing Rectangular shape 1500x450 mm mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
Providing and fixing Chrome finish towel ring round with round flange and fixing to walls with TW plugs/rawl plugs and matching screws etc., complete.
Providing and fixing 150 x 100 mm size P type square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with common burnt clay as per standard design
Constructing brick masonry inspection chamber of inside dimensions 500 x 700 mm and 45 cm deep with 75 class designation bricks in cement mortar 1:5 (1 cement: 5 coarse sand) CI cover with frame (Heavy duty) 500 x 700 mm internal dimensions complete as per standard design.
Making connection of drain or sewer line with existing manhole for pipes 100 to 250 mm diameter including breaking into and making good the walls, floors with cement concrete 1:2:4 mix
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slabover 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing & installing rebaring in chemical (HILTI make HY-110 f/fisher make FISV chemical for steel reinforcement bar up to 16 mm dia all as per instruction of EIC including finishing etc. complete
Providing & fixing 16 mm dia HASE anchor bold of M/s HILTI including drilling required dia etc. complete as per direction of engineer in charge.
Electrical work
Supplying and fixing 4 way Double Door, (TPN DB -LDB)Triple pole and neutral, sheet steel, Double door MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, Triple pole, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Supply and fixing of 60 Watt. LED flood light luminaire having non corrosive die cast Aluminium housing Class - IP65 ref.Make-Bajaj, Model-Magnum,Type-BJFL 60W LED Product Code-169428
Supplying and fixing of 5A to 32A rating, 240V, 10kA, “C” curve, SP miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Supplying and Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable including surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-A
Supplying and Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-A
Supplying and fixing of 20mm dia medium class PVC conduit pipes along with accessories in surface/ recess including enamel painting colour matching to wall in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
Supplying and fixing of 25mm dia medium class PVC conduit pipes along with accessories in surface/ recess including enamel painting colour matching to wall surface in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
Supplying and drawing/wiring of 3 x 1.5 sq.mm size of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
Supplying and drawing/wiring of 3 x 2.5 sq.mm size of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
Supplying and drawing of 3 nos of 4.0 sqmm size FRLS PVC insulated multistrand copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
Supplying and Wiring for circuit/ submain wiring alongwith earth wire with the size of copper wire 2 X 1.5 sq. mm + 1 X 1.5 sq. mm for earthing. FRLS PVC insulated copper conductor, single core cable including surface/ recessed medium class PVC conduit with acessories as required.
Supplying and Wiring for circuit/ submain wiring alongwith earth wire with the size of copper wire 2 X 2.5 sq. mm + 1 X 2.5 sq. mm for earthing. FRLS PVC insulated copper conductor, single core cable including surface/ recessed medium class PVC conduit with acessories as required.
Supplying and Wiring for circuit/ submain wiring alongwith earth wire with the size of copper wire 2 X 4 sq. mm + 1 X 4 sq. mm for earthing. FRLS PVC insulated copper conductor, single core cable including surface/ recessed medium class PVC conduit with acessories as required.
Supplying of LT power cable with Aluminium conductor, XLPE/PVC insulated, PVC inner sheathed, armoured, 1.1KV grade, confirming to IS:1554(part-1), IS:7098(part-1) & relevant standards having 3.5 core of size 35 Sq mm
Supplying and fixing of modular 5A/6A switch on the existing modular plate & switch box including making electrical connections but excluding modular plate etc. as required.
Supplying and fixing of modular 15A/16A SP switch on the existing modular plate & switch box including making electrical connections but excluding modular plate etc. as required.
Supplying and fixing of 3 pin 5/6 A modular socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
Supplying and fixing of 6 pin 15/16 A modular socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
Supplying and fixing PVC batten/ angle holder on the existing junction box/ wooden block including connection etc as required.
Supplying and fixing 1 or 2 modules (75mmX75mm), GI box along with modular base & cover plate for modular switches in recess etc. as required.
Supplying and fixing 3 modules (100mmX75mm), GI box along with modular base & cover plate for modular switches in recess etc. as required.
Supplying and fixing 4 modules(125mmX75mm), GI box along with modular base & cover plate for modular switches in recess etc. as required.
Supplying and fixing 6 modules (200mmX75mm), GI box along with modular base & cover plate for modular switches in recess etc. as required.
Supplying and making end termination with brass compression gland and aluminium lugs for 3½ X 35 sq. mm (32mm) size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
Supplying and fixing 63A rating, 415V, 10kA, “C” curve, TPN miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Supplying & fixing of 3 pin 5 Amp.ceiling rose on the existing junction box including connection all respect.
"Supplying of 10 Watt. 2 Feet Long LED batten with built in electronic driver complete & fixing of the same in the wall/ceiling by providing required, clamps screws/ anchor bolt-nuts, washers etc., making electrical connections, earthing etc., as required/ directed by engineer-in-charge. MAKE- PHILIPS/ WIPRO/BAJAJ/C romptonCat ref.Make-Crompton Productb Name -Light Linea Model No.-ldll10 ,
Supplying of 20 Watt. 4 Feet Long LED battenfitting withbuilt in electronic driver complete & fixing of the same in the wall/ceiling by providing required, clamps screws/ anchor bolt-nuts, washers etc., making electrical connections, earthing etc., as required/ directed by engineer-in-charge. MAKE- PHILIPS / WIPRO/BAJAJ/CGL Cat ref.Make-Crompton Productb Name -Laser Ray NEO Model No.-R20PBC , Cat.Ref. LDLSRN20-CDL,2000 lm.
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Upto 35 sq. mm (clamped with 1mm thick saddle) size on wall surface as required.
Laying of one no 3.5x35sq.mm.PVC/XLPE insulated AL armoured cable direct in ground including excavation maximum upto 1.2 mtr.,sand cushioning protective covering by bricks and refilling the trench etc. as required
Supply, installation, testing and commissioning of 5 star rating geyser vertical type cistern feed ,heating element - 2Kw. ,Capacity 25 Ltr.adjustable temperature thermostat.Make:Orient/Crompton Greaves/Spherehot /Bajaj/Venus
Supply, installation, testing and commissioning of Hot and Cold split AC, Type: High wall, non ductable, air cooled, 100% copper, inverter, split AC, capacity: 2 TR, Star rating: 3 star or more, working voltage: 220V,1Ph, 50Hz, stabilizer free operation. Make-VOLTAS/LG/BLUESTAR/CARRIER/DAIKIN
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
Supplying and fixing of modular bell push
Supplying and fixing of two module stepped type fan regulator on the existing modular plate ,Switch box including connection but excluding modular plate etc as required
Supplying and fixing of electronic ding dong bell Ref Make ANCHOR Code - 38910 Dual Tone Aesthetics.Make-Havells/Cona/Anchor
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying,including painting the exposed portion of loop, all as per standard design complete.
Supplying & fixing of 300mm sweep, single phase, industrial heavy duty exhaust fan 900 RPM having air delivery not less than 1275 CMH with mesh cover/ automated shutters & all accessories and installation of the same by providing suitable bolt & nuts/ screws, making wall opening and making good the damages, making electrical connections, earthing, testing etc., as required. The electrical connections shall be made by providing suitable size PVC insulated flexible copper cable from already provided ceiling rose as required. (Ref: Bajaj-Supreme Dlx) :Orient/Crompton Greaves/Bajaj/hAVELLS
M/s Yashpal singh
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Restricted Tender
This is a Limited tender. Documents are accessible only to bidders authorized by the issuing authority on the government portal.
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .