Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.0 LAccepted-AOC PANDEY BANK THE MALL ROAD RANIKHET DISTRICT ALMORA UTTARAKHAND 263645 | RANIKHET | ALMORA | UTTARAKHAND | 263645 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹41.8 L+₹4.6 L (12.4%)Rejected-Finance 22 JANKALYAN SOCIETY NAVJIVAN AJWA ROAD BARODA 390 019 | BARODA | VADODARA | GUJARAT | 390019 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹47.4 L+₹10.2 L (27.5%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹45.0 L
EMD Value
₹89,960
Closing Date
30 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE PITHORAGARH
HQ CWE (HILLS) PITHORAGARH, Post Bharkatia Pithoragarh ( UK)PIN-262520
CA NO. CWE/HILLS/RKT/46 OF 2022-2023 REPAIR TO CERTAIN ROAD AT CHAUBATTIA MIL STN UNDER GE RANIKHET
2022_MES_561308_2
89924
Open Tender
Civil Works - Roads
Item Rate
180 days
RANIKHET
CLASS D
8 documents required · 8 mandatory
₹500
GE Ranikhet
₹89,960
Yes
2 Feb 2023
2 Dec 2022
6 Jan 2023
2 Dec 2022
30 Dec 2022
17 Dec 2022
2 Dec 2022 - 10 Dec 2022
Amount
M&L for premix bituminous, macadam with binder content of 4% by weight of total mix using paving bitumen VG-30 grade, laid/ rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed. Note for item No. 01 & 03 :(i) Aggregates for Bituminous works shall confirm to clause No 20.B.2.5 of SSR 2009 Part- I (ii) Based on job mix formula, in case the binder content (i.e. Bitumen) is less than the content specified under these items then a minus adjustment @ per kg rate of bitumen as per Purchase Voucher provided by contractor (less consumption) shall be applied on the quoted rate of contractor against these items, hence the quoted rate of contractor shall be reduced based on less content of bitumen required as per job mix formula. However, no price adjustment on plus side shall be made for increase of quantity of bitumen in case of required as per job mix formula. (iii) Design Mix for bituminous macadam shall be carried out through an authorised testing lab and the cost of testing shall be included in quoted rate.
M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed.
M&L for applying evenly a priming/ tack coat with bituminous primer at 5 kg per 10 sq metre VG-10 (Paving bitumen) complete all as specified and directed.
M&L for bituminous premix asphaltic dense concrete 30mm consolidated thickness with 5.5% binder (paving bitumen VG-30) content by weight of total mix as in semi dense asphaltic concrete rolled and compacted to reqd camber complete all as specified and directed
Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm and deep exc 50mm and not exc 100 mm complete all as specified and directed.
M&L for preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat with bituminous primer at 10 kg per 10 sq metre VG-10 (Paving bitumen) complete all as specified and directed.
S&F in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.
Repair to potholes any depth, not exceeding 1 Sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25 mm in depth, making good by applying tack coat with bituminous primer @ 5 Kg per 10 Sqm using paving bitumen putting in premix as specified for thin bituminous carpet ( 2 cm thick) well rammed and sealed with premixed sand seal coat ( 6.8 kg of binder with 0.06 Cum of sand), again well rammed (including supply of premix binder and sand) depth of pot holes n exc 30mm complete all as specified and directed.
Supply and fixing in repair metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including excavation in any type of soil and embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 ( using 20 mm graded aggregate) as in coping/kerb/Road side parapet/Side of interlocking etc. including weathering and throating etc complete all as specified and directed. (Note: Form work will be measured and paid seperately under respective items)
Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed.
M&L for Plain Cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) in foundation, filling, sub base and mass concrete complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and as directed.
M&L for laying hot applied thermoplastic compound (paint) 2.50 mm thick including reflecting glass beads incl cost of all materials, labour, machinery, T&P etc. required for proper completion of work incl all other charges. The finished surfaces to be level, uniform and free from streaks and holes as per MORTH specification No. 803 as per IRC. Painting lines, dashes, arrows, letters etc. on roads, pavements and the like n exc. 10 cm wide with road marking paint, white or golden yellow complete all as specified and directed.
M&L for forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, grade 'B' complete all as specified and directed.
M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compund Grade 'A' complete all as specified and directed.
Demolition of cement concrete(un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for cement concrete work in pavement/hard standing of flexural strength 40kg/SqCm in field using 400 kg of cement per cubic metre, thickness of concrete 25cm or less complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or cocrete surfaces and finished even and smooth without using extra cement on external wall complete all as specified and directed.
M&L for preparation of newly plastered surfaces of brick work/concrete and applying three coats of white wash complete all as specified and directed.
aditya construction
M/s RAM RATAN AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .