Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.3 LAccepted-AOC 9 SHUBHASH BHAWAN RAJENDAR MARG MOUNT ABU 307 501 | MOUNT ABU | SIROHI | RAJASTHAN | 307501 | L1 | Accepted-AOC L1 | |
| 2 | L2₹35.1 L+₹1.6 L (4.89%)Rejected-Finance 274 210 DAFNALA ROAD SHAHIBAUG AHMEDABAD GUJARAT 380009 | AHMADABAD | GUJARAT | 380009 | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹35.4 L+₹1.9 L (5.79%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN L1 | |
| 4 | L4₹38.9 L+₹5.4 L (16.0%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN L1 |
Tender Value
₹32.5 L
EMD Value
₹65,000
Closing Date
25 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Chiloda
GE (AF) Chiloda, Lekawada Patia, PO CRPF Campus, Gandhinagar (Gujarat)-382042
ADDN/ALTN TO ARMOURY AT VSN CHILODA, PROVN OF SINK AND PLATFORM WITH ALLIED WORKS AT BLDG NO P-91, P-92, P-93, P-94 AND P-95 AT HQ SWAC VSN CHILODA AND CERTAIN MINOR WORKS AT VSN CHILODA UNDER GE (AF) CHILODA
2023_MES_615445_1
8942/2023-24/E8
Open Tender
Civil Works
Item Rate
180 days
VSN
As per NIT
7 documents required · 7 mandatory
₹500
GE (AF) Chiloda
₹65,000
Yes
24 Nov 2023
24 Aug 2023
27 Sept 2023
24 Aug 2023
25 Sept 2023
8 Sept 2023
24 Aug 2023 - 7 Sept 2023
Amount
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded pointed in any mortar complete all as specified and as directed.
Demolition of cement concrete (un-reinforced) in ground floor & pavings n. exc. 15 cm thickness (below or above ground level & description as in flooring in gas stores including sand filling and removing the rubbish off premises complete all as specified and as directed.
M&L for 25mm thick cement concrete type B-1,1:2:4 (20mm graded aggregate) as in level course complete all as specified and as directed.
M&L for 50mm thick cement concrete type B-0,1:2:4 (12.5mm graded aggregate) finishing cement concrete even and smooth without using extra cement complete all as specified and as directed.
M&L for 75 mm thick PCC ( 1:3:6) type C-2,(20mm graded aggregate) as in plinth protection incl joint filling etc complete all as specified and as directed.
M&L for 4.5mm thick linoleum, plain coloured, laid dry in floors including stretching, cutting and fitting and sealed down with an approved adhesive complete all as specified and as directed.
M&L for Vitrified ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6. complete all as specified and directed.
M&L for Vitrified ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed in CM 1:4 complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 18-20mm thick over 20mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and as directed.
M&L for Machine cut kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick backing tiles laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
Taking down cement plaster of any description including racking out joints, hacking for key and disposing of debris out side MOD Land complete all as specified and as directed.
M&L for 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonary wall, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for crack filling with asian paints smart care crack seal (up to 3mm cracks and crack to be open in V Shape and then fill with suggested material, touch with asian paints acrylic distemper including ladder or other necessary fittings complete all as specified and as directed.
M&L for existing surfaces of Kota stone flooring to cutting / grinding with semi polish as per specification complete all as specified and as directed by Engr-in-Charge.
S&F in repair 20 mm dia decorative powder coated aluminium anodised tubular curtain rod including brackets with both side finals complete all as specified and as directed.
Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and as directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lepping in square not exc 0.50 Sqm each in each pane complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for oundation, etc. or for shafts, wells, cesspits, exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/ loose soil complete all as specified and as directed.
M&L for plain cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.
M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.
M&L for M-25 design mix (20mm graded aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
M&L for M-25 design mix (20mm graded aggregate) as in columns, pillars, piers, posts and struts etc complete all as specified and as directed.
M&L for M-25 design mix (20mm graded aggregate) as in beams, cantilevers bressummers, lintels over 1.5m span etc complete all as specified and as directed.
M&L for M-25 design mix (20mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for formwork to sides of concrete foundations footings, bases of columns , raft and raft beams , sides an d soffits (if any) of foundation and plinth beams and similar work complete all as specified and as directed.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.
M&L for Mild steel TMT bars 10mm dia and above ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed.
M&L for Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for 40mm thick in cement concrete 1:2:4 Type B-0 as in damp proof course to horizontal or vertical surfaces including necessary formwork etc, complete all as specified and as directed.
M&L for sand filling under floors or in foundations including watereing and consolidation complete all as specified and as directed.
M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even & smooth (without using extra lime or cement) complete all as specified and directed.
M&L Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM (1:4) finished even & smooth (without using extra lime or cement) complete all as specified and directed.
M&L Rendering 10mm thick on concrete surfaces of ceiling, chhja, facia and similar works in CM 1:3 finished even & smooth (without using extra lime or cement) complete all as specified and directed.
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.
All as per item No 35 here in before but without glazing bars.
S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.
S&F flush shutters of 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
S&F 100mm butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.
S&F auminium extruded alloy handles fabricated type anodised of size 150mm complete all as specified and as directed.
S&F aluminium anodised barrel tower bolt 200mm long extruded section complete all as specified and as directed.
S&F aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
S&F 150mm floor door stopper of aluminium alloy powder coated with hard drawn steel spring complete all as specified and as directed.
S&F stainless steel wire cloth 0.50mm nominal dia of wire and average width of apertujre 1.18m fixed with MS screw and bolts complete all as specified and as directed.
Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.
Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.
Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.
S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc.,of Fe.290.Gde-E-165 , drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.
Surface excavation not exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
M&L for 100mm thik PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of flooring complete all as specified and as directed.
M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors including screed bed 15mm thick in CM (1:6) complete all as specified and as directed.
M&L for 60mm thick M-35 grade machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 complete all as specified and as directed.
M&L for preparation of new or previously untreated steel and iron surfaces of any description , over 10 cm in girth or width not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide, zinc primer complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over one coat of chalk whiting on plastered surfaces preparotory to distempering complete all as specified and as directed.
M&L for preparation of new surfaces of ceiling and applying three coats of white washing complete all as specified and as directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of acrylic emulsion (weather coat) paint over one coat of primer by using roller brush complete all as specified and as directed.
M&L for preparation of old surfaces of wall and applying one coat of white wash complete all as specified and as directed.
M&L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.
M&L for preparation of old surfaces of walls and applying two coats of distemper oil emulsion complete all as specified and as directed.
M&L for preparation of old surfaces of wall and applying two coats of acrylic emulsion (weather coat) paint using roller brush complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old wood surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old painted steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and as directed.
M&L for RCC type B1 1:2:4 (20mm graded aggregate) as on slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.
M&L for Granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms including floor and wall like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of walls complete all as specified and directed.
M&L for Digital Glazed ceramic coloured tiles in vertical surface 450 X 300 X 7mm thick and suitable set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.
M&L for preparation of old plastered surfaces of wall and applying one coat of distemper oil emulsion complete all as specified and as directed.
M&L for stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
M&L for waste coupling 40mm of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms complete all as specified and as directed.
M&L for 15mm Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm complete all as specified and as directed.
M&L for 20mm Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm complete all as specified and as directed.
M&L for PVC (SWR) pipes 50mm single socketed in any length with rubber ring joints fixed to wall sand similar works complete all as specified and directed.
M&L for 50mm dia PVC (SWR) bends any radius and similar etc complete all as specified and as directed.
S&F 18mm thick PVC Sheet one side prelaminated of approved texture (Celuca Ply of Rajashree Make or equivalent in sintex as approved by GE) as in cabinet with shelves and partitions) including required beading and necessary fittinge and fixtures as per manufacturers instruction complete all as specified and directed by Engr-in-charge.
S&F steel work in tubular trusses, purlins including special shaped washer etc complete using ERW or induction butt welded square or round tubes conforming to I. S.1161- 1979 grade St.-240 as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.Fe-410-W(Gde- E-250) quality-B complete all as specified and directed by Engr-in-charge.
S&F for mild steel plates (plain or chequered) of Grade Fe 410-W, (Gde- E-250) quality-A as in connecting plates, base plate etc. welding etc complete all as specified and directed.
M&L for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPA as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for providing cement concrete 1:2:4, type B2 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.
M & L for Hardcore of gauge n exc. 63 mm, broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with 8 to 10 ton roller compacted complete all as specified and directed by Engr in Charge.
M & L for Machine pressed precast concrete interlocking paver block of approved shape and size 80mm thickness, with minimum compressive strength of 40 N/Sqmm (M-40 Grade) without correctin factor for chamfering , made in rubber moulds with 0.5mm thick scratch proof lacquer coating on top surface , with white cement and pigment laid over , confirming to IS 15658-2006 complete all as specified and directed.
Material & Labour for road side kerb with factory made Precast cement concrete block of mix 1:3:6 type C-1 using 20 mm graded stone aggregate, n exc 100 mm in width & set in CM 1:4 complete all as specified and directed by Engr in charge.
Excavating in post holes(or similar holes) n.exc 0.5 cum getting out, returning filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding, 25cm watering and removing surplus soil to a distance n.exc 50m and making good surface in soft/ loose soil complete all as specified and directed by Engr in charge.
S&F Fibre glass reinforced translucent sheeting 2mm thick fixed with two corrugations side lap and washer in roof, wall etc.fixed with coach screw and washer in roof, wall etc complete all as specified and directed.
M&L for 30 mm thick bituminised mastic flooring conforming to IS 1195 shall be generally laid in bays and mastic to be melt cooker, coarse aggregate, crushed stone screening and lime dust shall be fed in successive until the entire charge is thoroughly incorporated and cleaning the existing surfaces properly complete as directed by EngrinCharge. After all the aggregate has been incorporated materials shall be mixed throughly and continuously heated for a period of not less than 2 hours temprature of 175 to 200 deg C finishing surface with hand tools to ensure accuracy. Uniform and level surface can be obtained by levelling a heavy wooden float if blowing occure during laying, the bubbles should be punctured and area after should be made good while mastic is still hot the edges of each bay shall be made vertical accommodating next bay. This procedure should be adopted at junctions between floor and finish the same as per manufacturer instructions and through the applicator of manufacturer complete all as specified and directed.
M&L for point wiring for modular accessories with modular metal flush box and cover plate with frame of suitable size complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 Volts grade drawn through PVC heavy duty conduit with 1.5 Sqmm, single core, PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 Volts grade as earth continuity wire terminated in new modular sunken boxes and modular metal flush box as required size at site incl all connected accessories, box made from not less than 1.6mm GI sheet factory made complete all as specified and as directed by Eng-in-Charge for one light / fan point controlled by one switch complete all as specified and directed.
All as per item No 88 here in before but with cable of size 2.5 Sqmm PVC insulated on indepandent board for power plug 15 Amps complete all as specified and directed.
All as per item No 88 here in before but one 3 pin socket out let 5 Amps on the independent board.
S & F modular switch, one way, 6 Amps, 1 module, complete all as specified and as directed.
S & F modular socket, 6/10 Amps - 2/ 3 pin combined 2 module complete all as specified and as directed.
S& F ceiling rose three terminal/ poly carbonate, isolated body complete all as specified and as directed.
M&L sub main wiring complete with PVC insulated cable two run of 04 Sq mm (FRLS) 1100 volts grade with multi stranded copper conductor for drawn through and including PVC conduit pipe with accessories incl 2.5 Sq mm unsheathed multi stranded copper conductor as on earth wire complete all as specified and as directed. Note :- Two runs of 4 sqmm cable with one run of earth continuity cable including PVC casing -capping and its accessories will be measured and paid as one unit
S&F flame proof LED tube light fittings 1 x 30 Watts, 230 volts surface and wall mounted, integrated electronic driver complete with all accessories internally pre wired and including connecting up with twin core twisted flexible cooper conductor cable of size 1.5 sqmm complete all as specified and as directed by Engr in Charge.
S&F exhaust fan 200/250 mm sweep silent type in PVC Body as required at site complete all as specified and as directed by Engr in Charge.
S&F metal sheet MCB enclosure single door 2 way with MCB SPN 32 Amps 230 Volts complete all as specified and directed by Engr in Charge.
S & F modular switch, one way, 16 Amps, 1 module complete all as specified and as directed.
S & F modular socket, 16/15 Amps - 2/ 3 pin combined 2 module complete all as specified and as directed.
ALBA AC AND REF SERVICES
TECH SERVE SOLUTIONS
Shree Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .