Construction of Mini Secretariat/Combined Office building at Shahpur in Tehsil Shahpur, Distt. Kangra, HP (SH-Providing E.I. therein).

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Makes:- L&T(/Entice/Oris)/Legrand(Myrius)/Anchor Roma(Plus)

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Makes:- L&T(Entice/Oris)/Legrand(Myrius)/Anchor Roma(Plus)

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x2.5 Sq. mm.

2x4.0 Sq. mm.

2x6.0 Sq. mm.

2x10 Sq. mm.

2x16 Sq. mm.

Makes:- KEI / Anchor / L&T

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Makes:- KEI / Anchor / L&T

Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Makes:- KEI / Anchor / L&T

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Makes:- KEI / Anchor / L&T

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Makes:- KEI / Anchor / L&T

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.

3x2.5 Sq. mm.

Makes:- KEI / Anchor / L&T

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.

25 mm dia

50 mm. dia

Makes:- Diplast / BEC / L&T

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-

2 modules (78mmx78mmx50mm)

12 modules (205mmx135mmx60mm)

Makes:- L&T / Legrand / Scheneider

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

S.P. 5/ 6 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

Makes:- L&T(Oris)/Legrand(Myrius)/Anchor Roma (Plus)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.

Makes:- L&T(Oris)/Legrand(Myrius)/Anchor Roma (Plus)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.

Makes:- L&T(Oris)/Legrand(Myrius)/Anchor Roma (Plus)

Providing and fixing extra conduit down rod of 20mm dia. x10 cm with 16/0.20 mm twin twisted flexible, cotton braided, copper cable including painting, connections etc. as required. ( Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored) :-

Supplying and fixing call bell / buzzer, suitable for D.C./A.C. single phase,230 volts complete as required:-

Makes:- Anchor / Havells / Goldmedal

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Makes:- Anchor / Havells / Goldmedal

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required.

Single pole. 6-32 Amp

Makes:- L&T / Legrand / Scheneider

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

40 Amps. Cat-A.

63 Amps. Cat-A.

Makes:- L&T / Legrand / Scheneider

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

63 Amps. Cat-A.

Makes:- L&T / Legrand / Scheneider

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required.

Double door-4 way

Double door-6 way

Double door-8 way

Double door-12 way

Double door-16 way

Makes:- L&T / Legrand / Scheneider

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run)

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:-

Armoured cable 240 sq. mm (3.5 core)

Makes:- KEI/ Polycab/ Havells

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Armoured cable 25 sq. mm (3.5 core)

Armoured cable 35 sq. mm (3.5 core)

Armoured cable 240 sq. mm (3.5 core)

Makes:- KEI/ Polycab/ Havells

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required.

Exhaust Fan, Light duty, 300 mm sweep

Makes: Usha / Bajaj / Crompton Greaves

Providing and fixing Aluminium composite panel Sheet for exhaust fan as required complete in all respects.

Supplying and fixing 25 Amp power socket for ac including connections,installation, testing and commissioning etc. as required.

Makes:- L&T( Cat No OC31W25) /Legrand / Scheneider

Supplying and fixing 25 Amp Motor Starter for ac including connections,installation, testing and commissioning etc. as required.

Makes:- L&T( Cat No CB91102MW25) /Legrand / Scheneider

Supplying and erection of 100 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

100 Amps. Cat-A.

Makes:- L&T( Cat No AU15S21003C) /Legrand / Scheneider

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

100 Amps. Cat-A.

Makes:- L&T / Legrand / Scheneider

Supplying and erection of following depth sheet metal cubical sub-main light panel/pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, sub-lighting panel made out of M.S. CRC Sheet 16G, duly painted with Siemens grey powder coated paint with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form. The cubical panel shall be including MCCB 400A 1 No. as incomer, MCCB 250 Amp.1 No., MCCB 160 Amp. 1 No.,MCCB 100 Amp.2 No. as outgoing and the panel should be approved/tested from the CPRI Lab and should be confirm to IS 64139 and as required complete in all respects.

Main Panel - H-1300 X W-1800XD-450MM

The Panel shall include the following Switchgear & accessories; as per the Make of Schneider, L&T, Siemens, ABB etc.

MAIN INCOMER:- MCCB 400A 4P - 1 No., Spreader Terminal MCCB 400A 4P - 2 Nos., RHOM Ext. - 1 No., Digital Metering Set - 1 No.

OUTGOING:- MCCB 250A 4P - 1 Nos., Spreader Terminal MCCB 250A 4P - 2 Nos., RHOM Ext. - 2 Nos., MCCB 160A 4P - 1 Nos., Spreader Terminal MCCB 160A 4P - 2 Nos., RHOM Ext. - 2 Nos. MCCB 100A 4P - 2 Nos., Spreader Terminal MCCB 100A 4P - 4 Nos., RHOM Ext. - 4 Nos.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc.

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc.

Supplying and erection of following depth sheet metal cubical sub-main light panel/pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, sub-lighting panel made out of M.S. CRC Sheet 16G, duly painted with Siemens grey powder coated paint with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form. The cubical panel shall be including MCCB 100A 1 No. as incomer, MCCB 63 Amp.3 No. and 12 Way DB as outgoing and the panel should be approved/tested from the CPRI Lab and should be confirm to IS 64139 and as required complete in all respects.

Main Panel - H-1000 X W-1400XD-300MM

The Panel shall include the following Switchgear & accessories; as per the Make of Schneider, L&T, Siemens, ABB etc.

MAIN INCOMER:- MCCB 100A 4P - 1 No., Spreader Terminal MCCB 100A 4P - 2 Nos., RHOM Ext. - 1 No., Digital Metering Set - 1 No.

OUTGOING:- MCCB 63A 4P - 3 Nos., Spreader Terminal MCCB 63A 4P - 6 Nos., RHOM Ext. - 6 Nos., 12 Way DB, MCB 63 Amp DP - 1 No., RCCB 63 Amp DP - 1 No., MCB 6-32 Amp SP - 8 No., MCB short busbar - 8 No., N.Link & E/Bar -2 No.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc.

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc.

Makes:- L&T / Legrand / Goldmedal

Supplying and erection of following depth sheet metal cubical sub-main light panel/pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, sub-lighting panel made out of M.S. CRC Sheet 16G, duly painted with Siemens grey powder coated paint with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form. The cubical panel shall be including MCCB 160A 1 No. as incomer, Space for single phase KWH Meter, MCB DP 63 Amp. 3 No., MCB DP 40 Amp. 6 No. and MCB DP 100 Amp. 1 No. as outgoing and the panel should be approved/tested from the CPRI Lab and should be confirm to IS 64139 and as required complete in all respects.

Main Panel - H-1900 X W-1400XD-300MM

The Panel shall include the following Switchgear & accessories; as per the Make of Schneider, L&T, Siemens, ABB etc.

MAIN INCOMER:- MCCB 160A 4P - 1 No., Spreader Terminal MCCB 160A 4P - 2 Nos., RHOM Ext. - 1 No., Digital Metering Set - 1 No.

OUTGOING:- Space for single phase KWH Meter, MCB DP 63 Amp. 3 No., MCB DP 40 Amp. 6 No. and MCB DP 100 Amp. 1 No.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc.

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc.

Supplying and erection of following depth sheet metal cubical sub-main light panel/pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, sub-lighting panel made out of M.S. CRC Sheet 16G, duly painted with Siemens grey powder coated paint with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form. The cubical panel shall be including MCCB 160A 1 No. as incomer, MCCB 63 Amp .4 No. and 12 Way DB as outgoing and the panel should be approved/tested from the CPRI Lab and should be confirm to IS 64139 and as required complete in all respects.

Main Panel - H-1000 X W-1400XD-300MM

The Panel shall include the following Switchgear & accessories; as per the Make of Schneider, L&T, Siemens, ABB etc.

MAIN INCOMER:- MCCB 160A 4P - 1 No., Spreader Terminal MCCB 160A 4P - 2 Nos., RHOM Ext. - 1 No., Digital Metering Set - 1 No.

OUTGOING:- MCCB 63A 4P - 4 Nos., Spreader Terminal MCCB 63A 4P - 8 Nos., RHOM Ext. - 8 Nos., 12 Way DB, MCB 63 Amp DP - 1 No., RCCB 63 Amp DP - 1 No., MCB 6-32 Amp SP - 8 No., MCB short busbar - 8 No., N.Link & E/Bar -2 No.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc.

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc.

Supplying and erection of following depth sheet metal cubical sub-main light panel/pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, sub-lighting panel made out of M.S. CRC Sheet 16G, duly painted with Siemens grey powder coated paint with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form. The cubical panel shall be including MCCB 100A 1 No. as incomer, MCCB 63 Amp .3 No. and 12 Way DB as outgoing and the panel should be approved/tested from the CPRI Lab and should be confirm to IS 64139 and as required complete in all respects.

Main Panel - H-1000 X W-1400XD-300MM

The Panel shall include the following Switchgear & accessories; as per the Make of Schneider, L&T, Siemens, ABB etc.

MAIN INCOMER:- MCCB 100A 4P - 1 No., Spreader Terminal MCCB 160A 4P - 2 Nos., RHOM Ext. - 1 No., Digital Metering Set - 1 No.

OUTGOING:- MCCB 63A 4P - 3 Nos., Spreader Terminal MCCB 63A 4P - 6 Nos., RHOM Ext. - 6 Nos., 12 Way DB, MCB 63 Amp DP - 1 No., RCCB 63 Amp DP - 1 No., MCB 6-32 Amp SP - 8 No., MCB short busbar - 8 No., N.Link & E/Bar -2 No.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc.

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc.

Providing, Installation, testing and commissioning of ceiling fan with modular step type electronic fan regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required.

Ceiling Fan 1200 mm sweep, Category-A

Makes:- Usha( Technis plus minimum 3star rating)/Bajaj(Ultima)/Crompton greaves

Supplying and fixing Wall-mounting fan 400 mm sweep including testing, connections and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Wall Fan {Makes: Bajaj (Model: Media BW 2200}

Makes:- Bajaj(Media BW 2200) / Usha / Havells

Providing and fixing decorative extruded tube fixture having high quality design suitable for LED tube up to 18Watt (1800 lumen) 6500K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz, including one no. tube rod 18 Watt complete with all accessories, connections, testing and commissioning etc. as required.

LED 18 watt, 4 feet long.(with Warranty period of Three years)

Makes:- Bajaj(Cat. No. BLRB-DB118, BLRB18W CWC) / Panasonic / Usha Tisva or equivalent

Supplying and fixing Slim Surface mounted led downlighter LED solution suitable for surface application with the use of the latest technology 18 Watt (1800 lumen) 6000K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 150-270V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc.as required.

LED 18 Watt Iris Slim Surface mounted led downlighter (with Warranty period of Three years)

Makes:- Wipro Iris Slim LD80 (Cat No. LD80-171-XXX-60-SM)/Panasonic/Usha tishva or equivalent

Supplying and fixing surface mounting 1'x4' size LED solution suitable for surface application with the use of the latest technology 31 Watt (3100 lumen) 5700K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc. as required complete in all respect.

LED Panel 1'x4', 31 Watt Panel(with Warranty period of Five years)

Makes:- Wipro Aura Plus(Cat No. CRCO13S038HP57G1)/Usha tishva/Panasonic or equivalent

Supplying and fixing suspended luminaire with efficient LEDs and edge-lit optics for contemporary workspaces Depth 15mm, Width 122mm suitable for surface application with the use of the latest technology 32 Watt (3200 lumen) 5700K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc.as required.

LED Suspended Panel(with Warranty period of Five years)

Makes:- Wipro Aslimline(Cat No. LM77-441-XXX-57-V1)/Usha tishva/Panasonic or equivalent

Supplying and fixing Recess mounting Round LED solution suitable for surface application with the use of the latest technology 24 Watt (2048 lumen) 5700K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, Fixture have Surge Protection 2kV suitable for input voltage AC 150-270V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc.as required.

LED 24 Watt Recess Round downlighter(with Warranty period of Five years)

Makes:- Makes:- Wipro Mollis LD06 (Cat No. LD06-301-XXX-57-SM)/Panasonic/Usha tishva or equivalent

Supplying and fixing surface mounting 2'x2' size LED solution suitable for surface application with the use of the latest technology 32 Watt (3200 lumen) 4000K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc.as required.

LED 32 watt surface mounted LED downlight (2'x2')(with Warranty period of Five years)

Make:-Wipro Opus LM 38 (Cat No. LM38-361-XXX-57-XX)/Panasonic/Usha tishva or equivalent

Providing and fixing LED Bulk head of following rating made of ABS housing with polycarbonate diffuser and power LED's, surge protection, suitable for LED upto 10 watt with lumen output of 100 lumens per watt complete with all accesseries, connections, testing and commissioning etc. as required.

LED Bulk head fitting 10 watt(with Warranty period of Three years)

Makes:- Wipro(Cat No. LL24-541-XXX-57-XX)/Panasonic/Bajaj/Usha tishva or equivalent

Supplying and fixing LED linear batten with polycarbonate diffuser compact strcture luminaire with ingress protection IP 40, 40 Watt (3957 lumen) 5700K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc.

40 Watt LED Linear Batten (with Warranty period of Three years)

Makes:- Wipro(Cat No. LL24-541-XXX-57-XX)/Panasonic/Bajaj/Usha tishva or equivalent

Supplying and fixing Surface mounting Round downlighter LED solution suitable for surface application with the use of the latest technology 18 Watt (1890 lumen) 4000K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, Fixture have Surge Protection 2kV suitable for input voltage AC 150-270V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc.as required.

LED 18 Watt Surface Round downlighter (with Warranty period of Three years)

Makes:- Wipro Mollis Surface LD06 (Cat No. LD06-221-XXX-57WSM)/Panasonic/Usha tishva or equivalent

Supplying and fixing Halo Plus Surface mounted led downlighter LED solution suitable for surface application with the use of the latest technology 18 Watt (1800 lumen) 5700K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 150-270V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc.as required.

LED 18 Watt Halo plus Surface mounted led downlighter (with Warranty period of Three years)

Makes:- Wipro Halo Plus LD99 (Cat No. LD99-281-XXX57PMWH)/Panasonic/Usha tishva or equivalent

Providing and fixing high efficiency LED linear lamp for optimum light output with in built LED driver, designed suitable for LED tube up to 10 Watt (1150 lumen) 6500K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 140-270V, 50/60 Hz, including one no. tube rod 10 Watt complete with all accessories, connections, testing and commissioning etc. as required.

LED 10 Watt, 2 feet long (with Warranty period of Three years)

Makes:- Wipro(Cat No. LL20-111-XXX-65NE3)/Panasonic/Usha tishva or equivalent

Supplying and laying of Rubber insulation mat having thickness 22 mm conforming to IS:5424-1969 black / plain / design as required complete in all respects.

Supplying and fixing of following sizes GI pipe (Light Class) along with the accessories in surface / recess including cutting the floor/wall and making good the same in case of recessed piping as required complete in all respect.

GI 80 mm dia.

GI 100 mm dia.

Make:- Finolex/ Diplast/BEC.

Supplying, installation, testing and commissioning of 1.8 Ton (Inverter, Hot & Cold) Split type Air-Conditioning unit of following make confirming to I.S.I.-1391 PART-1992 with ammendment No. 1 (expect power consumption norms) fitted with hermatically shielded air-compressor as required complete in all respects.

A.C. Unit 1.8 Ton capacity

Makes:- Daikin (Model No. : FTHT60)/O'General/Mitsubishi or equivalent

Supplying and fixing wall mounting voltage stabilizer of following rating with output 240 volts with voltage regulation range from 130 volt to 300 volt and auto cut off beyond this range and time delay operation for the surges and fluctuations suitable for 2 TR capacity split type Air-Conditioner including making connections etc. as required complete in all respects.

Automatic Voltage Stabilizer 5 kVA

Makes:- V-Guard (VGB 500 DIGITAL)/Microtek/ Godrej or equivalent

Providing & fixing of M.S. Outdoor heavy duty stand powder coated suitable suitable to hang 1.5/2.0 TR Split type AC with six nos. anchor bolts as required complete in all respects and as per direction of Engineer in charge.

Providing & fixing of extra copper tubes for refrigerant and condensate (3/8" x 1/4" x 5/8") for 2 T.R. split type A.C. units and wiring with suitable size of HRFRLS copper conductor single core cables, including the cost of insulation etc. as required complete in all respects.

Supplying and fixing of 25mm dia of PVC drain pipe along with the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Ratwan Light House

JAMWAL ELECTRICAL WORKS

SHARMA ELECTRICAL CO.

UNITED ENGINEEER AND CONTRACTOR