Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.0 LAccepted-AOC BUILDING NO XIV 231 AMPARANIRAPPEL P O BHARANANGANAM KOTTAYAM 686578 | KOTTAYAM | KERALA | 686578 | L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical THIRUVILAKKIL SANATHANAPURAM P O ALAPPUZHA AMBALAPPUZHA TALUK ALAPPUZHA DISTRICT | - | Rejected-Technical L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical L3 | |
| 4 | Rejected-Technical | - | Rejected-Technical L4 |
| Sl No | Description | Qty | Unit | CATT CONSTRUCTIONS L1 | BAIJU V L2 | SUNIL M L4 | P.T.MICHAEL L3 |
|---|---|---|---|---|---|---|---|
| 1.00Detailed estimate | |||||||
| 1.00 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 24.48 | sqm | 350 ₹8,568 | 200 ₹4,896 Lowest | 339.4 ₹8,308.51 | 328 ₹8,029.44 |
| 1.00 | 4.1.6:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded
stone aggregate 40 mm nominal size derived from natural sources) | 1.84 | cum | 8,200 ₹15,055.2 | 5,000 ₹9,180 Lowest | 7,352.4 ₹13,499.01 | 7,900 ₹14,504.4 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 11,699.4 | kg | 149.85 ₹17,53,154.34 Lowest | 181 ₹21,17,590.5 | 203 ₹23,74,977.19 | 178 ₹20,82,492.31 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 5,964.52 | kg | 149.85 ₹8,93,783.32 | 130 ₹7,75,387.6 Lowest | 164.4 ₹9,80,567.09 | 168 ₹10,02,039.36 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 1,093.16 | sqm | 700 ₹7,65,210.6 | 635 ₹6,94,155.33 Lowest | 740 ₹8,08,936.92 | 690 ₹7,54,279.02 |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 33.19 | metre | 500 ₹16,595 | 300 ₹9,957 Lowest | 496.6 ₹16,482.15 | 480 ₹15,931.2 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 1,169.19 | sqm | 25 ₹29,229.73 Lowest | 60 ₹70,151.34 | 145 ₹1,69,532.41 | 148 ₹1,73,039.97 |
| 1.01 | OD66794/2024-2025:Engaging fitter | 7 | each | 1,200 ₹8,400 | 300 ₹2,100 Lowest | 1,156.2 ₹8,093.4 | 1,180 ₹8,260 |
| 1.01 | OD275646/2025-2026:Engaging Plumper for Repairing Old water supply lines | 8 | each | 1,200 ₹9,600 | 300 ₹2,400 Lowest | 1,156.2 ₹9,249.6 | 1,180 ₹9,440 |
Tender Value
₹49.9 L
EMD Value
₹50,000
Closing Date
17 Feb 2026, 4:00 pmClosed
Executive Engineer
O/o Executive Engineer PWD Building Division Alp.
DEPOSIT-District Jail Alappuzha-Providing truss work for District Jail, Alappuzha.-General Civil Work
2026_PWD_835696_1
PWD/BLDG/TR/10906/2024_5_1_1/1
Open Tender
Civil Works - Buildings
Item Rate
360 days
Alappuzha District
Please refer Tender documents.
6 documents required · 6 mandatory
₹2,760
₹50,000
1 Jun 2026
11 Feb 2026
20 Feb 2026
11 Feb 2026
17 Feb 2026
11 Feb 2026
Detailed estimate
5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
4.1.6:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
OD66794/2024-2025:Engaging fitter
OD275646/2025-2026:Engaging Plumper for Repairing Old water supply lines
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1406162.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.04 MB
preliminaryagt.pdf
Tender Documents • 0.21 MB
tenderform.pdf
Tender Documents • 0.56 MB
sbd.pdf
Tender Documents • 2.28 MB
BOQ_1406162.xls
BOQ • 0.30 MB
affidavit.pdf
Tender Documents • 0.02 MB
epay.pdf
Tender Documents • 0.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .