Power point arrangement for installation of VSK Display at the adjacent portion of Studio under Paschimbanga Samagra Siksha Mission, 2nd Floor, Bikash Bhawan, Salt lake, Kolkata-991

Amount

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make- Legrand/Seimens/Schneider) up to 160A ii) 4 way Enclosure (607913)

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make- Legrand/Seimens/Schneider) i) 4 way Enclosure (607715)

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make- Legrand/Seimens/Schneider) ii) 2+12 way Enclosure (607712)

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection. (Make- Legrand/Seimens/Schneider) ii) 125 A

Supplying and fixing 240V SP MCB of Breaking apacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Make- Legrand/Seimens/Schneider) i) 6-32 A

Supplying and fixing 240/415 V TP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Make- Legrand/Seimens/Schneider) ii) 63 A

Supplying and fixing 240/415 V DP MCB Isolator on din rail of existing DBs and necessary connection. (Make- Legrand/Seimens/Schneider) i) 40 A

Supplying and fixing 240/415 V FP MCB Isolator on din rail of existing DBs and necessary connection. (Make- Legrand/Seimens/Schneider) i) 63 A

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the 20mm size PVC rigid conduit FR(Precision make) incl. Necy fittings as required i)2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) ECC

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the 20mm size PVC rigid conduit FR(Precision make) incl. Necy fittings as required i) 2x80/0.4 (10 sqmm) + 1x84/0.3 (6 sqmm) as ECC

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the 40 mm size PVC rigid conduit FR(Precision make) incl. Necy fittings as required ii)4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. i)1.5 sq mm

ii) 2.5 sq mm

iii) 6 sq mm

iv) 10 sq mm

v) 16 sq mm

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 1 x 6 A Separate Board

Supply & Fixing 240 V, 3 nos.6A, & 1 no.20A Modular type plug socket with separate 3 nos. 6 A & 1 no. 20A Modular type switch, indicator & 20A Modular type SP MCB 25A on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall incl.S&Fswitch board and cover plate and maling necy. connections with PVC Cu wire and earth continuity wire etc.(Legrand Myrius/ Crabtree/ Siemensf 3 x 6 A + 1 x 16 A Computer Board

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board as per GS. 1 x 16 A Power Socket Board

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board as per GS. 25 A, 3 pin Modular type plug socket

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 4 Module GI Modular Box for OLP Starter

Supply of OLP-3, 25 A is a highly advanced, microprocessor controlled starter used for ACs and other compressor loads. The time-tested combination of Voltcheck, Ampcheck and Timecheck ensures safe operation and long life of AC Compressors. OLP-3, 25 A Starter [Make : Electron/Ultratech/Ultrasafe]

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. With 25x25x3mm angle iron support 300x50x1.25mm (18SWG)

Supply & Fixing of perforated GI cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 300x50x1.25mm (18SWG)

Supply & Fixing of perforated GI cable tray cross member with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 300x50x1.25mm (18SWG)

Supply & Fixing of perforated GI cable tray reducer with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the reducer incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 300x50x1.25mm (18SWG)

Laying of cable as below on existing cable tray and binding with suitable size GI wire a) up to 50 sqmm

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting

Supplying and fixing 4 core compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : a) 4 core, upto 50 sq.mm.

Finishing of the XLPE/PVC insulated armoured cable ends by crimping method with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. a) 4 core 50 sq.mm cable.

Supply of following XLPE insulated & Sheathed cables for Working Voltage up to 1100 Volts of following sizes [Make- Havells/Polycab/Gloster/KEI/RR Kabel/As per choice of EIC]. a) 4 core X 50 sq.mm.

Note: 1) All the above rates should be quoted inclusive of all taxes, duties and all ancilery charges with cost of maintenance, servicing, supply & replacement of spares for 1 (One) year from the date of commissioning. 2 Total rounded off to the nearest rupees.

BARSHA ENTERPRISE (BID ID -7393953)

M/S R. K. ENTERPRISE (BID ID -7306648)

BISWAKARMA ELECTRIC WORKS (BID ID -7394044)

ELECTROMAX (BID ID -7342118)

M/S. TOAD TO TOWER (BID ID -7399000)