SITC of Transformer, Bus duct with other necessary fabricated work with buyback for 285 MLD Terminal Sewage Pumping Station at Vasna of Ahmedabad Municipal Corporation (AMC).

figures and Word) of the estimated cost, as mentioned above. Amount of my / our tender work out of Rs._______ (In figures)

Rupees _________________________ (In words)

Estimated amount put to tender Rs. Estimated amount put to tender Rs.

Add % above Rs. Deduct % below Rs.

Total Rs. Net Rs.

Inwords Inwords

(2) Lump Sump Amount Quoted for Buy Back Items (as per Annexure) in Section F-8 in Vol-I Technical Bid, Rs.________

1. Bidder has to quote % Above (Premium) or % Below (Discount) or As par of total Job, Rs. 7213870/- (i.e. Total Estimated Project

Cost w/o buyback value) and has to carry out work at Ordered Value with any Excess -Less Qty. mentioned in above items as per site

requirement and instruction of Engineer-in-charge.

2. Bidder shall quote for buyback items as per Annexure (BUY BACK ITEM) Section F-8 in Vol-I Technical Bid separately online at

Sr. 2 as indicated above. Bidder to note that net amount quoted by the bidder shall be determined by deducting the total amount of

Sr. 2 as indicated above. Bidder to note that net amount quoted by the bidder shall be determined by deducting the total amount of

buyback quoted by bidder from the amount quoted for works as above at Sr. No. 1 and the net amount so derived shall be considered

for price evaluation purpose to determine lowest bid.

Signature of Contractor

Additional Chief Engineer (S.O.E. & M.)

Ahmedabad Municipal Corporation

Name SITC of Transformer, Busduct with other necessary fabricated work with

of buyback for 285 MLD Terminal Sewage Pumping Station at Vasna

SR. ITEM QTY. UNIT UNIT TOTAL

1 DISTRIBUTION TRANSFORMER 2 Nos. 2541265

SITC of 11/0.433 kV, 2000kVA, Oil filled, Outdoor

Transformer continuously rated, 3-phase, 50 Hz, On

Load Tap Changer (OLTC) with RTCC and AVR,

ONAN cooled, copper double wound core type, vector

group Dyn11, Delta(HT)/Star(LT), Oil immersed

winding with temperature rise in oil / winding 40/45

deg.C above design temperature with neutral brought out

to connect to separate earthing including Terminal

arrangement bushing / cable Box on HT side and bus

duct on LT side, 2Nos. neutral CTs (PS Class and

5P10/5P20) for Stand by Earth Fault (SEF) and REF

protection for differential protection. Neutral CTs shall

be provided before bifurcation of neutral, first fill of oil

along with Fittings & accessories as per Energy

efficiency Level-2 of IS:1180 (Part-1):2021and its latest

amendments and as per Tender Specification.

2 LT BUS DUCT 35 Mtr. 34950

SITC of 3200A, 4P, 415V Sandwich Aluminium

Busduct with 3Phase + 100% N + 50% Integral

Earthing & 2 Runs of 50 x 6 mm Aluminium earthing.

Design Temp. shall be 50°C & suitable for Indoor (IP55)

/outdoor (IP 65) application etc. with required

termination adaptor box for both end and with required

necessary supporting structure etc. as required for

Transformers as per IS & Specifications complete in all

SITC of 3200A, 415V FP (RYBN) set Copper Flexible

(Braided) for both Transformer end and for LT Panel

panel end including required 90° bends, flange ends,

Adopter boxes, Terminal links etc. for Sandwich

Aluminium Bus duct as per IS & Specifications

complete in all respect.

(The supplier has to check/measure the exact quantity

prior to ordering as per site condition)

3 RCC Plinth and Foundation for new Transformer(if 2 Nos. 60000

require) as per tender terms and conditions

4 Dismantling of Existing 02 Nos Transformer and 1 Job. 30000

the bus duct from the site and stack to proper place

as EIC and any civil work require for the bus duct)

5 Providing, Supply of Structure Steel at site of work 5000 Kg. 64.84

with freight, loading, unloading carting, etc.

including all taxes and duties complete such as

joints, channels, angles, Iron Rails,

ISA/ISMC/ISMB/MS flat, Plates, Chequered plates

(below 10mm thickness) for cable trench etc.

required for support structure of all Electro-

mechanical equipment, piping, etc. for support on

floor /wall / beam / brackets etc. as per tender and

6 Labour Charges for lowering, laying, Fixing with 5000 Kg. 11.37

fabrication various size section of MS such as

joints, channels, angles, Iron Rails,

ISA/ISMC/ISMB/MS flat, Plates, Chequered plates,

for cable trench etc Complete with two coats of red

oxide and two coats of approved colour shade of

epoxy paint as per relevant IS and as per

7 Providing and erecting approved make split air- 6 Nos. 62840

conditioning unit consisting of copper condensing

unit with fan motor, hermetically sealed rotary

compressor with accessories etc. duly connected

separately erected evaporating unit and blower

motor with its accessories by means of extra

supplied proper insulated copper tubing, drain PVC

pipes suitable for (cost includes powder coated

Stand, Eco Friendly green gas charging, 15A plug

top & Remote Control) with necessary core cutting.

(5 star rating)

Capacity-2.0 TON

Location- PMCC Panel Room