Refurbishment of Existing Shed/ building at Veterinary Science College, Kamdhenu University, Bhuj Dist.Kachchh (2nd Attempt)

NAME OF WORK: REFURBISHMENT OF EXISTING SHED/ BUILDING AT VETERINARY SCIENCE

COLLEGE, KAMDHENU UNIVERSITY, BHUJ (2nd Attempt)

ABSTRACT (SUB ESTIMATE NO. 1 SHED/ BUILDING)

Sr. Description of item Qty. Rate Rate with Per Amount

A Building work

1 Excavation for foundation in loose or soft soil 29.00 210.42 212.52 Cumt

upto 1.5 mt depth incl. Sorting out and stacking Cumt

of useful materials and disposing the

excavated stuff incl. Refilling the trenches and

watering leveling etc complete as directed by

Engineer in charge

2 Excavation for foundation in dence or hard soil 30.00 269.87 272.57 Cumt

upto 1.5 mt depth incl. Sorting out and stacking Cumt

of useful materials and disposing the

excavated stuff incl. Refilling the trenches and

watering leveling etc complete as directed by

Engineer in charge

3 Excavation for foundation in dense or hard soil 20.00 292.18 295.10 Cumt

from 1.50 mt to 3.00 mt depth incl. Sorting out Cumt

and stacking of useful materials and disposing

the excavated stuff incl. Refilling the trenches

and watering leveling etc. complete as

directed by Engineer in charge

4 Providing and laying rubble stone soling 300 14.00 1073.08 1083.81 Cumt

mm thick including hand packing and filling in Cumt

the interstices with sand/quarry spalls and

compacting etc. complete as per instruction of

Engineer in charge.

5 Providing and laying cement concrete 1:3:6 14.00 3246.30 3278.76 Cumt

mix ( 1 cement :3 coarse sand: 6 graded stone Cumt

agg. of 12 to 20 mm nominal size B.T. kapchi)

for foundation & plinth laid in true line and level

incl. Compacting & curing etc. but excluding

the cost of form work etc. complete as directed

by Engineer in-charge

6 Providing and laying cement concrete 1:2:4 5.00 3703.19 3740.22 Cumt

mix ( 1 cement :2 coarse sand: 4 graded stone Cumt

agg. of 12 to 20 mm nominal size B.T. kapchi)

for foundation & plinth laid in true line and level

incl. Compacting & curing etc. but excluding

the cost of form work etc. complete as directed

by Engineer in-charge

7 Providing and laying controlled cement 15.00 4459.70 4504.30 Cumt

concrete M 200 grade for foundation, footing Cumt

base of column and mass concrete including

curing etc complete including the cost of form

work but excluding the cost of reinforcement as

work but excluding the cost of reinforcement as

directed by Engineer in charge

8 Providing and filling with available excavated 59.00 135.56 136.92 Cumt

earth (excluding rocks) in trench plinth, sides of Cumt

foundation etc in layers not exceeding 20 cms

in depth including consolidating each

deposited layer by ramming and watering in

true line and level etc complete as directed by

Engineer in charge

9 Providing and filling in foundation and plinth 59.00 267.08 269.75 Cumt

with murrum or selected soil in layer of 20 cms Cumt

in thickness incl. dressing, watering and

consolidating each deposited layer by ramming

in true line and level etc complete as directed

by Engineer in charge

10 Providing and filling in foundation and plinth 15.00 477.03 481.80 Cumt

with sand under floor incl. dressing watering Cumt

and consolidating each deposited layer by

ramming in true line and level etc complete as

directed by Engineer in charge )

11 Providing, laying & constructing in true line and 14.00 4172.60 4214.33 Cumt

level brick work using common burnt clay Cumt

building bricks (Conventional bricks) having

crushing strength not less than 35 Kg./Sq.cm.

in foundation and plinth in cement mortar 1:6 (

1 cement : 6 coarse sand ) as directed by

Engineer in-charge

12 Providing, laying & casting ordinary cement 4.00 6311.70 6374.82 Cumt

concrete 1:1.5:3 mix ( 1 cement : 1.5 coarse Cumt

sand: 3 graded stone aggregate 20 mm

nominal size of B.T. Kapchi ) for R.C.C.Coping

etc including cost of formwork, centering,

shuttering, scaffolding, curing, compacting with

vibrators etc complete incl. Finishing the

exposed face even and smooth with C.M. 1:3 (

1 cement : 3 sand) but excluding the cost of

reinforcement as directed by Engineer in

13 Providing , laying & casting controlled cement 10.00 6481.65 6546.47 Cumt

concrete M 200 grade for R.C.C Ground Beam Cumt

/ Plinth Beam etc including formwork,

centering, shuttering, scaffolding, compacting

with vibrators etc complete incl. Finishing the

exposed face even and smooth with C.M. 1:3 (

1 cement : 3 sand) but excluding the cost of

reinforcement as directed by Engineer in

14 Providing, laying and casting controlled cement

concrete M 200 grade for R.C.C. column

having all section for super structure for

Ground floor upto floor two level laid in true

Ground floor upto floor two level laid in true

line and level including the cost of form work,

compacting by vibrators , curing etc including

finishing the exposed faces even and smooth

with C.M. 1:3 ( 1 cement : 3 sand ) but

excluding the cost of reinforcement etc

complete as directed by Engineer in charge

A For Ground floor

For All Section 9.00 8743.05 8830.48 Cumt

15 Providing, laying & casting in true line & Level

controlled cement concrete M 200 grade for

R.C.C. Beam having all section for super

structure of ground floor up to floor two level

including the cost of form work, centering,

shuttering, compacting with vibrators, curing

etc complete including finishing the exposed

face even and smooth with C.M. 1:3 (

cement : 3 sand) but excluding the cost of

reinforcement etc complete as directed by

Engineer in-charge

A For Ground floor

For All Section 10.00 6752.50 6820.03 Cumt

16 Providing and laying controlled cement

concrete M 200 grade For R.C.C Slab 10 to

cm thick for super structure for first floor up to

floor three level including finishing in C.M. 1:3 (

1 cement : 3 sand) smooth with floating coat of

neat cement slurry including curing etc

complete including the cost of form work but

excluding the cost of reinforcement etc

complete as directed by Engineer in charge

A For Ground floor 9.00 6273.55 6336.29 Cumt

17 Providing, laying & casting controlled cement

concrete M 200 grade for R.C.C Stair case in

true line & level for floor upto floor two level

including cost of form work, finishing smooth

with C.M. 1:3 ( 1 cement : 3 sand ) & finishing

with floating coat of neat cement slurry

including curing compacting as directed by

Engineer in charge

A For Ground floor 15.00 7666.75 7743.42 Cumt

18 Providing and laying TMT bar FE 500/500D

reinforcement for R.C.C. work incl. cutting,

bending, binding and placing in position up to

floor two level as per detail drawing and

structure design etc. complete as directed by

Engineer in-charge

A For Ground floor 8970.00 76.52 77.29 Kg

19 Steel work, welded in built up sections framed 12.16 9018.30 9108.48 Qtl.

work including cutting, hoisting, fixing in Qtl.

position and applying a priming coat of red

lead paint. (A) In beams and joists, channels

angles Tees, flats, hollow sections frame etc.

with connecting plates or angle cleats as in

main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the

20 Providing and Fixing 12 mm thick moisture & 645.00 715.50 722.66 Sq.mt.

fire resistant heavy duty Cement Fibre Board

(High pressure steam cured) Confirming to ISO Sq.mt.

4862-2000 in wall panels of one face of cold

formed galvanised light gauge steel frame

structure to form wall / partition as & Where

directed by Engineer-in-Charge

21 Providing and applying 15 mm thick smooth

cement plaster in single coat on brick/ concrete

wall for interior/exterior plastering for ground

floor up to floor two level in true line and level

in C.M. 1:4 ( 1 cement : 4 coarse sand )

including finishing even and smooth with

floating coat of neat cement slurry including

scaffolding , curing etc complete as directed by

Engineer in-charge

A For Ground floor 164.00 210.42 212.52 Sqmt

22 Providing and applying 10 mm thick smooth

cement plaster in single coat on ceiling

plastering for Ground floor up to floor two level

in true line and level in C.M. 1:4 ( 1 cement :

coarse sand ) including finishing even and

smooth with floating coat of neat cement slurry

including scaffol0ing , curing etc complete as

directed by Engineer in-charge )

A For Ground floor 120.00 196.97 198.94 Sqmt

23 Providing and Applying 20 mm. thick sand 104.00 312.56 315.69 Sqmt

faced Cement Plaster on wall surface at any Sqmt

height above ground level consisting of

mm. thick backing coat of C.M. 1:3 (1 Cement:

3 Sand) and 8 mm. thick finishing coat of C.M.

1:1 (1 Cement: 1 Sand) in true line level

including cost of scaffolding curing etc

complete As directed by E.I.C.

24 Provoding and fixing flush door shutters, solid 57.00 3312.00 3345.12 Sqmt

core construction with frame of first class Sqmt

hardwood with cross

board and face veneer or plywood face panels,

including teak wood frame of size 75 mm x

mm including anodised alluminium butt hinges

with necessary screws. (B) Non-decorative

with necessary screws. (B) Non-decorative

type and block board core anodised alluminium

butt hinges in flush door shutters (2) 35 mm

25 Providing & fixing color anodized aluminum 8.00 4470.50 4515.21 Sqmt

Partation with glazed door framed with Sqmt

anodized aluminum section 63.50 x 38 mm

(Jindal 20004), Shutter section top and bottom

50.00 x 44.45 (Jindal 19555), middle section

83.50 X 44.45mm (Jindal -19535) Vertical

section 47.62 X 44.45mm (Jindal 19501)

JINDAL or equivalent make and fixing 'Assai'

make Gray Sun glass of 5 mm thick in

aluminum frame with glazing clip, nylon rubber

packing, Alluminium body door closer of ISI

make and S/S heavy hinges , handle, stopper,

etc complete as directed by E.I.C.

26 Providing and fixing window having extruded 208.00 2119.14 2140.33 Sqmt

aluminum Colour anodized section frame main Sqmt

outer size 127mm x 38.10mm x 1.35mm @wt.

1.384kg/m, horizontal Four track member size

kg/m, vertical member of size 122.20mm x

31.75mm x 1.50mm @1.398 kg/mt with sliding

shutters of horizontal member size 40mm x

18mm x 1.29mm@ 0.456kg/mt ,vertical

member of size 40mm x 18mm x 1.29mm @

0.456 kg/mt with 5 mm thick transparent

bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame

as per details etc complete for window.

27 Providing and fixing standared extruded of 1.00 1163.92 1175.56 Sqmt

alluminium section of size 63mm x 38.10mm x Sqmt

1.2mm @ Wt. 0.643 Kg/mt with colour

anodized alluminium frame for ventilation with

5 mm thick frosted glass as details etc

complete for Ventilation

28 Providing and fixing M.S. Plain grill as per 3744.00 109.65 110.75 Kg

drawing with M.S. flats, square bar, round bar Kg

etc. in required size and spacing in wooden

frames of windows and ventilators, stair railing

including one coat of primer and two coat of

enamel oil paints of approved quality, brand

and shade etc complete as directed by

Engineer in-charge

29 Providing, laying & fixing 25 mm thick polished 1382.00 1003.83 1013.87 Sqmt

kotah stone slab flooring over 20mm (average) Sqmt

thick base of cement mortar 1:6 (1 cement :

coarse sand) laid in true line, level and slope

including jointed with gray cement slurry

including curing, rubbing and polishing etc

including curing, rubbing and polishing etc

complete as directed by Engineer in charge

30 Providing, laying and fixing 25 mm th. Polished 30.00 1132.82 1144.15 Sqmt

kotah stone slab in risers, steps, dado and Sqmt

pillars laid in 10 mm th. Cement mortar 1:3 (

cement :3 sand) laid in true line level and slope

& jointed with grey neat cement slurry including

curing, rubbing & polishing etc complete as

directed by Engineer in charge

31 Providing, fabricating and fixing CRC square 2400.00 129.85 131.15 Kg

pipe for the railing with top Pipe of 75x75 mm, Kg

Horizotal 25x25 mm (4 Rows),Vertical of 50x50

mm size in parapet, stair, terrace and dom

structure etc including fabricating, hoisting

fixing in position with angle cleats etc in RCC

or masonry etc. including applying one coat of

zink oxide primer paint and two coats synthetic

enamel oil paint of approved quality and shade

enamel paint, including scaffolding etc

complete as directed by Engineer in charge

Total amount of Building work

Total amount of Building work

B Water supply and drainage

1 Providing and fixing vitreous china sink of size 40.00 2370.86 2394.57 Nos.

600 mm x 450 mm x 150 mm with C.I. or M.S. Nos.

brackets, painted white including cutting hole

in wall and making good the same incl. C.P.

brass waste etc. complete as directed by

Engineer in charge.

2 Providing & fixing to wall, ceiling and floor

following dia nominal bore UPVC tubes for

cold water ASTRAL, FINOLEX, PRINCE,

SUPREME make of 40 sch. including cost of

all fittings of Astral Or equivalent make

concelled pipe line including making groove

and filling the same for the wall, ceiling and

floor including testing of no leakage etc

complete as directed by Engineer in charge.

(a) 15 mm internal dia. 150.00 71.93 72.65 Rmt

(b) 25 mm internal dia. 150.00 90.93 91.84 Rmt

(c) 40 mm internal dia. 100.00 146.65 148.12 Rmt

(d) 50 mm internal dia. 100.00 193.73 195.67 Rmt

3 Providing and fixing following dia nominal size

gun metal non return type (heavy) full way

wheel valve of approved quality and brand

including fixing in proper pipe line in position

including testing the joints for no leakage as

directed by Engineer in charge

4 Providing and fixing 15mm dia AQUEL Make 40.00 737.00 744.37 Nos.

(Grenel Design GR06-20) chromium plated Nos.

bass screw down bib cock including fixing in

pipe line in position as directed including

testing etc complete as directed by Engineer in

5 Providing and fixing PVC "Nahni Trap" of 40.00 338.50 341.89 Nos.

“Finolax or Astral” 100 mm dia inlet and 75 mm Nos.

dia outlet nominal dia meter of self cleaning

design with PVC grating including fixing PVC

reducer of 110 mm dia to 75 mm dia and

jointing with adhesive solvent cement including

cost of cutting and making good the walls and

floors etc. compelte as directed by Engineer In

6 Providing, laying & jointing to level and slope 100.00 134.10 135.44 Rmt

40 mm dia rigid PVC pipes of working pressure Rmt

6 kg/Sqcm for Vertical /Horizontal drainage

“Finolex" make line for wall & floors including

necessary fitting such as bends , tees , "

Dutron make " PVC clamps rubber packing

ring etc testing of pipe line, jointing with

adhesive solvent cement including cost of

jointing materials and all other necessary

fixtures , fitted air and water tight testing the

line etc complete as directed by Engineer

7 Providing laying & jointing to level and slope 75 75.00 213.15 215.28 Rmt

mm dia rigid PVC pipes of working pressure 6 Rmt

kg/Sqcm for Vertical /Horizontal drainage

"Finolex" make line for wall & floors including

necessary fitting such as bends , tees , "

Dutron make " PVC clamps rubber packing

ring etc testing of pipe line, jointing with

adhesive solvent cement including cost of

jointing materials and all other necessary

fixtures ,fitted air and water tight testing the line

fixtures ,fitted air and water tight testing the line

etc complete as directed by Engineer in charge

Total amount of water supply and drainage

Total amount of water supply and drainage

Grand total amount A+B

Grand total amount A+B

KAMDHENU UNIVERSITY, GANDHINAGAR

NAME OF WORK: REFURBISHMENT OF EXISTING SHED/ BUILDING AT VETERINARY SCIENCE

COLLEGE, KAMDHENU UNIVERSITY, BHUJ

SCHEDULE B (SUB ESTIMATE NO. 2 TOILET BLOCK)

Sr. Description of item Qty Rate Rate with Per Amount

A Building work

1 Excavation for foundation in loose or soft 16.00 210.42 212.52 Cumt

soil upto 1.5 mt depth incl. Sorting out and Cumt

stacking of useful materials and disposing

the excavated stuff incl. Refilling the

trenches and watering leveling etc

complete as directed by Engineer in

2 Excavation for foundation in dence or hard 23.00 269.87 272.57 Cumt

soil upto 1.5 mt depth incl. Sorting out and Cumt

stacking of useful materials and disposing

the excavated stuff incl. Refilling the

trenches and watering leveling etc

complete as directed by Engineer in

3 Excavation for foundation in dense or hard 23.00 292.18 295.10 Cumt

soil from 1.50 mt to 3.00 mt depth incl. Cumt

Sorting out and stacking of useful

materials and disposing the excavated

stuff incl. Refilling the trenches and

watering leveling etc. complete as

directed by Engineer in charge

4 Providing and laying cement concrete 2.00 3246.30 3278.76 Cumt

1:3:6 mix ( 1 cement :3 coarse sand: 6 Cumt

graded stone agg. of 12 to 20 mm nominal

size B.T. kapchi) for foundation & plinth

laid in true line and level incl. Compacting

& curing etc. but excluding the cost of form

work etc. complete as directed by

Engineer in-charge

5 Providing and laying cement concrete 9.00 3703.19 3740.22 Cumt

1:2:4 mix ( 1 cement :2 coarse sand: 4 Cumt

graded stone agg. of 12 to 20 mm nominal

size B.T. kapchi) for foundation & plinth

laid in true line and level incl. Compacting

& curing etc. but excluding the cost of form

work etc. complete as directed by

Engineer in-charge

6 Providing and laying controlled cement 10.00 4459.70 4504.30 Cumt

concrete M 200 grade for foundation, Cumt

footing base of column and mass concrete

including curing etc complete including the

cost of form work but excluding the cost of

reinforcement as directed by Engineer in

7 Providing and filling with available 42.00 135.56 136.92 Cumt

excavated earth (excluding rocks) in Cumt

trench plinth, sides of foundation etc in

layers not exceeding 20 cms in depth

including consolidating each deposited

layer by ramming and watering in true line

and level etc complete as directed by

Engineer in charge

8 Providing and filling in foundation and 39.00 267.08 269.75 Cumt

plinth with murrum or selected soil in layer Cumt

of 20 cms in thickness incl. dressing,

watering and consolidating each deposited

layer by ramming in true line and level etc

complete as directed by Engineer in

9 Providing and filling in foundation and 6.00 477.03 481.80 Cumt

plinth with sand under floor incl. dressing Cumt

watering and consolidating each deposited

layer by ramming in true line and level etc

complete as directed by Engineer in

10 Providing, laying & constructing in true line 8.00 4172.60 4214.33 Cumt

and level brick work using common burnt Cumt

clay building bricks (Conventional bricks)

having crushing strength not less than

Kg./Sq.cm. in foundation and plinth in

cement mortar 1:6 ( 1 cement : 6 coarse

sand ) as directed by Engineer in-charge

11 Providing, laying & casting ordinary 2.00 6311.70 6374.82 Cumt

cement concrete 1:1.5:3 mix ( 1 cement : Cumt

1.5 coarse sand: 3 graded stone

aggregate 20 mm nominal size of B.T.

Kapchi ) for R.C.C.Coping etc including

cost of formwork, centering, shuttering,

scaffolding, curing, compacting with

vibrators etc complete incl. Finishing the

exposed face even and smooth with C.M.

1:3 ( 1 cement : 3 sand) but excluding the

cost of reinforcement as directed by

Engineer in charge

12 Providing , laying & casting controlled 8.00 6481.65 6546.47 Cumt

cement concrete M 200 grade for R.C.C Cumt

Ground Beam / Plinth Beam etc including

formwork, centering, shuttering,

scaffolding, compacting with vibrators etc

complete incl. Finishing the exposed face

even and smooth with C.M. 1:3 ( 1 cement

: 3 sand) but excluding the cost of

reinforcement as directed by Engineer in

13 Providing, laying and casting controlled

cement concrete M 200 grade for R.C.C.

column having all section for super

structure for Ground floor upto floor two

level laid in true line and level including the

cost of form work, compacting by vibrators

, curing etc including finishing the exposed

faces even and smooth with C.M. 1:3 (

cement : 3 sand ) but excluding the cost of

reinforcement etc complete as directed by

Engineer in charge

A For Ground floor

For All Section 4.00 8743.05 8830.48 Cumt

14 Providing, laying & casting in true line &

Level controlled cement concrete M

grade for R.C.C. Beam having all section

for super structure of ground floor up to

floor two level including the cost of form

work, centering, shuttering, compacting

with vibrators, curing etc complete

including finishing the exposed face even

and smooth with C.M. 1:3 ( 1 cement :

sand) but excluding the cost of

reinforcement etc complete as directed by

Engineer in-charge

A For Ground floor

For All Section 6.00 6752.50 6820.03 Cumt

15 Providing and laying controlled cement

concrete M 200 grade For R.C.C Lintel in

true line and level up to floor two level

including finishing smooth exposed face

in C.M. 1:3 ( 1 cement : 3 sand) smooth

curing, compacting with vibrators etc.

complete including the cost of form work,

scaffolding, shuttering but the excluding

the cost of reinforcement etc complete as

directed by Engineer in charge

directed by Engineer in charge

A For Ground floor 2.00 7693.70 7770.64 Cumt

16 Providing and laying controlled cement

concrete M 200 grade For R.C.C Slab

to 15 cm thick for super structure for first

floor up to floor three level including

finishing in C.M. 1:3 ( 1 cement : 3 sand)

smooth with floating coat of neat cement

slurry including curing etc complete

including the cost of form work but

excluding the cost of reinforcement etc

complete as directed by Engineer in

A For Ground floor 9.00 6273.55 6336.29 Cumt

17 Providing & Laying controlled Cement

Concrete M 200 grade for R.C.C. chajjas

not exceeding 12 cm thickness up to floor

two level in true line level including cost of

necessary shuttering, centering,

formwork, consolidation with machine

mixed vibrators in true line and level

including necessary exposed surface

smooth finishing with C.M. (1:3) and curing

etc. complete but excluding cost of

reinforcement as directed by E.I.C.

A For Ground floor 1.00 6284.70 6347.55 Cumt

18 Providing and laying TMT bar FE

500/500D reinforcement for R.C.C. work

incl. cutting, bending, binding and placing

in position up to floor two level as per

detail drawing and structure design etc.

complete as directed by Engineer in-

A For Ground floor 5840.00 76.52 77.29 Kg

19 Providing, laying & constructing in true line

& level conventional brick work using

common burnt clay building bricks having

crushing strength not less than

Kg./Sq.Cm. above plinth level and super

structure with brick of approved quality in

cement mortar 1:6 ( 1 cement : 6 coarse

sand ) in true line and level including

racking out joints, curing ,scaffolding etc

racking out joints, curing ,scaffolding etc

complete as directed by Engineer in-

A For Ground floor 30.00 4451.53 4496.05 Cumt

B For First floor 7.00 4493.54 4538.48 Cumt

20 Providing, laying & constructing in true line

& level conventional brick work for partition

wall using common burnt clay building

bricks having crushing strength not less

than 35 Kg./Sq.Cm. in super structure with

brick of approved quality in cement mortar

1:4 (1 cement : 4 coarse sand ) in true line

and level including racking out joints,

curing ,scaffolding etc complete as

directed by Engineer in-charge

A For Ground floor 33.00 677.49 684.26 Sqmt

21 Providing and applying 15 mm thick

smooth cement plaster in single coat on

brick/ concrete wall for interior/exterior

plastering for ground floor up to floor two

level in true line and level in C.M. 1:4 (

cement : 4 coarse sand ) including

finishing even and smooth with floating

coat of neat cement slurry including

scaffolding , curing etc complete as

directed by Engineer in-charge

A For Ground floor 129.00 210.42 212.52 Sqmt

B For First floor 35.00 234.08 236.42 Sqmt

22 Providing and applying 10 mm thick

smooth cement plaster in single coat on

ceiling plastering for Ground floor up to

floor two level in true line and level in C.M.

1:4 ( 1 cement : 4 coarse sand ) including

finishing even and smooth with floating

coat of neat cement slurry including

scaffol0ing , curing etc complete as

directed by Engineer in-charge )

A For Ground floor 63.00 196.97 198.94 Sqmt

23 Providing and Applying 20 mm. thick sand 160.00 312.56 315.69 Sqmt

faced Cement Plaster on wall surface at Sqmt

any height above ground level consisting

of 12 mm. thick backing coat of C.M. 1:3 (1

Cement: 3 Sand) and 8 mm. thick finishing

coat of C.M. 1:1 (1 Cement: 1 Sand) in

true line level including cost of scaffolding

curing etc complete As directed by E.I.C.

24 Provoding and fixing flush door shutters, 9.00 3312.00 3345.12 Sqmt

solid core construction with frame of first Sqmt

class hardwood with cross

board and face veneer or plywood face

panels, including teak wood frame of size

75 mm x 50 mm including anodised

alluminium butt hinges with necessary

screws. (B) Non-decorative type and block

board core anodised alluminium butt

hinges in flush door shutters (2) 35 mm

25 Providing and fixing FRP Frame size 100 x 11.00 2354.22 2377.76 Sqmt

50 mm and 28mm thick FRP Depress Sqmt

panel shutter having extra reinforcement

on side and edges and in gel coat finish.

The core of the shutter is to be filled up

with injected fire retardant grade

polyurethane foam done insitu along with

embedded wooden pieces for stiffening

and also for taking hinges and fixtures.

The whole FRP Frame and shutter is to be

water proof, weather proof, termite proof

and resistance to mid acid/Alkali. Rates

are to be inclusive S.S. hinges with brass

screws and aluminum fixture and festener

sleeve etc. complete

26 Providing and fixing standared extruded of 3.00 1163.92 1175.56 Sqmt

alluminium section of size 63mm x Sqmt

with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as

details etc complete for Ventilation

27 Providing and fixing M.S. Plain grill as per 54.00 109.65 110.75 Kg

drawing with M.S. flats, square bar, round Kg

bar etc. in required size and spacing in

bar etc. in required size and spacing in

wooden frames of windows and

ventilators, stair railing including one coat

of primer and two coat of enamel oil

paints of approved quality, brand and

shade etc complete as directed by

Engineer in-charge

28 Providing, laying & fixing 25 mm thick 12.00 1003.83 1013.87 Sqmt

polished kotah stone slab flooring over Sqmt

20mm (average) thick base of cement

mortar 1:6 (1 cement : 6 coarse sand) laid

in true line, level and slope including

jointed with gray cement slurry including

curing, rubbing and polishing etc complete

as directed by Engineer in charge

29 Providing, laying and fixing 25 mm th. 5.00 1132.82 1144.15 Sqmt

Polished kotah stone slab in risers, steps, Sqmt

dado and pillars laid in 10 mm th. Cement

mortar 1:3 ( 1 cement :3 sand) laid in true

line level and slope & jointed with grey

neat cement slurry including curing,

rubbing & polishing etc complete as

directed by Engineer in charge

30 Providing, laying and fixing 6 mm thick 46.00 1007.23 1017.30 Sqmt

white/coloured ceramic tiles (Min. Size of Sqmt

300x450 mm) of approved make for

flooring, treads of steps and landings laid

on 12mm thick base of cement or plaster

of C.M. 1:3 (1 cement : 3 coarse sand) laid

in true line, level, slope and jointed with

white/ coloured cement slurry, curing etc

complete as directed by Engineer in-

31 Providing and laying colored Ceramic ties 170.00 1079.52 1090.32 Sqmt

in skirting and risers of steps not excluding Sqmt

30cms in height on 10 mm thick cement

plaster C.M. 1:3 (1 cement : 3 sand) laid in

true line and level jointed with neat

cement slurry mixed with pigment to match

the shade of the tiles incl. rubbing and

polishing etc. comp. as directed by

Engineer in-charge

32 Providing, laying and fixing 25 mm 18.00 2168.80 2190.49 Sqmt

average thickness coloured Polished Sqmt

Granite jambs/sills in masonry making

necessary groove and finished the same

necessary groove and finished the same

with cement mortar 1:2 (1 cement: 2 sand)

laid in true line level and jointed with gray

cement slurry incl. rubbing etc. comp, as

directed by E.I.C.

33 Providing & laying 18 mm thick Granite 7.00 3246.30 3278.76 Sqmt

stone platform laid on 40 mm thick Sqmt

polished kotah stone laid in Cement

mortar 1:6 ( 1 cement :6 sand) incl. front

patta 10 cm height of quarter round

polished edge and jointing with aradalite &

other required adhesive and

white/coloured cement laid in true line level

in brick walls surface as per design &

drawing including curing etc complete as

directed by Engineer in charge

34 Providing & Applying acrylic oil bound 129.00 98.95 99.94 Sqmt

washable distemper (two coats) of Sqmt

approved brand & manufacture and of

required shade on wall surface to apply

one coat of putty and primer to give an

even and smooth on wall surface including

repairing of patch with plaster of Paris after

thoroughly brushing the surface free from

mortar drops and other foreign matter and

also incl. preparing the surface even &

smoothed, complete as directed by

Engineer in-charge

35 Providing & Applying acrylic oil bound 63.00 107.00 108.07 Sqmt

washable distemper (two coats) of Sqmt

approved brand & manufacture and of

required shade on Ceiling surface to apply

one coat of putty and primer to give an

even and smooth on ceiling surface

including repairing of patch with plaster of

Paris after thoroughly brushing the surface

free from mortar drops and other foreign

matter and also incl. preparing the surface

even & smoothed, complete as directed by

Engineer in-charge

36 Providing, applying and finishing wall with 160.00 119.07 120.26 Sqmt.

weather proof exterior emulsion paint Sqmt

(weather shield max) of approved brand

on wall surface (two coats) to give an

required even shades after thoroughly

brushing the surface to remove all dirt,

dust and remain of loose powered

dust and remain of loose powered

materials etc. complete as directed by

enigineer in charge

37 Providing and applying general insecticide 50.00 90.72 91.63 Sqmt

pest control treatment to floors, cupboards Sqmt

etc including labours, materials etc

complete. Using Heptachloride 20 EC. As

per 6113 pests concentration weight

percent is recommended one litre chemical

emulsion dillute with 39 litre of water will

give total dillute concentration by 40 litre

incl. of one litre chemical emulsion

application 0.5 litre chemical/ Sq.m. of

surface is recommended as per IS or as

directed by Engineer in charge

38 Providing and Laying china mosaic flooring 50.00 790.60 798.51 Sqmt

for plain and curved surface. (A)The first Sqmt

aplying neat cement slurry 2.75 Kg/sqmt

with admixed waterproofing compound

mixing FBR FAIRCRETE polymer @

150ml/Bag after cleaning the surface

preparing base surface (B) The second

applying 50 mm thick cement concrete

flooring 1:2:4 ( 1 cement: 2 coarse sand:4

graded stone agg. of 20mm nominal size

B.T. kapchi) laid in one layer with admixed

water proof compound mixing FBR

FAIRCRETE polymer @ 150ml/Bag (C)

Third applying laid over cement mortar

bedding at 15 mm thick cement mortar 1:4

to plain or slope with cement floating coat

(D) Four aplying 12 mm to 20 mm of

Brocken piece made on site from full size

white glazed tiles to be and to be

tempered to bring mortar ceramic up to

surfaces with using white cement pigment

including rounding of junction and

extending them up to 10 cms along the

wall and curing with bends any pattern of

design as per drawing or direction

including cleaning with water and oxalic

acid etc. complete.

Total amount of building work Rs.

Total amount of building work Rs.

B Water supply and drainage work

1 Providing & fixing to wall, ceiling and floor

following dia nominal bore UPVC tubes

for cold water ASTRAL, FINOLEX,

PRINCE, SUPREME make of 40 sch.

including cost of all fittings of Astral Or

equivalent make concelled pipe line

including making groove and filling the

same for the wall, ceiling and floor

including testing of no leakage etc

complete as directed by Engineer in

(a) 15 mm internal dia. 160.00 71.93 72.65 Rmt

(b) 25 mm internal dia. 160.00 90.93 91.84 Rmt

(c) 40 mm internal dia. 30.00 146.65 148.12 Rmt

(d) 50 mm internal dia. 20.00 193.73 195.67 Rmt

2 Providing and fixing following dia nominal

size gun metal non return type (heavy) full

way wheel valve of approved quality and

brand including fixing in proper pipe line in

position including testing the joints for no

leakage as directed by Engineer in charge

3 Providing and fixing vitreous China flat 6.00 2237.20 2259.57 No

back Wash basin 550 x 400 mm size in No

white or colour wash basin SOLO Make

(suprim Design) with single hole for pillar

tape with Pedestal SOLO Make (suprim

Design) Std. Quality including cutting

holes, 15 mm pillar tape AQUEL Make

(Grenel Design GR06-17), captain head,

screw down, high pressure with sank

screw and back nut washer, with C. P.

screw and back nut washer, with C. P.

brass waste coupling 32 mm dia, with

mm C. P. brass stop tape AQUEL Make

(Grenel Design GR06-18) and 32 mm dia

rigid P. V. C. waste pipe and making good

the same as directed by Engineer In-

4 Providing and fixing earthenware vitreous 2.00 1096.35 1107.31 No

china clay white in colour SOLO Make No

(suprem Design) Premium Quality or

equivalent make Indian type Orissa pan

W.C. of 580 mm x 450 mm size including

fixing with C I 100mm dia pipe connection

upto outface of wall including fixing in

proper position bed concrete with C.M. 1:3

( 1 cement : 3 sand ) in true line, level and

slope with integrated foot rest and ‘P’ or ‘S’

trap including the flush connection

including testing, cleaning, curing etc

complete as directed by Engineer in

5 Providing and fixing glazed eartherware 2.00 3554.42 3589.96 No

cera make Europen type water closet pan No

of parry or equivalent make including

fixing P & S trap including fixing in cement

mortar with plain cement concrete 1:4:8 (1

Cement, 4 Sand, 8 Brick agg. Of 40mm.

Nominal size) curing in true line and

Providing and fixing 12.5 liters low level

flushing cistern of PVC make with a pair of

C. I. or mild brackets complete with fittings

such as lead value less syphon 15mm

nominal size brass ball value with

polythene float C. P. brass handle unions

and couplings for connections with inlet,

outlet and overflow pipes, 40mm. dia

porcelain enamelled flush bend including

cutting holes in walls and making good the

same connecting the flush bend with

cistern and closer (Overflor pipe to be

measured and paid for separately) (A)

Vitreous (i) White Colour etc. complete as

directed by Engineer-in-charge

6 Providing and fixing wash down white 2.00 7751.70 7829.22 No

vitreiou china WALL HUNG water closet No

EUROPEAN TYPE W/C PAN of size

555x360x390mm with intergral "P" or "S"

trap including jointing the trap with pan and

soil pipe in vitereous china white colour of

soil pipe in vitereous china white colour of

Parryware make Flair or cera make Carat

model . Rate inclusive of providing and

fixing seat cover of the same make.etc

complete as directed by Engineer in

7 Providing and fixing 15mm dia AQUEL 8.00 737.00 744.37 No

Make (Grenel Design GR06-20) chromium No

plated bass screw down bib cock including

fixing in pipe line in position as directed

including testing etc complete as directed

by Engineer in charge

8 Providing and fixing PVC "Nahni Trap" of 7.00 338.50 341.89 No

“Finolax or Astral” 100 mm dia inlet and 75 No

mm dia outlet nominal dia meter of self

cleaning design with PVC grating

including fixing PVC reducer of 110 mm

dia to 75 mm dia and jointing with

adhesive solvent cement including cost of

cutting and making good the walls and

floors etc. compelte as directed by

Engineer In charge.

9 Providing and fixing S.W. Gully trap of 150 3.00 1234.57 1246.92 No

mm ‘P’ type with C.I. grating brick masonry No

chamber and water tight C.I. cover with

frame 300 mm x 300m size (inside) with

standard weight etc complete as directed

by Engineer in charge

10 Providing, laying & jointing to level and 32.00 134.10 135.44 Rmt

slope 40 mm dia rigid PVC pipes of Rmt

working pressure 6 kg/Sqcm for Vertical

/Horizontal drainage “Finolex" make line

for wall & floors including necessary fitting

such as bends , tees , " Dutron make "

PVC clamps rubber packing ring etc

testing of pipe line, jointing with adhesive

solvent cement including cost of jointing

materials and all other necessary fixtures

fitted air and water tight testing the line etc

complete as directed by Engineer incharg

11 Providing laying & jointing to level and 12.00 213.15 215.28 Rmt

slope 75 mm dia rigid PVC pipes of Rmt

working pressure 6 kg/Sqcm for Vertical

/Horizontal drainage "Finolex" make line

for wall & floors including necessary fitting

such as bends , tees , " Dutron make "

such as bends , tees , " Dutron make "

PVC clamps rubber packing ring etc

testing of pipe line, jointing with adhesive

solvent cement including cost of jointing

materials and all other necessary fixtures

,fitted air and water tight testing the line etc

complete as directed by Engineer in

12 Providing laying & jointing to level and 12.00 343.65 347.09 Rmt

slope 110 mm dia rigid PVC pipes of Rmt

working pressure 6 kg/Sqcm for “Vertical

/Horizontal drainage “ Finolex make line

for wall & floors including necessary fitting

such as bends , tees , " Dutron make "

PVC clamps rubber packing ring etc

testing of pipe line, jointing with adhesive

solvent cement including cost of jointing

materials and all other necessary fixtures

fitted air and water tight testing the line etc

complete as directed by Engineer in

13 Providing laying & jointing to level and 12.00 304.60 307.65 Rmt

slope 90 mm dia rigid PVC pipes of Rmt

working pressure 6 kg/Sqcm for Horizontal

drainage “Finolex" make line & floors

including necessary fitting such as bends

tees , " Dutron make " PVC clamps rubber

packing ring etc testing of pipe line

jointing with adhesive solvent cement

including cost of jointing materials and all

other necessary fixtures , fitted air and

water tight testing the line etc complete as

directed by Engineer inc harge

14 Providing laying & jointing to level and 8.00 751.80 759.32 Rmt

slope 160 mm dia rigid PVC pipes of Rmt

working pressure 6 kg/Sqcm for Vertical

/Horizontal drainage “ Finolex" make line &

floors including necessary fitting such as

bends , tees , " Dutron make " PVC clamps

rubber packing ring etc testing of pipe line

, jointing with adhesive solvent cement

including cost of jointing materials and all

other necessary fixtures , fitted air and

water tight testing the line etc complete as

directed by Engineer in charge

15 Providing and fixing 75 mm dia PVC cowel 2.00 72.00 72.72 No

vent with flap open PVC clamps including No

fixing with led and spun yarn fitted air and

water tight etc. comp. As directed by E.I.C.

16 Providing and fixing 110 mm dia PVC 2.00 93.00 93.93 No

cowel vent with flap open including fixing No

with led and spun yarn fitted air and water

tight etc. comp. As directed by E.I.C.

17 Constructing brick masonry chamber for 2.00 4411.23 4455.34 No

underground C.I. Inspection chamber and No

bends with bricks having croshing strength

not less than 35kg. Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x

610mm intenal dimension total weight of

cover with frame to be not less than

38Kg.(Wt. of cover 23 Kg.) and Wt. of

frame 15Kg.) (R.C.C. top slab with 1:2:4

mix (1 cement: 2 coarse sand: 4 graded

stone aggregares 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth

with a floating coat of neat cement on

walls and bed concrete etc. complete.(ii)

Inside dimension 500mm x 700mm x

mm deep for pipe line with one or two

18 Providing & fixing on wall face 90 mm dia 10.00 275.30 278.05 Rmt

PVC rainwater pipe 6 Kg/ Sqcm of Rmt

“Finolax" or eqv. make with top and bottom

elbow necessary coupling if any incl. filling

the joints with adhesive fitted air & water

tight with M S clamps testing etc complete

as directed by Engineer in charge

19 Providing and fixing Sintex Premium 5000.00 12.00 12.12 Litre

Range heavy duty white triple layer water Litre

storage tank TLW outer side white layer

intermediate black layer inside sky blue

layer tank made with 100 % virgin Plastic

material with masonry platform etc.

20 Providing & fixing 25mm dia C.P. brass 6.00 261.16 263.77 No

half turn flush cock of approved brand No

including fixing the same in pipe line and

testing et complete as directed by

Engineer in charge

21 Providing and fixing 600mm x 450mm 6.00 850.90 859.41 No

beveled edge mirror of superior glass, No

mounted on 6mm thick A.C. sheet or ply

wood sheet and fixing to wooden plug with

use of C.P. brass screw & washer to the

wall as directed by Engineer in charge

22 Providing and constructing 2.50 m dia and 2.00 39586.65 39982.52 No

3.05 mt depth internal dimension soak No

well, With necessary excavation and

disposal of surplus excavated earth, as

and where directed. With 23cm thick brick

masonry wall in C.M. 1:6, 12 cm thick RCC

1:2:4 (1 cement: 2sand: 4 graded stone

agg. 20mm nominal size) cover slab with

necessary mild or tore steel reinforcement

as per design, finishing expose faces with

15 cm thick smooth plaster, CI man hole

cover with frame of 60 cm x 45 cm size

and weight not lass than 35 kg (with frame

and cover), 75mm dia and 2.00 m long

P.V.C. pipe, 75 mm dia cowl vent.

Including refilling, with Brick Bat, Curing,

scaffolding, formwork, centering,

shuttering, etc complete as directed by

23 Providing and constructing 5.50 x 2.25 x 1.00 102058.60 103079.19 No

2.50 mt depth internal dimension septic No

tank with necessary compartment for grit

chamber with Brick masonry in C.M 1:6

with necessary excavation and disposing

excavated stuff as and where directed,

PCC 1:5:10 (1 cement: 5 sand: 10 graded

stone agg. 40mm nominal size), 15 mm

thick cement plaster in C.M. 1:4, IPS

flooring, 50 mm thick, 10 x 10 mm size

cement vata, brick masonry for partition

wall in C.M. 1:4, 12cm thick RCC 1:2:4 (1

cement: 2 sand: 4 graded stone agg.

mm nominal size ) cover slab with

necessary mild or tore steel reinforcement

as per design, CI main hole cover with

frame of 60 cm x 45 cm size and weight

not lass than 35kg (with frame and cover),

75 mm dia and 1.80 m long PVS pipe,

mm dia PVC cowl vent including curing,

scaffolding, form work, centering,

shuttering etc complete as directed by

24 Providing and fixing copper metal ball cock 2.00 131.57 132.89 No

of 25 mm dia approved quality and brand No

fixing it properly to pipe line for water

storage tank including testing etc complete

as directed by Engineer in charge

25 Providing and fixing earthen ware urinal of 4.00 1267.50 1280.18 No

approved quality and brand, flat back type No

of size 430 x 260 x 350 mm with C. P.

brass stop tap joint with heavy connection

and rigid PVC pipe 32 mm dia as per

directed by Engineer In-Charge

26 Providing & fixing to wall, ceiling and floor

following dia nominal bore CPVC (SDR

13.5) tubes having National Sanitation

Foundation (NSF) seal for potatble water

make including making good the wall,

ceiling and floor including testing of no

leakage etc complete as directed by

Engineer in charge.

(a) 20 mm internal dia. 20.00 206.73 208.80 Rmt

(b) 25 mm internal dia. 20.00 251.31 253.82 Rmt

27 Providing and fixing 8 mm dia Cromium 4.00 419.05 423.24 Nos.

plated brass/Stainless steel jet with flexible No

tube up to 1 meter long with S.S. triangular

plate to W.C. pan and hook including fixing

in pipe line etc. complete. etc complete as

directed by Engineer in charge

28 Providing laying (to level or slope) and

jointing reinforced concrete light duty non-

pressure piprs I.S. class NP 2 of the

following internal diameter with collars and

butt joint including testing of joints etc.

complete as directed by Engineer in

Total amount of water supply and

Total amount of water supply and

Grand total amount (A+B) for 1 block

Grand total amount (A+B) for 1 block

NAME OF WORK: REFURBISHMENT OF EXISTING SHED/ BUILDING AT VETERINARY SCIENCE COLLEGE, KAMDHENU UNIVERSITY, BHUJ

Sub estimate No. 3 Electrification work

Rate Ref. S.O.R. Total

Item Rate with 1%

2023-24 (Item Item Description Unit Estimated Rate Amount

No. Labour cess

Code) Quantities

1 SUBSTATION EQUIPMENT & AUXILIARY

Providing, and erecting 11 KV D.P. 9 mtr. high Structure made of 6" x 3" ‘I’-Section Girder, 4" x 2"channels, clamps, nuts, bolts etc. Suitable for

erection of the followings duly connected with necessary ACSR conductors. as per drawing approved by the Engineer- in charge complete with

following. Height as per IS 7 Mtr above ground )

(A) 11 KV 200 Amps Drop out fuses with S.R.B.P. tubes carries.-Three nos

1 10-2-10 (B) 11 KV G.O.D. switch complete with insulators, operating handle with galvanised pipe, Sq.bar etc. 400 Amp.- One Set Ea. 0.00 1,15,000.00 1,16,150.00 -

(C) 11 KV lightening arrestor with clamp- Three Nos.

(D) 11 KV shackle insulators- Six Nos.

(E) The above D.P. structure should be earthed with 25 mm.X 3 mm thick double copper earth strips run separately and connected with

separate copper plate earth electrode.

Providing, erecting, testing & commissioning approved make oil immersed ONAN cooled, double wound, core type indoor / outdoor copper

wound 11KV/ 433V step down transformer of following capacities operating on 3 phase, 50 Hz 4 wire & neutral earthed system continuously

rated for a full temperature rise in oil not exceeding 45 Deg.C.at maximum ambient temp. of 50 Deg. C. complete with necessary radiator first

filling of new transformer oil & standard fitting as below complying with IS 1180( Part 1 ):2014 standards with energy efficiency level

Off load tap changing range steps +2.5% to -5% on H.V for variation should be provided. The H.V. shall be connected Delta & Secondary with

star connection. The transformer should have cable-end boxes on H.T. side suitable for up to 3 core 150 sq.mm. XLPE cable & on L.T. side

suitable for bus duct or cables as per requirement complete with test certificates from manufacturers

1. Oil conservator with filling Hole & Cap - One No.

2. Thermometer pocket with 6" dial type thermometer switch alarm & trip contacts- Two nos.

3. Silica-gel breather with charge- One No.

4. Plain oil level gauge - One No.

5. Drain / Sampling / Filter valve- One No.

7. Explosion vent with Diaphragm - One No.

8. Rating & Diagram plate - One No.

9. Additional neutral bushing for earthing - One No.

10. Bi directional Roller - Four Nos.

11. Earthing terminals - Two Nos.

12. Lifting lugs - Two Nos.

13. Air release plug. - One No.

14. Double float buchholz relay with Alarm and trip contacts.

15. Control cable as required from Transformer to VCB Panel is to be provided with necessary connection to VCB relays for protection.

as per IS 1180 level-2 "

Max. allowable loses at 50 % of rated load is 0.98 KW and at full load is 2.93 KW Cat.II

Providing and erecting ISI Marked 3core 120 Sq.mm XLPE insulated 11 KV armoured cable Aluminium conductor IS-7098 to be laid on wall

with clamps or in provided cable trench / pipe approved manner as directed.

Providing and erecting cable end termination kit, heat shrinkable Push on type Densons/ Raychem/ Elastimold make suitable for 11 KV XLPE

cable 3core 95 & 120 Sq.mm (A) Outdoor Type

Supplying rubber matting of following thickness as per IS:15652/IEC 61111 (b)4mm

Rate Ref. S.O.R. Total

Item Rate with 1%

2023-24 (Item Item Description Unit Estimated Rate Amount

No. Labour cess

Code) Quantities

Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for HIGH VOLTAGE installation to

be erected as per IS.-2551.

Providing and fixing printed instruction chart both in English and Gujarati and duly framed with front glasses, for treatment of person suffering

from Electric shock with minimum 50" diagonally size.

8 10-2-2 Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply. Ea. 0.00 250.00 252.50 -

Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to

9 10-2-4 use bandage (Band-aid) adhesive tape for medicinal user, Scissors, anti-septic solution (Savlon or similar) etc. (All above contents shall be of Ea. 0.00 350.00 353.50 -

standard makes)

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside

10 10-2-5 and Red out side with FIRE mark, filled with dry-sand and kept on existing stand provided or hung on wall hook. Ea. 0.00 250.00 252.50 -

Supplying and erecting floor mounting stand for keeping four nos. of FIRE buckets comprising 1500 mm in length, 900 mm height frame made

11 10-2-6 out of 30mm X30 mm X 4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two Ea. 0.00 1,100.00 1,111.00 -

coats of approved enamelled silver paint.

Wall hook 22 to 25 cms. projection for keeping fire buckets made out of 15 mm dia. M.S rod grouted in wall to a depth of minimum 15 cms.

Total for Sub head - 1 -

2 MV SWITCHGEAR & POWER PANELS

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal

12 3-4-3 current rating 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader Ea. 1.00 18,950.00 19,139.50

tinned copper & complete erected in existing 16 G.M.S.housing ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. and above at 415 V .

having normal current rating 250A. with variable thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

Providing and erecting following additional parts for panel mounting MCCBs (A)Extended operating rotary handle with pad lock with three

position trip,off,on suitable for 25A to 250 A panel mounting cat-III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in

existing box having following capacity (a) 6 to 32 Amp. Cat.III

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity (A) 6 to 32 Amp. Cat.III

providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark Cat.III

Supplying & erecting approved make Four Pole 415V Motorised Automatic transfer switch including controller with UV/OV, phase sequence,

19 3-18-1 single phasing and frequency protection interior for panel mounting with operating mechanism A.C.23A duty confirming to IS for (B) 160A Ea. 0.00 58,260.00 58,842.60 -

Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, complete erected with necessary connections.

Providing and erecting multifunctional meter suitable for application of Power monitoring and showing measurement of following Voltage,

Frequency, Apparent energy, Apparent power, Active and reactive energy, Active and reactive power, Average voltage Vavg, Peak demand

power PM, QM, SM, Demand power P, Q, S, Apparent power S, S1, S2, S3, Unbalance current, Power factor and displacement PF (signed, four

23 3-17-5 quadrant), Calculated neutral current, Active, reactive, apparent energy (signed, four quadrant), Active power P, P1, P2, P3, Voltage U21, U32, Ea. 1.00 16,500.00 16,665.00

U13, V1, V2, V3, Phase currents, Average current Iag, Peak demand currents, Reactive power Q, Q1, Q2, Q3, Demand current I1, I2, I3, [Us]

rated supply voltage 40...300 V AC 45...65 Hz, 40...300 V DC, Network frequency 50 Hz, Type of network 3P, Display type 7 segments LED,

Display colour Red, Messages display capacity 3 fields of 4 characters, Display digits 12 digit(s) - 14.2 mm in height

Rate Ref. S.O.R. Total

Item Rate with 1%

2023-24 (Item Item Description Unit Estimated Rate Amount

No. Labour cess

Code) Quantities

Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 digits LED display, 0 to 750 AC Volts range erected on

existing panel board with all connection, wiring etc .with manufacturers calibration certificate.

Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits LED display, external CT operated, calibrated for

25 9-2-4. 0 to 1000 Amps suitable to operate on 500 Volt AC , erected on existing panel board with all connection, wiring etc .with manufacturers Ea. 4.00 1,820.00 1,838.20

calibration certificate.

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden erected in existing CRCA box duly secured

with insulating materials connected to the meter

Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V on existing panel board with necessary connections.

28 3-3-4-4 Cable Terminal ( ‘Plain" Type)Set of Four for (i) 32 / 63 Amps Ea. 25.00 450.00 454.50

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected

to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm

35 3-8-1 (C) Suitable for 300 Amp. capacity Rn.Mtr 5.00 5,735.00 5,792.35

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of electrolyte bus having current

density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each bar, erected in existing

cubical panel with necessary connections. (A) Suitable for 100 Amp. Capacity

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board necessary IP-42 and

above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel including cutting, bending, drilling, welding,

riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for

37 3-16-1-B measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking Sq.Mtr 3.00 19,070.00 19,260.70

arrangement and rubber gasket,heavy duty end terminal connection,danger notice board,necessary ventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating.(The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with following

approved manufacturers with following size.(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved

factory (i) with 350mm depth

Supplying & erecting approved make Four Pole 415V Motorised Automatic transfer switch including controller with UV/OV, phase sequence,

38 3-18-1 single phasing and frequency protection interior for panel mounting with operating mechanism A.C.23A duty confirming to IS for (B) 160A Sq.Mtr 1.00 58,260.00 58,842.60

Total for Sub head - 2

Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS: 4722:1968 & BS:5514 having continuous rating,

phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed air/water cooled diesel engine with multi-cylinders developing suitable

BHP not less than following capacity at 1500 RPM with 10% overload for one hour in 24 hours with standard accessories like fly wheel,

39 lubricating oil cooler, "A" class governor, heavy duty fuel wheel and lubricating oil filter, oil bath air filler, lubricating oil pressure gauge, end

exhaust manifold, standard set of tools with adjustable spanners, screw drivers, cylinder head to cover, joint cylinder head to exhaust, element

lube oil filter, 12 / 24 volts electric starting equipment complete with standard heavy duty battery, dynamo, cut-outs, ammeter, necessary

wiring, pressure gauge, starter etc and heavy duty Residential type exhaust silencer and vertical hot air duct both

Rate Ref. S.O.R. Total

Item Rate with 1%

2023-24 (Item Item Description Unit Estimated Rate Amount

No. Labour cess

Code) Quantities

logged with asbestos rope, save oil trays, exhaust piping of required length, standard wall/floor mounted fuel with level indicator and piping

and drip proof alternator, self excited, self regulated, screen protected, with excitation system, capable of delivering the rated system output

at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722- 1968 with voltage regulation +/- 5% of rated

40 voltage from no load to full load. Both the engine and alternator fitted on a common fabricated steel base plate with antivibration mounting

engine and alternator both connected to each other by flexible flange coupling and with floor/wall mounted control panel box comprising

of voltmeter ammeter, selector switches, ACB / MCCB / MCB of adequate capacity,

indicator lamps duly wired with HRC fuses. The alternator & control panel shall be connected with provided suitable capacity armoured cable

and complete with Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet, sound absorbing material Rockwool of 64 density & 100 mm

thick conforming to IS:8183 / PU Foam of 40 Density - at least 40 mm. The resin bonded rockwool covered from inside the canopy by

41 perforated sheet with 3/4 mm holes, sound level not more than 75 dB at a distance of 1 mtr, as per PVCT norms. Erection, commissioning and

satisfactory testing as per requirement with first filling of fuel, oil, etc. with guarantee / Warrantee of complete system for Two years. & with

obtaining all necessary certificate from Electrical Inspector. The Capacity and Ratings of DG sets are as below.

42 10-4-2 (K) (K) Continuous rating of 82.5 KVA ,BHP not less than 102 BHP Set 0.00 6,94,900.00 7,01,849.00 -

Providing & erecting approved make ATS panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of

scope as detailed below:

43 10-4-3 1) Power module: Motorised Changeover switch with ATS controller, Auxiliary contactor with NO & NC contacts with Automatic Battery Each 0.00 74,000.00 74,740.00 -

Charger, indicating lamps for Generator ON, Main

(D) ATS Panel for 75 KVA/82.5 KVA3 phase DG Sets ON, Load and suitable control terminals and power terminals with neutral earthing studs.

Total for Sub head - 3 -

4 DISTRIBUTION BOARD

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (b) sheet steel double door (IP-43)(iv)12 way

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (b) sheet steel double door (IP-43) (iii)8 way

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same

46 3-11-5 company of MCB to be used) suitable for Ea. 1.00 3,986.00 4,025.86

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double door (iii)8 way

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark CAT-III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in

existing box having following capacity (a) 6 to 32 Amp. Cat.III

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of

10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected as directed (i) 25 Amps.DP Cat. III

Total for Sub head - 4

5 CABLE TRENCH & HUME/DWC PIPE

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back filling the same and

making the surface as normal ground.

Rate Ref. S.O.R. Total

Item Rate with 1%

2023-24 (Item Item Description Unit Estimated Rate Amount

No. Labour cess

Code) Quantities

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable or locating the fault all over

the run and back filling the same and making the surface as normal ground.

Covering of cable with second class bricks or cement tiles laid cover the cable crosswise & also on both sides with covering of 7. 5 Cm. layer of

sand above & below cable (16 bricks per meter)

Providing and erecting iron clad cable route marker duly marked with ELE.CABLE of size 23 cm.X 12 cm. Flushed with ground in cement

foundation as directed by Engineer in charge.

Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the road crossing or on floor with necessary material in an

approved manner and making the ground as per original (D) 250 mm dia

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary

57 4-5-8 connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for enclosing Mtr. 30.00 85.00 85.85

cable cable. below ground / road surface for enclosing cable (B)63mm outer dia

Total for Sub head - 5

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of cables (A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road crossing or floor of following size of cables.(A) 4 core 10 Sq. mm

Total for Sub head - 6

7 CABLE TERMINATION

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for following size of cables.(A) 3 & 1/2 / 4 core 25 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.(A) 2 to 4 core 2.5 / 4 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (C) 16/25 Sq.mm.

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected

to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm

Total for Sub head - 7

Rate Ref. S.O.R. Total

Item Rate with 1%

2023-24 (Item Item Description Unit Estimated Rate Amount

No. Labour cess

Code) Quantities

Providing and fixing approved make Perforated C type cable tray. Made from pre- galvanized sheet steel. The cable tray should be bended as

per IS 2062/1079 . with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on

existing support as per Specification and as per instruction of engineer in charge..(3) 150 X 50 X 1.5 mm Thick

Providing and fixing approved make 'T' Junction for Perforated C type cable tray. Made from pre galvanized sheet steel. The Junction should

be bended as per IS 2062/1079. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc.

erected on existing support as per Specification and as per instruction of engineer in charge..(3) 150 X 50 X 1.6 mm Thick ' T' Junction

Providing and fixing approved make '90° Elbow' for Perforated C type cable tray. Made from pre galvanized sheet steel. The Junction should

be bended as per IS 2062/1079. with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as

per Specification and as per instruction of engineer in charge..(3) 150 X 50 X 1.6 mm Thick 90° Elbow

Providing and fixing approved make 'Cross over Junction' for Perforated C type cable tray. Made from pre galvanized sheet steel. The Junction

should be bended as per IS 2062/1079 with max 17.5% perforation and shall be coated with hot dip galvanizing as per IS 2629/4759. with

coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per

instruction of engineer in charge..(3) 150 X 50 X 1.6 mm Thick Cross Junction

89 4-11-8 (5) 300 X 50 X 2.0 mm Thick Cross Junction Ea. 0.00 360 363.60 -

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. angles,square,round, flats,

bars, channels, sections complete with cutting, welding, grinding & finishing duly painted with one coat of red oxide with erection on site as

per direction of engineer in charge with necessary grouting, cementing, plastering & finishing complete.

Providing and erecting ,Fabricating the box type items made from M.S. Sheet with A.I. supports, wings, doors, handles other hardware

91 3-16-4-B materials as per requirement design with finishing by three tank powder coating processed inside and outside painted, erected as directed Kg. 0.00 210.00 212.10 -

including minor civil work.

Total for Sub head - 8 -

9 INTERNAL WIRING

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push & accessories and earth

92 1-2-1 continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front Pt. 150.00 525.00 530.25

plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete CAT-III

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected complete with earth continuity and necessary

93 1-1-4 connection with primary light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic Pt. 75.00 175.00 176.75

sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch and hum free EME step type electronic

94 1-2-2 fan regulator mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden box, single mounting base Pt. 40.00 735.00 742.35

frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete CAT-III

Rate Ref. S.O.R. Total

Item Rate with 1%

2023-24 (Item Item Description Unit Estimated Rate Amount

No. Labour cess

Code) Quantities

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires erected in below type of pipe with 6A Modular type switches and following type of accessories erected

95 1-2-5 on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / Pt. 1.00 653.00 659.53

ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete CAT-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC /

96 1-2-3 Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of Pt. 50.00 553.00 558.53

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete CAT-III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single mounting

97 1-2-4 base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling with required accessories. Cat. III Pt. 20.00 281.00 283.81

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling completeCAT-III

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete CAT-III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with

100 1-2-6 textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge. (19) Ea. 1.00 366.00 369.66

Modular Indicating Call Bell. CAT-III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with

101 1-2-6 textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge. (20) Ea. 1.00 166.00 167.66

Modular Buzzer. CAT-III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with

102 1-3-2 necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed (a) Mtr. 25.00 26.00 26.26

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size

(A) With medium class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be

108 1-4-2 erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of Mtr. 200.00 123.00 124.23

following size (A) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

(i) 4 wire 10 sq. mm

(use earth wire of 4 sq.mm )

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of following size to be erected as

directed. (h) 2.50 Sq.mm 3 core round PVC sheathed

113 1-4-5 (j) 4.00 Sq.mm 3 core round PVC sheathed Mtr. 20.00 140.00 141.40

Total for Sub head - 9

10 LIGHT FIXTURES & FANS

Rate Ref. S.O.R. Total

Item Rate with 1%

2023-24 (Item Item Description Unit Estimated Rate Amount

No. Labour cess

Code) Quantities

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

114 2-15-1 Luminaire efficacy> 85 lumens/watt ,LED No. 50.00 435.00 439.35

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-lll

Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-

surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder

(iii) 10 to 15 watts CAT-III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)(A) Square/ Circular shaped Surface/Recessed Mount Downlight with

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz

117 5-1-6 1200 mm sweep complete having 3blades with aluminium blades with , canopy & 30 cm. down rod erected with earthing.(Make shall be Ea. 20.00 2,275.00 2,297.75

approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with proper

insulation without leakage and earthing.

119 5-2-2 Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab with Making the site as original. Ea. 0.00 50.00 50.50 -

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & square frame.

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable

for medium duty having following dia size and maximum speed in RPM [A] 305 mm dia 900 RPM CAT-II

Total for Sub head - 10

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe

dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover (A)(approved

122 3-14-10 make OEM has to submit test certificate including value of earth resistance of installation duly stamped and signed by agency and officer Ea. 4.00 8,288.00 8,370.88

Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be submitted

by Agency.[B] For Electrical installation up to 11 KV located in other than normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

Rate Ref. S.O.R. Total

Item Rate with 1%

2023-24 (Item Item Description Unit Estimated Rate Amount

No. Labour cess

Code) Quantities

[C] For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like

Automation, SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc.

using proper clamp.

Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using copper clamp.

126 3-14-4 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. Kg. 8.00 928.00 937.28

127 3-14-11 Providing one bag of 25 Kg. Additional Back Filling Compound (BFC) suitable for safe earthing device. Ea. 3.00 825.00 833.25

Total for Sub head - 11

12 SPLIT AC,GYSER

Providing and erecting approved make split air-conditioning unit consisting of copper condensing unit with fan motor, hermetically sealed

rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of

128 8-3-1. extra supplied proper insulated copper tubing,drain PVC pipes suitable for ( cost includes powder coated Stand, Eco Friendly green gas Ea 0.00 39,050.00 39,440.50 -

charging, 15A plug top & Remote Control) with necessary core cutting. For 3 Star Rating of current year (b) for 1.5 ton capacity

Supplying and erecting approved make Instantaneous type water heater with 3Itr.capacity rust free container housed in ABS plastic body

129 8-16-1 insulated with glass wool / puff insulation and 3 Kw heating elements,adjustable thermostat 300 C to 850 C with set to operate at 850 C (+ /-60 Ea 0.00 3,850.00 3,888.50 -

C ) auto reset indication lamps, thermal cut-out, safety valve fusible plug etc. Cat.III

Total for Sub head - 12 -

13 STREET LIGHT

Supplying and Erecting Of L.E.D. type High bay fixture having Power Consumption of following watts with, Input Voltage 110 - 290 V.AC with

full efficiency, Power Factor > 0.9 with 50/60 HZ, CCVC LED Driver used for maximum power saving, Best Quality Aluminium alloy housing and

aluminium Dome for better heat dissipation, CCT Cool white (6000K), CRI 80, Beam angle > 120 degrees, working temperature -20 deg c to +55

deg c, Body IP 65 (B) 90 to 150 watts

Total for Sub head - 13 -

Total For Electrical Work

NAME OF WORK: REFURBISHMENT OF EXISTING SHED/ BUILDING AT

VETERINARY SCIENCE COLLEGE, KAMDHENU UNIVERSITY, BHUJ

Sr.No. Description Estimated amount Rs.

1 Sub estimate No. 1 All shed/ building

2 Sub estimate No. 2 Toilet block

Sub estimate No. 3 Electrification work (All shed and

3 toilet block)

Total Amount Rs.

Total Amount Rs.

Add work charge establishment @ 2%

Add conti. charges@ 1%

Add architect fees @ 1.67%

Grand total Rs.

Grand total Rs.

(A) Percentage Rate Tender (Up to INR 50 Cr. )

I/We am/are willing to carry out the work at… ....................... % above/below percent (Should

be written in figures and words) of the estimated rate mentioned above. Amount of my /ourtender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words