PROVN OF RAIN WATER GUTTER, OPEN DRAIN, WATER STORAGE TANK, AND ALUMINIUM WINDOWS IN P- 92, P- 112, P- 127 and P -128 AT AF STN KASAULI UNDER GE (AF) CHANDIGARH

Amount

REVISED BOQ UPLOADED ON 05 AUG 2022

Excavating over areas n. exc. 1.5m deep and getting out in hard/ dense soil complete all as specified and directed.

Excavating over areas exc. 1.5m but n. exc. 3.00m deep and getting out in hard/ dense soil complete all as specified and directed.

Excavating over areas exc. 3.00m but n. exc. 4.50m deep and getting out in hard/ dense soil complete all as specified and directed.

Excavating in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation etc. and getting out in hard/ dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25cm complete all as specified and directed.

Removing excavated soil to a distance n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed.

M&L hand packing (any thickness) at back of walls, over arches etc. and raising (or lowering) to the required level with broken stone or boulder complete all as specified and as directed.

M&L for cement concrete (1:5:10) type E-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in surface channel & drain complete all as specified and directed.

M&L extra for forming fair finished drains or channels 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stopped ends etc. complete all as specified and directed.

M&L for providing cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping, haunching complete all as specified and as directed.

M&L pre-cast cement concrete (1:2:4) Type B-1 using graded stone aggregate as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) complete all as specified and directed.

M&L for RCC (1:1½:3) type A-1 using 20mm graded stone aggregate for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L RCC M-25 (Design Mix) with graded stone aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under reamed plies and mass concrete complete all as specified and directed.

M&L RCC M-25 (Design Mix) with graded stone aggregates is in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses concrete complete all as specified and directed.

M&L brickwork with old size sub class 'B’ bricks, straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L walling of random rubble stone masonry, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed.

Extra over stone walling for hammer dressing to face stones and dressing to face beds and joints, as specified of random rubble walling, uncoursed or brought upto courses, hammer dressing with maximum depression 40mm on face from straight edge held against the dressed surface n. exc. complete all as specified and as directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work; vertical or batter for rough finished surface of concrete complete all as specified and directed.

Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc vertical or to batter for rough finished surface of concrete complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exc. 1.50 Sqm but n. exc. 4 Sqm complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n. exc. 1.50 Sqm complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F aluminium grills powder coated of standard pattern as per drawing No CE A/F/STD/144/02 dated 17.10.2002 fixed to aluminium frames including aluminium fillet to cover the edges around complete all as specified and as directed.

S&F 100mm dia nozzle pieces (outlets) with gutter, thickness of 1.00mm thick mild steel sheet complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L mild steel TMT bars 8 to 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F framed work such as grills, gratings etc. with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars; barred iron doors, ladders; framed balusters; walkways, railings; frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F welded steel wire fabric n. exc. 4 kg per sqm fixed to wood or steel members complete all as specified and directed.

S&F bands, straps, supports or stays for rainwater; ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; handmade sliding bolts; clamps; holdfasts; wall ties; hooks for hanging fans; plain angle cleats for securing purling to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290. Gde E-165 quality provided at 10m height complete all as specified and directed.

S&F 0.80mm thick plain galvanised, mild steel sheeting, in ridges, hips valley gutters, drip and straight flashings (length and girth as fixed) with 275 grade zinc coating complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium sections as in frame for doors, windows and ventilators (minimum weight not less than 1.20 kg/ RM) with one or more rebates including necessary joining cleats for fixing etc. complete all as specified and directed.

Supply, fabrication and fixing aluminium windows, triple track fabricated with powder coated aluminium sections with three sliding shutters (02 No. glass shutters and 01 No. wire gauzed shutter) with following sections including joining cleats, glazing clips, rubber packaging, snap beading and other builders hardware as required complete all as directed:- [a] Top and side members for three track frame shall be of size 92.00mm x 31.75mm x 1.5mm. [b] Three track bottom rail of frame for sliding of shutter shall be of size 92.00mm x 31.75mm x 1.5mm. [c] Top and bottom rail of sliding shutter shall be of size 40mm x 18mm x 1.55mm. [d] Side rail of sliding shutter with handle and self locking arrangement section shall be of size 40mm x 18mm x 1.55mm. [e] Sliding shutter to be provided with 5.5mm thick tinted glass (Tinted glass to be measured and paid for separately). [f] One shutter to be provided with stainless steel wire cloth 0.36mm dia and width of aperture 1.4mm (Wire cloth to be measured and paid for separately).

Supply, fabrication and fixing aluminium windows, four track fabricated with powder coated aluminium sections with four sliding shutters (03 No. glass shutters and 01 No. glazed shutter) with following sections including joining cleats, glazing clips, rubber packaging, snap beading and other builders hardware as required complete all as directed:- [a] Top and side members for three track frame shall be of size 92.00mm x 31.75mm x 1.5mm. [b] Three track bottom rail of frame for sliding of shutter shall be of size 92.00mm x 31.75mm x 1.5mm. [c] Top and bottom rail of sliding shutter shall be of size 40mm x 18mm x 1.55mm. [d] Side rail of sliding shutter with handle and self locking arrangement section shall be of size 40mm x 18mm x 1.55mm. [e] Sliding shutter to be provided with 5.5mm thick tinted glass (Tinted glass to be measured and paid for separately). [f] One shutter to be provided with stainless steel wire cloth 0.36mm dia and width of aperture 1.4mm (Wire cloth to be measured and paid for separately).

S&F aluminium powder coated (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bar; aluminium section weighing not less than 2.2 KG/ RM including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm Long (2 Nos), suitable handle (1 No) to each shutter complete all as directed.

Taking down cement or cement lime plaster, any description from brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished even and smooth without using extra cement complete all as specified and directed.

M&L raised pointing to random or polygonal rubble, un-coursed or brought upto courses in cement mortar (1:4) complete all as specified.

S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F PVC (SWR) bends any radius 110mm dia all as specified and directed.

S&F plain tinted glass 5.5mm thick fixed in aluminium frame as in windows/ ventilators complete all as specified.

S&F 5.5mm thick figured glass, pin head type fixed in aluminium frame as in windows/ ventilators, complete all as specified.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over & including a coat of chalk whiting complete all as specified and as directed.

M&L preparation of newly steel and iron surfaces of any description not otherwise described over 10cm in width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Varindera And Varindera Construction