Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 LAccepted-AOC | ₹1.7 L | L1 | Accepted-AOC Lowest |
| 2 | L2₹1.7 LRejected-AOC | ₹1.7 L | L2 | Rejected-AOC L2 |
| 3 | L3₹1.8 LRejected-AOC | ₹1.8 L | L3 | Rejected-AOC L3 |
| Sl No | Description | Qty | Unit | Ameer thaha L1 | P.T.MICHAEL L3 | V.RATHEESH L2 |
|---|---|---|---|---|---|---|
| 1.00Appendix A- Maintenance | ||||||
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 154.2 | kg | 457 ₹70,469.40 | 500.29 ₹77,144.72 | 490 ₹75,558 |
| 1.00 | 21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | 31.8 | sqm | 947 ₹30,114.60 | 1,035.5 ₹32,928.90 | 982.73 ₹31,250.81 |
| 1.00 | OD165075/2025-2026:Providing and fixing heavy load swivel castor wheels (set of four) | 6 | each | 1,502 ₹9,012 | 1,642.26 ₹9,853.56 | 1,558.58 ₹9,351.48 |
| 1.00 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 10.24 | sqm | 1,001 ₹10,250.24 | 1,094.16 ₹11,204.20 | 1,038.4 ₹10,633.22 |
| 1.00 | 14.72X:Scaffolding | 1 | each | 10,393 ₹10,393 | 11,357.56 ₹11,357.56 | 10,778.8 ₹10,778.80 |
| 1.01 | 17.7.3:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | 2 | each | 2,004 ₹4,008 | 2,189.69 ₹4,379.38 | 2,078.1 ₹4,156.20 |
| 1.01 | OD165163/2025-2026:Engaging man mazdoor | 10 | each | 847 ₹8,470 | 925.91 ₹9,259.10 | 878.73 ₹8,787.30 |
| 1.01 | OD165164/2025-2026:Engaging plumber for dismantling existing plumbing lines,repairing sanitary fittings and water lines as per the direction of Engineer in charge | 8 | each | 1,030 ₹8,240 | 1,125.45 ₹9,003.60 | 1,068.1 ₹8,544.80 |
| 1.01 | 50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. | 2 | no | 594 ₹1,188 | 649 ₹1,298 | 615.93 ₹1,231.86 |
Tender Value
₹2.1 L
EMD Value
₹5,296
Closing Date
5 Nov 2025, 3:00 pmClosed
Assistant Executive Engineer
O/o The Assistant Executive Engineer,PWD Special Buildings Subdivision, Alappuzha
GENERAL- Govt. TDMCH Alappuzha-Providing additional facilities in Obstetrics and Gynecology Building- Work- General Civil Work
2025_PWD_817145_1
PWD/BLDG/TR/17570/2025(27/AEE)
Open Tender
Civil Works - Buildings
180 days
Alappuzha
Please refer Tender documents.
9 documents required · 9 mandatory
₹555
₹5,296
19 Jan 2026
30 Oct 2025
7 Nov 2025
30 Oct 2025
5 Nov 2025
30 Oct 2025
Amount
Appendix A- Maintenance
21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
OD165075/2025-2026:Providing and fixing heavy load swivel castor wheels (set of four)
21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
14.72X:Scaffolding
17.7.3:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
OD165163/2025-2026:Engaging man mazdoor
OD165164/2025-2026:Engaging plumber for dismantling existing plumbing lines,repairing sanitary fittings and water lines as per the direction of Engineer in charge
50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.
50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
18.15.1:Providing and fixing brass bib cock of approved quality :15 mm nominal bore
50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall
50.18.9.13.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall
50.18.9.20.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow
50.18.9.20.3:Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Door Elbow
50.18.9.20.5:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes including jointing with PVC solvent cement - 63x63x63 mm dia Tee
V.RATHEESH (BID ID -2429328)
P.T.MICHAEL (BID ID -2428883)
Bidder Name
P.T.MICHAEL
Ameer thaha
V.RATHEESH
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1369004.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
NIT27.pdf
Tender Documents • 0.03 MB
SBD27.pdf
Tender Documents • 1.63 MB
Epay.pdf
Other Document • 0.10 MB
PA.pdf
Other Document • 0.24 MB
bis.pdf
Additional Documents • 0.56 MB
affidavit.pdf
Other Document • 0.03 MB
Circular.pdf
Additional Documents • 20.04 MB
BOQ_1369004.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
