Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.6 LAccepted-AOC RP IV 23 PUNNAKADAVU JN RAMANTHALI P O KANNUR 670308 | KANNUR | KANNUR | KERALA | 670308 | L1 | Accepted-AOC Being lowest. | |
| 2 | L2₹34.2 L+₹3.5 L (11.3%)Rejected-Finance | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹40.9 L+₹10.1 L (33.0%)Rejected-Finance DOOR NO 3 79 CHENNNADGRAMAPANCHAYAT PERUMBALA KASARAGOD 681317 | PERUMBALA | KASARAGOD | KERALA | 681317 | L3 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
22 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(MAINT)EZHIMALA
GARRISON ENGINEER (MAINT) MILITARY ENGINEER SERVICES INDIAN NAVAL ACADEMY POST KANNUR DIST KERALA 670 310
AS PER BOQ AND TENDER DOCUMENTS
2022_MES_548190_1
GE MAINT EZHIMALA 8507
Open Tender
Civil Works
Item Rate
90 days
EZHIMALA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MAINT EZHIMALA
₹98,000
Yes
18 Nov 2022
27 Aug 2022
24 Sept 2022
27 Aug 2022
22 Sept 2022
10 Sept 2022
29 Aug 2022 - 5 Sept 2022
Amount
Notes:- Contractor need to do kerb stone painting/ crash barriers painting by mechanical methods. Contractor need to ensure the safety of labours working at heights by taking insurance policy, providing safety belts and helmets etc all as per safety norms. Contractor need to remove all debris presents at site without any delay to the dumping yards shown by department anywhere inside INA Ezhimala area. Contractor need to understand the importance of POP and should employ sufficient labours to meet the requirements.
M&L for preparation of old decorated surfaces and applying one coat of acrylic emulsion (interior grade) on wall including necessary scaffoldings complete all as specified and as per manufacturers instructions and as directed.
M&L for preparation of old treated surfaces and applying one coat of acrylic emulsion (exterior grade) antifungal paint on wall including necessary scaffoldings complete all as specified and as per manufacturers instructions and as directed.
M&L for preparation of old decorated surfaces and applying one coat of sandtex matt finish on wall including necessary scaffoldings complete all as specified and as per manufacturers instructions and as directed.
M&L for preparation of old decorated surfaces and applying one coat of acrylic emulsion (interior grade) on ceiling including necessary scaffoldings complete all as specified and as per manufacturers instructions.
M&L for preparation of old decorated surfaces and applying one coat of white wash on ceiling including necessary scaffoldings complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description including rafter ,purlins etc (up to a height of 9 mtr) over 10 cm width or girth and applying one coat of epoxy paint including necessary scaffoldings complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description including rafter ,purlins etc..(up to a height of 9 mtr) over 10 cm width or girth and applying one coat of synthetic enamel paint on steel surfaces including necessary scaffoldings complete all as specified and as directed.
M&L for preparation of old plastered surfaces by using water jet washer and applying one coat of acrylic emulsion paint (exterior grade) on surfaces of parapet wall/ kerb stone guard wall etc by using mechanical sprayer to paint complete all as specified and as directed.
M&L for complete removal of existing treatment and preperation of surface by water jet washer and applying two coats of synthetic enamel paint on surfaces of parapet wall / kerb stone over and including priming paints plaster coat etc. by using mechanical sprayer to paint complete all as specified and as directed.
M&L for preparation of old plastered surfaces by using water jet washer and applying one coat of synthetic enamel paint on surfaces of wall / kerb stone over and including priming paint plaster coat etc. by using mechanical sprayer to paint complete all as specified and as directed.
All as per item No.11 above but two coats of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old treated wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for washing, rubbing down and stopping of painted surfaces and applying two coats of antifungal paint using UNIGLOSS delux multisurface paint system or equivalent including necessary scaffolding complete all as specified and directed and as per manufacture's instructions.
Grinding & polishing (Mirror finish) to existing stone topping (Kota, Marble etc..) of any description at floors or in surfaces with electric grinding machine & hand grinding machine complete all as specified and as directed.
M&L for painting lines, dashes, arrows, letters etc on road, pavement and the like not exceeding 10 cm and 2.0 mm thick using hot thermoplastic road marking paint for centre line and pedestrain crossing mixed with reflectorising glass beads at 250grams/Sqm all as specified on finished road surfaces in molten state using suitable mechanical sprayer complete all as specified and as directed by Engineer in charge.
M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, floors, pillars, window cills, cooking platforms and the like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.
M&L for preperation of old painted surfaces n.exc 10cm width or girth and applying one coat of synthetic enamel paint on steel/iron surfaces including rafter, purlines (upto 9 mtr height) and sign board post etc complete all as specified and directed by Engr-in-Charge.
M&L for one coat of synthetic enamel paint on wall of any description to match with existing colour including preparation of old surfaces complete all as specified and as directed.
M&L for complete removal of existing treatment from the surface of any description over 10cm in width or girth and applying wood filler liquid transparent and two coats of synthetic varnish complete all as specified and as directed.
M&L for preperation of old treated surfaces of floor and applying one coat of terracota paint on floor/wall surfaces complete all as specified and as directed.
M&L for PCC precast block 1:2:4 type B1 using 20 mm aggregare as in kerbstones complete all as specified and as directed.
M&L for cement concrete machine pressed chequerred tiles of size 300 x 300 x 20mm thick square in shape of approved tint, as in ramp/stair laid over 20mm thick screed bed in CM 1:4 and pigment to match the colour of tiles complete all as specified and as directed.
Demolition of laterite stone pitching/ masonry / PCC block / PCC of any description, built in cement mortar incl all quoins, arches, pillars etc but excl ashlars facings, dressed stonework & precast concrete articles complete all as specified and as directed.
M&L for laterite stone pitching/ masonry of squared rubble, regular coursed, well bonded, bedded and solidly hearted, jointed and pointed in cement mortar 1:6 complete all as specified and as directed.
M&L for moorum filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
M&L for premix bitumen/ readymix bitumen filled in potholes or unlevelled road surfaces after cleaning the surface thoroughly using broom, gunny bags etc. The bitumen surface shall be levelled and matched with adjacent road surfaces and should be tamped and consolidated with manual / mechanical methods complete all as specified and as directed.
M&L for complete removal of existing treatement and applying two coats of exterior emulsion weather proof Anti-fungal paint over a coat of exterior primer including necessary scaffolding complete all as specified and as directed.
M&L for preparation of old treated MP roof tile surfaces by cleaning with by wire brushes to remove all existing fungal growth etc and applying one coat of antifungal paint using UNIGLOSS deluxe multi surface paint or equivalent including necessary scaffolding complete all as specified and as directed and as per manufacture's instructions.
M&L for roof tiles mangalore pattern interlocking at side joints, laid dry including dismantling Mangloor pattern roofing tiles with ceiling tiles or slate roofing complete all as specified and as directed.
M&L for preparation of new MP roof tile surfaces by cleaning the tiles and applying two coats of antifungal paint using UNIGLOSS deluxe multi surface paint or equivalent over a coat of primer complete all as specified and as directed.
M&L for preparation of old surfaces of aluminium electroplated handrails and applying one coat of epoxy paint using spray guns complete all as specified and as directed by Engineer-in- Charge.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or in mortar complete all as specified and as directed.
M&L for stone grit to cushion bed below interlocking paver blocks complete all as specified and directed by Engineer in charge.
M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified and as directed.
All as per item No.35 above but except tiles complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screed bed 20mm thick in CM 1:6 complete all as specified and as directed.
M&L for providing precast cement concrete of PCC 1:2:4 (20 mm graded stone agg) in window or door cills, lintels, bressumers, steps, kerbs, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones etc set in CM 1:4 complete all as specified and directed by Engineer-in-charge.
Dismantling and cleaning for refixing of sadarahally stone cladding fixed with clamps including necessary scaffolding/boomlift arrangement of appropriate design upto a height of 30 metres from finish/average ground level complete all as specified and as directed.
S&F 20 to 25 mm flame finished sadarahally machine cut stone cladding laid dry fixed with stainless steel clamp and anchor fasteners and headless bolts on vertical surface of wall and column by the following method:- a) Make suitable depression (approx. 5mm width and 25 mm depth on vertical face of stone to fix the clamp) b) Make suitable drill hole to the surface of stone and wall/column to fix anchor fasteners. c) Make good the surface of drilled portion (where headless bolts are inserted) using universal surface filler (supertak or equivalent). Note:- Supply only Hilti make anchor fasteners and clamps and headless bolts shall be measured and paid separately.
All as per item No 40 above but except sadarahally stone complete all as specified and as directed.
Supply only hilti make stainless steel anchor fastner- 10 x 80mm and stainless steel clamp 5 x 50 mm for fixing of sadrahally stone cladding complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting / galvalume sheets, any gauge, thickness as in roof covering work complete all as specified and as directed.
M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.
M&L for 12mm thick plywood, grade BWP, type BB fixed with screws to aluminium frame work / wall etc with 3mm thick decorative face veneer of surface finish, colour and pattern as approved, fixed with approved adhesive complete as per manufacturer's instructions and all as directed by Engineer-in-Charge.
M&L for providing polyester foil coated aluminium alloy (metal planks) for false ceiling in repair complete as per manufacturers instructions and all as specified.
All as per item ser No. 47 above but fixing only complete all as specified and as directed.
M&L for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.
S&F anodised aluminium snap grid frame work for false ceiling size of grid 605 x 605mm complete all as specified and as directed.
M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for 100 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded granite stone aggregate) as in hard standing make impressions while concrete is green complete all as specified and as directed.
LAKSHMI BUILDERS
KDR CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .