Civil and Interior furnishing work at Kasaragod Main Branch

Fabricating and erecting suspended ceiling from the structural soffit using 12mm Gypsum Board and making light openings, Using 16g GI sections (ceiling channels MF.5 80mm x26 mm x 5mm @457mm c/c and intermediate channels MF.7 15mmx 45mm x 0.9 mm @1220 mm c/c and perimeter channels MF .6A 20mm x 26mm along wall and strap hanger–MF.8) No quantity is measured in running meter, including cost and conveyance of all materials labour charges etc. complete.

Provide Main door 120cm wide- single shutter using toughened glass 12 mm thick. Fixed with all hard wares- patch fittings, floor springs (BTS 75)S .S 304-H-handle (18” Mat finish), Center locks, stoppers. An etching sticker should be provided as specified. Including cost and conveyance of all materials labour charges etc. complete

Provide doors for a 90cm-wide cabin-single shutter using toughened glass 12 mm thick. Fixed with all hard wares- patch fittings, floor springs (Aido X L C)S .S 304- H- handle (18”. Mat finish,),center lockes, stoppers. An etching sticker should be provided as specified. Including cost and conveyance of all materials labour charges etc. complete

Providing fully glazed partition using 12mm, TOUGHENED glass for interior area fixed to open plywood beams/partition on the false ceiling, and to the floor in Stainless steel "D" bracket/plywood frame. Measurements are taken for the glass area only. An etching sticker should be provided for the glass area as per the direction of the architect. Including cost and conveyance of all materials labour charges etc. complete

Providing partition wall and glass frame 80mm/100mm thick using plywood of thickness 12 mm double layer, with a plywood core.Finished with 1mm white or theme lamination on both sides. No quantity is measured in running meter and Quantity is measured only for partitions below the false ceiling.Including cost and conveyance of all materials labour charges etc. complete.

Supplying and fixing flush doors with 32mm block board and 6mm glass as per design and specification finished with 1.00 mm lamination on both sides,width of the door 75cm/90cm. Use ISI. S.S 304 hardware fittings including locks, handles, hinges, stoppers, door closer, etc. Including cost and conveyance of all materials labour charges etc. complete.

Supplying and fixing Sliding doors with 32mm block board and 6mm glass as per design and specification finished with 1.00 mm lamination on both sides,width of the door 75cm/90cm.Use ISI. S.S 304 hardware fittings including locks, handles, hinges, stoppers, sliding systems, etc . including cost and conveyance of all materials labour charges, etc. complete.

Supplying and fixing Aluminium framed (1 1/2 X 2 1/2,1.5mm thick) folding door using double side 4mm ACP sheet for strong room up to the ceiling as per the direction from the consultant.including cost and conveyance of all materials labour charges etc. complete.

Supplying and fixing Aluminium framed (1 1/2 X 2 1/2,1.5mm thick ) 5 mm pinned/plain glass for window/ventilators as per the direction from the consultant. including cost and conveyance of all materials labour charges etc. complete.