PROVN OF SECURITY FENCING AROUND KALA GROUND AT CLEMENT TOWN, DEHRADUN

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M & L for cement concrete (1:3:6) type C2 using (40mm graded crushed stone aggregate) as in foundation filling mass concerete etc complete all as specified and directed.

S & F of mild steel work as in post and struts for fencing, hand rail, half round or other stock section or core for fixing of wooden hand rails, bluster, running bars, nosing steps,wind ties, flat iron fillets and the like including necessary cutting, drilling holes, notching etc. as required conforming to Fe-290 Grade E-165 complete all as specified and directed.

M & L for mild steel Screw Bolts (Machine Made) with Hexagonal or Square Heads not exc 5cm long, 11 to 15mm neck with 2 washers and Nut complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over,cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Fixing only chain link fencing, any mesh , size and type to standards, rails, straining bolts , etc including provision of binding wire complete all as specified and directed.

Supply only chain link MS galvanised fencing size of mesh 50X50mm and 3.8mm dia of wire complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F concertina coil with punched tape 600mm dia with wire diameter 2.6mm with razor size 15mm x12mm x 0.5mm , spacing of blade 26mm, fixed on angle iron frames over RCC or brick post/ wall including securing or tying at crossing with and provision of galvanised mild steel wire, staple or steel pins etc complete all as specified and directed. The razor tape should have minimum galvanised coating thickness 12 microns (both side inclusive). The concertina coil should have as per relevant IS and should be hot dip galvanised coated with CLR anticorrosive paint by making diamond shape with the help of dove tail clips (18 SWG) fixed over razor wire with the help of hug ringes (14SWG) complete all as specified and directed.

S&F MS work as in doors or gates, windows, ventilators of angle/rectangular or square hollow section or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors, windows, ventilators etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, window, ventilator fittings and hanging, also fastening and fixing conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and directed.

M&L for M.S.work as in post/struts ,framed bracket etc. Ysection fabricated and welded to existing posts at site in position complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n exc 1.5 m depth in any type soil for foundation etc or for shafts, wells,cesspits ,manholes ,pierholes etc and getting out complete all as specified and directed.

Returning fillings in any type of soil inc spreading levelling watering and well ramming in layers complete all as specified and directed.

Removing excavated material (soil) to a distance n.exc 50 m and depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified and directed.

M&L PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundation ,filling and mass concrete complete all as specified and directed.

M&L for use & waste form work as in foundation ,footing,base of columns and plinth beam and similar work ,for surface fair finished concrete surface complete all as specified and directed.

M&L for use & waste form work as in side of pillars ,posts, sturts ,pier,column and similar work for fair finished concrete surface complete all as specified and directed.

M&L RCC (1:1 1/2: 3) type A1 using 20 mm graded crushed stone aggregates as in foundation including rafts ,footings,foundation ,beams bases for column etc basements slabs, under reamed piles and mass concrete complete all as specified and directed. (Note : Reinforcement will be measured and paid seperately).

M&L RCC (1:1 1/2: 3) type A1 using 20 mm graded crushed stone aggregates as in column ,pillars ,post and struts concrete complete all as specified and directed. (Note : Reinforcement will be measured and paid seperately).

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

M&L for 15mm thick plaster in CM (1:4) on fair face of brick walls finished fair and even without using extra cement complete all as specified and directed.

M&L for preparing new wall surfaces ,chalk whitening on plastered surface and applying 2 coats of cement base paint of any shade walls surface complete all as specified and directed.

M&L 16 to 18 mm thick granite stone of approved quality including 15 mm thick screed bed in CM (1:4) complete all as specified and directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

M/S Manmohan Singh Anand

M/s RAM RATAN AND SONS

MOHAN LAL GUPTA

IRFANAHMAD CONTRACTOR

High Tech Metal India

P K ASSOCIATES

M/S VIJAY TRADERS