Shifting of 33KV and 11 KV lines

Amount

Annexure-A (LABOUR CHARGES)

Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod to proper depth and connecting the earth electrod with the help of G.I. wire as per construction manual.

Fabrication of MS Channel angle iron etc in required sizes with drilling of holes upto good finish for top channel ,bracing and spec ial type bracket etc. as per RESPO schedule and local approced drawing.

Fixing,tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in 11 KV Line

Fixing,tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in 33 KV line

Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand ) block includ ing cost of Cement,sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO Manual.

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all types of soil including proper dressing of sides and ramming of bottom including etting out the excavated soil and disposal of surplus excavated soil as directed complete work

Erection of SP-55 single support pole in proper level and alignment along with fixing of all accessories like top channel,& clamps a s per RESPO manual

Erection of SP-72 single support pole in proper level and alignment along with fixing of all accessories like top channel,& clamps a s per RESPO manual

Erection of Sp-55 double support pole in proper level and alignment along with fixing of all accessories like top channel,X bracings ,& clamps as per RESPO manual

Erection of SP-72 double support pole in proper level and alignment along with fixing of all accessories like top channel,X bracings ,& clamps as per RESPO manual

Erection of SP-72(11KV/33 KV)four pole support pole in proper level and alignment along with fixing of all accessories like top channel,X bracings,& clamps as per RESPO manual

Muffing of poles size 0.45x0.60 cm radius with 1:3:6(1 cement:3 coarse sand :graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement,stone and sand etc.

Dismantling of existing LT/HT line. including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(PCC Single Pole)

Dismantling of existing LT/HT line. including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(SP-55 Single Pole)

Dismantling of existing HT line. including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(ACSR Weasel)

Painting of SP-72 pole with angle and channel and all steel part by one coat of Red Oxide Primer and two coats of aluminium Paint and two strip of fluorescent altemate Red and White paint 30 Cm wide upto 1.5 Mtrs. From ground level.

Digging of trench of size 0.60x0.15 x 1.5 mtr. and laying of underground 33 KV XLPE cable with making of brick housing and filling of sand including filling of earth with ramming. & repairing of road including cost of cement sand and stone blast

Jointing and fixing of cable jointing kit indoor/outdoor 33 KV XLPE heat shrinkable cable boxes

Cartage of ST pole SP-55 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Di stance 21-50 Km)

Cartage of ST pole SP-72 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Di stance 21-50 Km)

Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends(distance 21-50 Km)

Headload cartage of SP-55 Pole from road to site(distance 0-1 Km)

Headload cartage of SP-72 Pole from road to site(distance 0-1 Km)

Head load cartage of small material(distance 0-1 Km)

Dismantling of 33 kv line(panther/dog)

Back Cartage of Petty Material, 0-20 KM

Fixing of 33 KV 90 KN Tension Clamp with Bail and IPC

Fixing of 33 KV Suspension Ties.

Fixing of 33 KV IPC for CC to CC Conductor.

Fixing of 33 KV IPC for CC to Bare Conductor.

Fixing of 11 KV 90 KN Tension Clamp with Bail and IPC

Fixing of 11 KV Suspension Ties.

Fixing of 11 KV IPC for CC to CC Conductor.

Fixing of 11 KV IPC for CC to Bare Conductor.

Laying Spreading and Sagging of Covered Conductor for 11 KV.

Laying Spreading and Sagging of Covered Conductor for 33 KV.

Annexure-B (SUPPLY ITEMS)

Supply of 11 Mtr Long STP 410 SP-55 (BPHD GAL)

Supply of STP 13.0 M-IS 410 SP-72 (BPHD GAL.)

Supply of MS ANGLE 65X65X6 mm

Supply of MS CHANNEL 100X50 mm

Supply of MS CHANNEL 125X65 mm

Supply of 11 KV Polymer Disc Insulator (B&S) Type

Supply of 33 KV Polymer Disc Insulator (B&S) Type

Supply of 11 KV Polymer Pin Insulator with Pin

Supply of 33kV 10KN Polymer Pin Insulator with Pin

Supply of DISC FIT. B&S TYPE DOG/RACOON 70 KN

Supply of EARTHING ROD MS 20X2500mm

Supply of GI WIRE 5mm/6 SWG

Supply of STAY SET GI 20X1800mm

Supply of STAY WIRE GI 7/3.15mm 7/10SWG

Supply of CABLE AL 3X400 SQ. mm XLPE 33 kV

Supply of J/KIT FOR 3X400mm²33kV XLPE CABLE (O/D)

Supply of MS NUT & BOLT OFF SIZE

Supply of Bracing Clamp for SP-72

Supply of Holding Clamp for ST Pole SP-72 with N/B

Supply of PP & CLAMP with N/B for ST POLE SP-72

Supply of STAY CLAMP FOR SP-72 with N/B

Supply of 33 KV 90KN Tension Clamp with Ball & IPC

Supply of 33 KV Suspension Ties on Every Pin Insulator.

Supply of 33KV IPC for CC to CC Conn. in every sec.

Supply of 33KV IPC for CC to Bare Conn. Both end.

Supply of 11 KV CABLE TIES FOR PIN INSULATOR

Supply of 11 KV IPC FOR COVERED TO COVERED COND.

Supply of 11 KV IPC FOR COVERED TO BARE CONDUCTOR

Supply of 11KV AAAC COVERED COND. AL-59, 99 SQ.MM.

Supply of 33KV AAAC COVERED COND. AL-59, 241 SQ.MM.

Supply of 11 KV TENSION CLAMP WITH BAIL & IPC

TARANG TECHNICAL SERVICES

Saun Engineering and Construction Co P Ltd