Providing and fixing anodized aluminum partition at Narmada Colony Limbdi. (Third Attempt)

BILL OF QUANTITIES

BILL OF QUANTITIES

1. The bill of Quantities shall be read in conjunction with the Instructions to Bidder,

Conditions of Contract, Technical Specifications and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional, and are

given to provide a common basis for bidding. The basis of payment will be the actual

quantities of work ordered and carried out, as measured by the Contractor and verified

by the Engineer and valued at the rates and prices tendered in the priced Bill of

Quantities, where applicable, and otherwise at such rates and prices as the Engineer

may fix within the terms of the Contract.

3. The rates and prices tendered in the priced Bill of Quantities shall, except in so far as it

is otherwise provided under the Contract, include all constructional plant, layout,

supervision, materials, erection, maintenance, insurance, profit, taxes and duties,

together with all general risks, liabilities and obligations set out or implied in the

4. The rates and prices shall be quoted entirely in Indian Currency.

5. A rate or prices shall be entered against each item in the Bill Quantities, whether

quantities are stated or not. The cost of Items against which Contractor has failed to

enter a rate or price shall be deemed to be covered by other rates and prices entered in

the Bill of Quantities (in case of Item rate contract).

6. The whole cost of complying with the provisions of the Contract shall be included in

the items provided in the priced Bill of Quantities, and where no Items are provided

the cost shall be deemed to be distributed among the rates and prices entered for the

related items of Work.

7. General direction and descriptions of work and materials are not necessarily repeated

or summarized in the Bill of Quantities. References to the relevant sections of the

contract documentation shall be made before entering rates or prices against each item

in the Bill of Quantities.

8. The method of completed work of payment shall be in accordance with the

specification for canal work.

9. Errors will be corrected by the Employer for any arithmetic errors pursuant to Clause

29 of the Instructions to Bidder.

10. Rock is defined as all materials which, in the opinion of the Engineer, required

blasting, or the use of metal wedges and sledgehammers, or the use of compressed air

drilling for its removal, and which cannot be extracted by ripping with a tractor of at

least 150 kw with a single rear mounted heavy duty ripper.

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr.)

Name of Work : Providing and fixing anodized aluminum partition at Narmada Colony Limbdi.

Qty. Description of Item Unit Rate in Rs. Amount in Rs.

236.80 Providing and fixing anodized aluminum partition Sqmt 1990.00

of heavy fabricated from extended aluminum section

of 63.5mm x 37 mm x 1.20 mm confirmong of grade

I.S.733 having anodized fixtures & fastening

including both side laminated Bhutan board (18 mm

27.72 Providing and fixing in position anodized aluminium Sqmt 5362.00

sliding/ openable Door of heavy type fabricated

from extended aluminium section of 20 mm

confirming of grade I.S.733 having anodized fixtures

and fastening with two track pipe frames all round (

I/We am/are willing to carry out the work at… ............................... % above/below percent (Should

be written in figures and words) of the estimated rate mentioned above. Amount of my /our tender works

Estimated amount put to tender Estimated amount put to tender

Deduct………%below Add………%Above

In words In words

(B) For Item Rate Tender (ForaboveINR50Cr.):

Item Description of Item(with Quantity Unit Rate Amount

No brief specification and

reference to book of In In

specifications) figures Words

(A)Total Tendered Amount

(B)Rebate on above tendered amount(ifany) % (in figure) ………………………………

(C)Net Tendered Amount(A-B) (in figure) ………………………………

1 The Contractor shall exhibit aboard with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per vernacular

office letter no. 04 of 2024, Dt. 20/01/2024 of The Chief Engineer, Quality Control (SSNNL) as stated

in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of

difference of cement consumption have been deducted from the rate of original item at the rate of

input rate (i.e. 5234 Rs / MT) mentioned in all the tender