SPL REPAIR REPLACEMENT OF FILTRATION PLANT OF SWIMMING POOL EM FITTING AND FIXTURES OF BLDG NO P 583 P 368 AND P 344 AND CERTAIN REV MINOR WORKS AT MIL STN DHRANGADHRA

Amount

Excavation in post holes(or similar holes) each n exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface as in hard dense soils(PCC bed blocks in GL or above) complete all as specified and directed.

M&L for PCC 1:2:4 type B2 using 40mm graded stone agreegate as in bed blocks complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM (1:6) completed as specified and directed.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n. exc 20mm for sand stone and dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses completed as specified and directed.

M& L for cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in coping, including necessary formwork etc complete all as specified and directed.

M&L for rendering 15mm thick cement plaster 1:4 on stone masonry surface or surface other than fair face of brickwork surface finished even and smooth without using extra cement complete all as sepcified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

S&F mild steel rolled section Fe-410-W(Gde E-250), quality 'A' as in post, main and cross beams, rafters, purlins connected to common rafters fixed with angle iron clips or other connecting plates complete all as specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding wall, fixed with self tapping screws complete all as specified and directed.

Supply, installation, testing and commissioning of Bobbin Wound FRP (filtration plant) Sand Filter Fiberglass winding design enables the filter fot swimming pool size 22mx9mx1.5 to 3m depth and avg dep 2.25 mtr to be durable, Unique & advanced design ensures fast draining and stabilizes water flow ,anti- corrosive internal Gelcoat resistant to even salt water. The six position Multiport Valve for back wash, rinse, filter, waste, closed fermeand recirculate system etc. with a user freindly handle, easily provides a maximam flow at low pressure drop Working pressure- 2 kg cm²/36 psi. including PCC foundation complete all as specified and directed. Filter Dia: 1000 mm, Cross Sectional Area: 0.78 M², Filter Flow Rate: 31.00 M³/ Hr. Note : (i) The filteration plant tank size shall be as per pool capacity. The above tank capacity is given approximate. The PCC foundation is deemed in the quoted rate. Make : ION Exchange or equivalent make as approved by GE.

Supply and filling of Filter media Silica Sand/White Selex quartz fine media 0.4 and 0.8mm and 1mm to 2mm with the Uc value less than 4 to promote movement of water and prevent clogging as required for swimming pool filtration complete as per OEM recommended. Make : ION Exchange or equivalent make as approved by GE.

Supply, installation, testing and commissioning of centrifugal pump set mounted on base frame, electric driven, 3 phas, 4 wire, 50 cycle, 415 volts, discharge 62.00 M³/ Hr, head 12 mtr direct coupled including cast iron impeller anty vibration pads, suitable size suction and discharge pipes, pressure gauge including suitable base frame PCC foundation and starter panel and all accessories as recommanded by manufacture complete all as specified and directed as per make of Kirloskar/Jyoti/Crompton/Becon or equivalent make as approved by GE. (1 working + 1 stand by)

Supply, installation, testing and commissioning of Chlorine dosing pump and pH correction system including metering pump with fittings with chemical holding tank including supply with the following accessories as standard : (a) One level switch & suction fitter fitted on pump suction assembly. (b) One length of tubing for pump discharge. (c) One Dosing valve (for installation at the point of dosage to create back pressure). (d) Dosing tank 100 Ltr with level indicator, Flow: 6 LPH

S&F, Cast Iron Butterfly valve with PVC flanges suitable for 80 mm bore incl nut & bolts all complete all as specified and directed.

S&F, Non return valve) of Class PN 1.0 for 80mm bore, cast iron body (AISI 316), with PVC flanges, disc, trim and spring & nut & bolts all complete all as specified and directed.

Supply, installation, testing and commissioning of pool cleaner (suction sweeper) with vaccum head with trolly system with Vaccum head and non clog self priming pumpof capacity of 5 HP complete all as specified and directed with accessaries (i) Extended Telescopic pole -4.8 mt in Aluminium body (ii) Algae Brush - 10 Inch SS Bristles (iii) Curved brush - 18 Inch with aluminium handle (iv) Leaf skimmer -with aluminium handle (v) Test set P.H. Test Set, Chlorine Test set (vi) suitable iron angle trolly along with movable wheel and handle and vibration pads -04 Nos (vii) Non clog self priming pump set of capacity 5 HP along with starter (viii) painting of complete trolly after two coat of primer red oxide paint

S&F, PVC insulated copper conductor unarmoured cable of size 2.5 Sqmm of 4 core incl testing complete all as specified and directed.

S&F, PVC insulated copper conductor unarmoured cable of size 6 Sqmm of 4 core incl testing complete all as specified and directed.

S&F, 90 mm dia UPVC pipes conforming to IS : 4985 : 1988 and suitable for the respective working pressures with all fittings and specials, e.g. couplings, tees, bends, reducers, bushes, male & female threaded adopters, screwed adaptors, flanged tail pieces, etc., jointing with solvent cement joints including testing complete all as specified and directed. Make : Finolex/Supreme/Prince or equivalent make as approved by GE.

S&F, 63 mm dia UPVC pipes conforming to IS : 4985 : 1988 and suitable for the respective working pressures with all fittings and specials, e.g. couplings, tees, bends, reducers, bushes, male & female threaded adopters, screwed adaptors, flanged tail pieces, etc., jointing with solvent cement joints including testing complete all as specified and directed. Make : Finolex/Supreme/Prince or equivalent make as approved by GE.

Taking down carefully unserviceable copper/aluminium point wiring (Light, fan, socket or power) complete including unserviceable fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets, lamp holders, brackets, except ceiling fittings, bulk head fittings, tube light fittings etc. and making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for wiring with and including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. complete all as specified and directed for the following :- Make of Cable Polycab/Finolex/Havells

(a) One light/fan point controlled by one switch

(b) One 3 pin, 5 Amps, socket outlet on the same board controlled by another switch.

(c) One 3 pin socket outlet, 5 Amps, independent board

S&F, ceiling rose, 3 terminal , any shade, of PVC/Polycarbonate, isolated body complete all as specified and directed

S&F, switch piano, flush button, single pole, one way, 5 Amps complete all as specified and directed

S&F, Socket outlet 3 pin, 6A, 2-in1, flush type, 230 V complete all as specified and directed.

S&F, LED compact fitting/batten for single tube of 1 x 20W, 220V, AC decorative box type, 4ft with integral LED driver (double side connection) complete all as specified and directed as per Cat No. STREAKT8UPTO1X22WSSBSWH of Havells or equivalent as approved by GE.

S&F, ultrabright LED tube light rod with very high efficacy of 10W T8, 220V, double side connection complete all as specified and directed as per Cat No. CRYSTALT81213DSTL18WLED865SGLASS of Havells or equivalent make as approved by Ge.

S&F, sub-main wiring with 2 single core, 1.5 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper multi stranded conductor drawn in and including PVC casing and caping of 32mm size including drawing one run of PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper conductor multi stranded, 1.5 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed. Note: 2 runs of main conductor, one run of earth conductor and one run of PVC casing and caping shall be measured as one unit length. Make of Cable Polycab/Finolex/Havells

Taking down carefully old unserviceable main switches/Distribution board any type including fuses MCB etc after removing all connection, wires and making good the disturbed surface complete all as specified and directed.

S&F, sheet metal distribution board, SPN, 8 way 240 Volt, double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A bus bar complete all as specified and directed

S&F, MCB, SPN 6-32 Amps, 240V, 10 KA complete all as specified and directed.

S&F, MCB, TPN 32 Amps, 415V, 10 KA complete all as specified and directed.

S&F 45W New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 for bldg security light with GI pipe bracket of suitable size for fitting complete all as specified and directed by Engineer-in-charge. Make : Havells/Bajaj/Philips/Crompton

S&F, Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe of size 4mm dia galvanised iron complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth Lead 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to earth test point using earth strip of 25x4mm as earth lead all as specified and testing on completion including provision of earth lead protected by 40 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions:-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 40 mm bore light grade 7.5m.

S&F, Wall Mounting fan 400 mm sweep, 3 blade , single phase, 230 volts, 50 Hz AC supply including provision of suitable bolts, nuts, washers and grouting on walls and making good the disturbed surfaces to match with the existing sufaces complete all as specified and directed. Make - Havells, Philips or equivalent Bajaj

Cutting holes into or through concrete walls built in cement mortar of superficial area exec 400 sq.cm but n.exc 0.10 sq.m to a depth of 30cm including provision of suitable bolts, nuts, washers and grouting on walls and making good the disturbed surfaces to match with the existing sufaces including making good and rubbish off the premises providing Nut bolt for hangig of Exhast fan complete all as specified and directed.

S&F of Exhaust fan 300 mm Sweep , Metal body, alongwith louvers Metallic Grey coloure complete suitable to work on AC, single phase, 230 Volts, 50 Hz supply Complete with blade all duly connecting and testing complete all as spcified and directed. Make : BAJAJ / HAVEELS /USHA

SNEH TRADERS