CERTAIN REPAIR TO SUB STATION BUILDINGS INCLUDING CONVERSATION INTO SHED AT 3 BRD AF CHANDIGARH UNDER GE (AF) MC CHANDIGARH

Amount

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete brick work, masonry etc an making good disturbed ground for complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi-corrugated, etc) sheets in roof coverings/wall cladding etc. and removing from site complete all as specified and directed.

S&F Pre painted Coloured Galvalume roofing system sheet 0.50 mm thick, corrugated sheet having Zinc aluminum alloy coating AZ150 shall be as per IS:277/ASTM 1379 150 gsm/ sqm double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Supply and fixing mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of grade Fe 410 -W (Gde- E- 250) quality- A , complete all as specified and directed.

Excavating in post holes in Soft/loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M & L for preparation of new steel surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for preparation old steel surface of any description over 10 cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Taking down existing bitumen felt including cement mortar bedding including padding and cleaning the surface and removal of unserviceable material out side MoD land upto distance exceeding 1.5Km but n.exc 2Km, complete all as specified and directed.

M & L for PCC 1:2:4 type B-0 (12.5 mm graded stone agg ) as in padding on roof laid in 50mm thick average required thickness to maintain desired slope, finished even and fair without using extra cement, complete all as specified and directed.

Material and labour for cement concrete (1:2:4) type B-0 using 12.50 mm graded crushed stone aggregate, as in roof kerb, mud stops, benching , including use and waste necessary form work, complete all as specified and directed.

Material and labour for rendering 10mm thick in cement mortar (1:3) using WPC @ 0.200ML per 50Kg bag of cement on surfaces of roof and parapet, finished even & fair without using extra cement, complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Supply only Liquid water proofing compound, complete all as specified and directed.

Material and labour for applying a coat of bitumen primer @ 0.3Kg /sqm conforming to IS : 3384 and laying 3mm thick APP modified water proofing membrane reinforced with non woven polyster matt having softening point not less than 150 degree centigrade, having tensile strength 650 N/Sqcm in longitudinal & 400 N/Sqcm in transverse direction by torch method with min 100 mm side lap and 150 mm end lap followed by application of a coat of hot blown bitumen 85/25 grade @ 1.2 kg per sqm and blinded with clean dry sand @ 0.5Kg/sqm over the APP membrane on roof, complete all as specified and as directed. NOTE: The water proofing treatment shall be carried out by the Authorised applicator of the Manufacturers.

All as per item No 15 above but on vertical surface, complete all as specified and directed

M&L for applying two coats of solar reflective bituminous aluminium paint over APP membrane @ 0.20 Kg/Sqm for two coats complete all as specified and directed.

Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of unserviceable material out side MoD land upto distance exceeding 1.5Km but n.exc 2Km complete all as directed.

M&L for Plain cement concrete Type - D2 (1:4:8) (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M & L for 100 mm thick Plain cement concrete 1:2:4 type B-2 (using 40 mm graded stone agg ) finishing cement concrete surface even and smooth without using extra cement and making joints filling with bitumen sand mastic including necessary form work complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C1 using 40mm graded stone aggregate as in plinth protection complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size, polished confirming to IS-15658 of 80mm thickness M-40 grade, laid over and including sand cushion of 40mm thick including dismantling old paver block and removing outside of MoD land distance exc 1.5Km but n.exc 2.0Km, complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size, polished confirming to IS-15658 of 60mm thickness M-35 grade, laid over and including sand cushion of 40mm thick including dismantling old paver block and removing outside of MoD land distance exc 1.5Km but n.exc 2.0Km, complete all as specified and directed.

Demolition of brick masonry work built in cement mortar including all quoins, arches, pillars, or in any position etc. and removal of rubbish outside MOD land and stacking of useful bricks/brickbats for credit or reuse, complete all as specified and directed

Material and labour, brick work with fly ash bricks straight or curved on plan exceeding 6m mean radius, built in CM (1:4), complete all as specified and directed.

Material and labour for brickwork with using retrieved subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), except bricks, complete all as specified and directed. Note : Old serviceable bricks retrieved from demolition against srl item No 24 here-in-before shall be reused after proper cleaning & washing etc.

M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair face of brick surfaces or concrete surface in cement mortar (1:4) finished even and smooth without using extra cement including taking down cement plaster on brick walls & concrete surfaces of building including racking out joints, hacking for key, scrubbing down with water complete including necessary scaffolding/working platform and removing outside of MoD land distance exc 1.5Km but n.exc 2.0Km complete all as specified and directed.

M&L for rendering 15 mm thick on fair face of brick surfaces or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement including taking down cement plaster on brick walls & concrete surfaces of building including racking out joints, hacking for key, scrubbing down with water complete including necessary scaffolding/working platform and removing outside of MoD land distance exc 1.5Km but n.exc 2.0Km complete all as specified and directed.

M & L for preparation of new plastered/concrete surfaces of walls and applying two coats of exterior acrylic emulsion (weather proof treatement)/Apex over one coat of primer, including a thin layer of wall care putty up to height 15 meter (The tint and shade be as approved by GE) the treatement shall be carried out by the authorised applicator of the firm including necessary scaffolding etc complete all as specified and directed.

M & L for preparation of new plastered/concrete surfaces of wall and applying two coats of white washing over priming plastered and other surfaces with alkali resistant priming paint including necessary scaffolding, ladder etc complete all as specified and directed.

M & L for preparation of old plastered/concrete surfaces of wall and applying two coats of white washing including necessary scaffolding, ladder etc complete all as specified and directed.

M & L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete at any height including necessary scaffolding complete all as specifed and directed

M&L for dismantling loose/disintegrated portion of RCC Chajjas, bends shelves, beams balconies and similar work at any position and any height and dubbing out with PCC (1:1 1/2:3), 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaced and provision of necessary supports form work with and including 10mm thick plastering in CM 1:4 finished even and smooth without using extra cement including preparation of surface to receive finishes etc complete all as specified and directed.

Taking down mild steel rolling shutters of any size and description complete all as specified and directed.

S&F 1.25mm thick steel rolling shutters without ball bearing of push pull or manual type as directed including top cover, anchoring rod, hasp & staple and one coat of primer and two coats of synthetic enamel paint; erected in position as indicated complete all as directed.

M&L for overhauling, servicing and realignment of rolling shutters of area not exc 12 sqm including replacement of defective bearing and grinding of wheels for smooth movement of doors, replacement of clamps, bolts etc including cleaning, oiling and greasing of moveable parts and welding work complete all as directed.

S&F in repair Rotational moulded polythene water storage tank of 2000 Ltrs capacity (three layer white colour) cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal to store complete all as specified and directed.

S & F for 20mm bore Tubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chasing into wall etc complete all as specified and directed.

S & F in repair 20mm stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S & F 160mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 160mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S & F stack clamps made out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 160mm dia rain water pipes complete all as specified and directed.

Taking down chowkhat or frame exc. 1.5 sqm but n.exc 4 sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

S&F for Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, lock strike plate, tarring back of chowkhats & holdfast etc, complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-0 (using 12.5mm graded aggregate) as in back fill of pressed steel frames complete all as specified and directed.

M & L for PCC 1:3:6 type C1 (using 20mm graded aggregate) as in hold fasts complete all as specified and directed..

S&F for 30 mm thick 2nd class hard wood plain, framed Flush shutters ,solid core construction with block boards core and plywood face panels ,commercial type on both sides all) complete all as specified and directed .

S&F 180 mm size Powder coated(any tint) aluminium "American Handle" fixed to wooden/aluminium door with suitable screws complete all as specified and directed.

S&F in repair 180 mm size Powder coated(any tint) aluminium "American Handle" fixed to wooden/aluminium door with suitable screws complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

S&F 100mm size Butt hinges, medium weight, cold rolled mild steel bright finish complete all as specified and directed.

S&F anodised Aluminium sliding door bolts 200mm, plate type, with bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F 200mm aluminium anodised tower bolts of extruded section fixed with screw, complete all as specified and directed.

Hacking out old broken glass (any thickness, size,quality or description) from wooden/aluminium frames glazed with putty or fixed with beads complete all as specified and directed.

M&L for 3mm thick Sheet glass, ordinary quality and glazing with silicon sealant in square n exc 0.5 sq.m in each pane complete complete all as specified and directed.

M&L for repairing any type of aluminum/wooden door shutter/Frame and refixing it after resecuring its framework by means of tightening with new screws/hinges or by aluminium angle cleat, rubber bedding around glass, Locking arrangement and refixing it in the same opening complete all as specified and directed..

M&L for repairing any type of aluminum Window shutter and refixing it after resecuring its framework by means of tightening with new screws/hinges or by aluminium angle cleat and refixing it in the same opening complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over 20 mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes including dismantling and removing outside of MoD land distance exc 1.5Km but n.exc 2.0Km complete all as specified and directed.

All as per item Ser No 63 but in patches and random location/scattered places etc. complete all as directed.

M & L for Cement concrete 25 mm thick 1:2:4 type B-0 (12.5mm graded aggregate) as in floors complete all as specified and directed.

M & L for Grinding & polishing of old kota stone/ marble/ baroda green floor/skirting with machine to mirror finish in and including making good of wall finishes as per original specifications complete all as specified and directed.

M&L for Glazed ceramic coloured tiles 450mm x 300mm x 6mm to 7mm thick as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles including screed bed 10 mm thick for wall finishes in cm 1:4 and including dismantling and removal of rubbish off the premises

Supply and fixing factory made steel window 1.25mm thick box type (primer coated) ERW hollow 'P' section of size 60mmx25mm including grill using 10 mm Square bar double rebated both gauge and glass shutter including aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and 3 mm thick ordinary glass compressed gauged & glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar to T section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick including cutting hole and making good dismantled portion in PCC (1:2:4) type B1 four Nos for each window including following fitting welded to frame shutter : (a) Hold fast, 150mm long of 12mmx3mm made to shape 04 Nos per window (b) handle of z section 20mmx25mm, 100mm long per No leaf (c) MS tower bolt 150mm long 02 Nos per leaf (d) 'Z' section 20mmx25mm, 100mm long stopper 1 No per leaf (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm, 2 Nos per leaf.

Supply and fixing in replacement of reflective sign board of size (5feet x 4feet) made over ACP sheet supported to Stainless steel strips 25x3mm with aluminium rivets. Strips 3mm thick welded to frame of 32 mm round SS pipe of 18 gauge. Frame Supported with SS Strips to a pair of post made out of 50mm SS pipe of 18mm gauge. Post tops to be closed with SS doom ends and post to have bottom plate for firm grip to ground. Matter of the board would be written over both sides with Computer cut Words from overly film laminated to prismatic high reflectivity sheet complete all as directed

Supply and fixing in replacement of reflective sign board of size (4feet x 3feet) made over ACP sheet supported to Stainless steel strips 25x3mm with aluminium rivets. Strips 3mm thick welded to frame of 32 mm round SS pipe of 18 gauge. Frame Supported with SS Strips to a pair of post made out of 50mm SS pipe of 18mm gauge. Post tops to be closed with SS doom ends and post to have bottom plate for firm grip to ground. Matter of the board would be written over both sides with Computer cut Words from overly film laminated to prismatic high reflectivity sheet complete all as directed

Supply and fixing in replacement of reflective sign board of size (3feet x 2feet) made over ACP sheet supported to Stainless steel strips 25x3mm with aluminium rivets. Strips 3mm thick welded to frame of 32 mm round SS pipe of 18 gauge. Frame Supported with SS Strips to a pair of post made out of 50mm SS pipe of 18mm gauge. Post tops to be closed with SS doom ends and post to have bottom plate for firm grip to ground. Matter of the board would be written over both sides with Computer cut Words from overly film laminated to prismatic high reflectivity sheet complete all as directed.

Note:- Amount of credit of Rs. 31425.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

Anil Kumar Gupta

MS FUTEC ENGINEERS

AS Enterprises

shree balaji builders

M/S GOYAL ASSOCIATES

KUMAR AND COMPANY

MOHAMMAD RASHID