CERTAIN PROVN WOKKS AS PROVISION OF 04/06 X TOILETS FOR UNIT LINE AREA OF 440 COY ASC (SUP) TYPE B ,ROVN OF 01X COVERED STORAGE SHED FOR STACKING OF HAY BALED (50X30 ) AT 440 COY ASC LOC AND PROVN OF IRON FRAME/ SHUTTER DOOR FOR 12 X SHEDS IN R

Amount

Schedule 'A'

Surface excavation n.exc (not exceeding) 7.50 cm deep and averaging 15cm deep and getting out complete all as specified and as directed.

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, cable etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and as directed.

M&L PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) for fdn/ mass concrete complete all as specified and as directed.

M&L for RCC Type B-1, M-25 ( Design MIx) (1:1.5:3) (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L for RCC Type B-1, M-25 ( Design MIx) (1:1.5:3) (20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified directed

M&L RCC Type B1 M-25 ( Design MIx) (1:1.5:3) (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L RCC Type B1 M-25 ( Design MIx) (20 mm graded aggregate) in Columns, pillars, piers, posts and struts complete all as specified and directed

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Ditto as above but as in stirrups 6 to 8mm dia

M&F Formwork flat fair finished to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.

M&L Formwork flat fair finished surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

M&L Formwork square, rectangular or plougonal fair finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified.

M&L for Formwork to flat fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landings , shelf and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L for Flyash Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortor 1:6 complete all as specified and as directed .

M& L for Fly ash Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed

M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:4) finished surfaces even and smooth complete all as specified and as directed.

M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:6), finished surfaces even and smooth complete all as specified and as directed.

Rendering 5mm thick with CM (1:3) on or concrete surfaces finished even and smooth as in ceiling complete all as specified and as directed .

M&L for preparing new plastered surfaces of wall with 3 mm wall care putty and applying two coat of distemper oil emulsion over a coat of primer complete all as specified.

M&L for preparation new plaster surfaces of wall and applying two coats of cement base paint complete all as specified and as directed.

M&L preparation of new plaster surface of ceiling and applying two coats of white wash complete all as specified and as directed .

M&L silver sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed .

M&L 100 mm PCC (1:4:8) type D-2 using 40 mm graded stone agg as in sub base complete all as specified and as directed.

M&L for 25 mm cement concrete type B-1 1:2:4 (20 mm graded stone aggregate) as in floor finished complete all as specified and as directed .

M&L for 25mm Damp proof course to horizontal or vertical surfaces in cement concrete type B0 1:2:4 including necessary formwork

M&L for Framed work such as grills, framed guard bars,for window by welding it to existing window frame and similar work con- forming to Fe.290.Gde-E-165

S&F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specifed.

M&L for 75mm PCC 1:3:6 type C-1 using 20 mm graded stone agg as in sub base/ plinth protection complete all as specified and as directed.

S&F of 4 mm thick Sheet glass frosted , ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

M&L for two coat of synthetic enamel paint over a coat of yellow primer including preparation on steel surfaces of any description over 10 cm width or girth complete all as specified and as dircted.

S & F vitreous china wash down water closet wall hang (Pedestal) including PVC seat cover closed pattern with flat bottem and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint to socket or stoper etc.

S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest complete incl provision of lime concrete bedding.

S/F in 10 litres cap PVC low level valve less symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and flushing pipe, complete all as specified and as directed .

S&F Vitreous China wash basin Pedestal pattern, white, flat back size 580x450 mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipeincluding brackets, complete all as specified and as directed .

S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F 15 mm dial PVC connection 450 mm long, complete all as specified and as directed .

S&F waste coupling of PTMT (half of full threaded) 32mm dia complete all as specified and as directed

S&F 32 bore PTMT Wash hand basin waste pipe 90 cm long complete all as specified and as directed .

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified.

S&F 15mm bore Bib taps, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F 15 mm bore Stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms)

M&L for coloured Joint free Glazed ceramic tiles in vertical surface 450x300x75 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in CM (1:3) complete all as specified.

M&L for coloured joint free non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including 15mm thick screed bed in cement mortor 1:6 complete all as specified

M&L for PVC Floor trap 75 mm outlet, plain with grating including joning with solvent cement complete all as specified and as directed .

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

M&L for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

Ditto as above but in wall complete all as specified.

M&L for 110 mm bore PVC (SWR) vent cowl

M&L PVC (SWR) bends with access door of 110mm bore any radius complete all as specified.

S&F 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified.

M & L screed bed or bedding layer 15 mm thick screed bed or bedding layer in CM (1:4) mixed with WPC as per manufacturer instruction for laying of APP membrane complete all as directed .

Supply only intergral water proofing compound (WPC) of best quality

M& L for bituminous primer @ 0.50 KG/Sqm over the cement plaster incl preparation of surfaces as per manufacturers instruction complete all as specified and as directed.

M & L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed.

M & L for finishing the Bituminous surface with aluminium paint @0.15 Ltr/sqm as per manufactures specifications and under strict supervision of manufactuer's technical representative complete in all respects as directed .

Returning filling in including spreading levelling watering and well ramming in layers not exc 25 Cm complete all as specified and as directed.

Removing excavated material exc 1.5 km n.exc 5 KM and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and as directed .

Material & Labour for PCC in 1:3:6 type C1 ( using 20 mm graded stone aggregate) as in surface channel/bed block/hold fast etc including necessary formwork.

Extra for forming fair finished drain 30 cm inner girth

S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed.

All as per item no 63 above but 20 mm bore pipe.

M& L for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

M& L for CP toilet paper holder of any description all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F Stainless steel butt hinges medium weight 100mm long for PVC door.

S&F Aluminium anodized barrel tower bolts, extruded section 200mm long.

S&F Aluminium anodized handles, D type, 150mm long

M&L for PCC for concrete bed to drain pipe , 200 mm bore pipe including packing and under hunching against the sides of pipe after they are laid and tested in PCC (1:3:6) type C-2 using 40 mm graded stone aggreagate complete all as specified and directed.

M&L for 200 mm bore grade 'A' SGSW drain pipe laidin trenches and jointed in cement ,mortar (1:1) complete all as specified.

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm directed .

Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 25 mm dia bore complete with all accessories all as specified and directed .

M& L for cutting existing GI pipe alteration or addition of 40/50 mm dia bore for inerstion of reducer Tee complete with all accessories all as specified and.

M&L for hard core of gauge n.exc 63mm,deposited spread and levelled in layer n exc 15cm thick watered and rammed to a true surface of broken stone boulders. complete all as specified and as directed .

M&L 100 mm thick PCC type B-2 ,1:2:4 (40mm graded stone aggregate as in hard standing, flooring and paving etc finishing the rough for receiving tiles with out using extra cement and finishing the surface with brooming etc including necessary form work complete complete all as specified and directed.

M & L 10mm thick rendering on fair faces of brick work or concrete surface in CM 1:3 for laying wall tiles.

S&F steel work in tubular trusses i.e. Truss bottom, top bend, sides, side supports, holding plates, posts and base plate with bolt for joining with stud column etc including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and as directed.

M&L for flat iron in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets including all necessary drilling, bolting or revetting etc and similar work conforming to Fe-290 Gde E-165.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated stee sheet 0.50mm thick of an olour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

M & L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50nlIn thick of any colour having tensile strength of 550 Mpa as inroof covering/ cladding to wall, fixed with selftapping screws as specified.

M&L for machine pressed, pre-polished and chemically treated, smooth finished, exterior graded coloured cement concrete chequered tiles 30cm x 30 cm x 20-25 mm thick, set, jointed and pointed in neat cement slurry with gray cement and pigment in floors over and including 15mm thick screed bed orbedding layer in cement mortar 1:4 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with M & L for screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes

S & F in of 4mm dia galvanised steel wire, 150x100mm mesh welded steel wire supplied and fixed complete to steel members complete all as specified and as directed.

M& L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M& L for Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required

M&L point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor,conforming to IS-694 of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20/25mm size 'medium grade' PVCPVC Conduit pipe and fittings, including, pressed steel concealed terminal switch boxes not less than 1.2mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed (a) One light point controlled by one way switch 5/6 amps.

(b) One ceiling fan/Exhaust fan point controlled by one way switch 5/6 Amps

S & F switch piano fush type 5/6 Amps single pole one way complete all as specified

S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.

S & F Wall monted slim LED batten 20W, with extruded aluminium housing, with integrated LED Driver and 02 Nos of PVC round/ square blocks for fixing of LED fitting to wall/ any other surface including provision of multistranded copper conductor for connecting up with complete all as specified and directed by Engr-in- charge.

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete including taking down the old one complete all as specified and directed by Engr-in-Charge.

S&F MCB, Single pole & neutral 32 amps, 240 volts, ‘C’ curve, 10 KA all complete the old all as specified and directed by Engr-in-Charge. Charge.

S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA complete all as specified and directed by Engr-in-Charge.

M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete all as specified and directed by Engr-in-Charge.

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 10 sqmm 2 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (Make: Havells/KEI / POLYCAB/RR Kable/Gloster cable) (NOTE: Earthwork & Excavation, GI pipe, bricks for protection etc shall be measured and paid separately under relevant items of this schedule 'A').

Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.

Supply and laying sub class B bricks of size 25cmx12.5cmx7.5cm (+/-10% tolerance) for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.

M/S MOHAN KUMAR BANSAL

SHRI MANOIRANJAN BISWAS

L. B. SHARMA

M/S D S CONSTRUCTION CO

M/S PLABAN KUMAR GOPE