Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.5 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹38.4 L+₹1.8 L (4.96%)Rejected-Finance | L2 | Rejected-Finance Become L2 |
Tender Value
Refer Docs
EMD Value
₹74,600
Closing Date
30 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Tezpur
GE South Tezpur Mission Chariali Tezpur, Assam
ADDN/ALTN OF SECURITY WALL (LENGTH 150 RM AND HEIGHT 2.10 MTRS) AT 155 BH AND PROVN OF CERTAIN SANCTIONED WORKS AT SAA (PHASE-17) UNDER GE (S) TEZPUR
2022_MES_543363_1
8698
Open Tender
Civil Works
Item Rate
210 days
GE South Tezpur
As per NIT
4 documents required · 4 mandatory
₹500
Yes
GE South Tezpur
₹74,600
Yes
18 Oct 2022
4 Aug 2022
1 Sept 2022
4 Aug 2022
30 Aug 2022
17 Aug 2022
Amount
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in loose/soft soil, complete all as specified and as directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc 50m and making good surfaces as in soft/loose soil, complete all as specified and as directed.
Returning , filling in including spreading levelling, watering and well ramming in layers not exc 25 cm thick, complete all as specified and as directed.
Removing excavated material (soil) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as directed.
M & L for PCC 1:4:8 type D2 using 40 mm graded aggregate as in foundation filling and mass concrete, complete all as specified and as directed.
M&L cement concrete 1:2:4 type B2 ( using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement morter 1:6, complete all as specified and as directed.
M&L Brickwork with flyash bricks, straight or curved on plan to any radius i n half brick thick walls, built in cement mortar 1:6, complete all as specified and as directed.
Dismanting timber scantling 40 Sqcm and over in secion in any position in framed work, complete all as specified and as directed.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets Complete all as specified and as directed.
S&F false ceiling with powder coated exposed G.I. grid suspension system Everest E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of Main Runner (3600 mm long, 0.25 mm thick, 38mm height) Cross Tee (1200mm/600mm long, 0.25 mm thick, 27 mm height) and Wall Angle (3000 mm long, 0.4 mm thick, 22 mm height). The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. The Main Runners to be placed @ 1200mm, The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm. Grid of module size 600mm x 600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit. 4 mm thick High Pressure Steam Cured Everest Non Asbestos Fibre Cement Designer Ceiling Board or equivalent quality having Density>1200 Kg/m3, size 595mm x 595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7&8, should be placed in the Grid module to form a False Ceiling, complete all as specified and as directed.
Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts, complete all as specified and as directed.
Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts, complete all as specified and as directed.
S&F standard aluminium powder coated section (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE) frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete shall as specified etc complete all as specified and as directed
S&F standard aluminium powder coated section (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE) for window (sliding three track/two track/fixed or louver type) and ventilator shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing or gaskets for fixing glass, anodised aluminium snap beading, screws, anodised aluminium fittings such as locking arrangement , screws, plugs, handle, lock, roller, Nylon ball bearing etc, complete complete all as specified Note Glass and wire mesh shall be measured and paid separately under respective items, complete all as specified and as directed.
M&L for mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar, barred iron doors, ladder, framed balusters, railing, frame work for water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
M&L Rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410- W(Gde- E-250) quality- B, complete all as specified and as directed.
S&F steel work in tubular truss or post of different size bend to shape, cut to length etc, including necessary welding,special shape washer, conforming to IS:1161-1998 grade St-240 complete as directed by Engineer in Charge.
S&F MS Work as in Angle Iron post for as directed, drilling hloes notching for wire and similar work confirming to Fe-410-0 or Fe 310-0 all as specified and directed.
S&F Galvanised 2 strand steel barbed wire 2.24 mm dia with 2mm dia barbs at 75 mm spacings and straining and fixing to anyh type of standard rails, straining bolts all as specified and directed
Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and as directed.
M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.
M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete, of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.
S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.
Supply and fix 30mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. (Note : Glass / wire cloth wil be measured and paid separately), complete all as specified and as directed.
S&F Solid PVC frame of size 50mm x 47mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc complete all as specified and as directed
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification, complete all as specified and as directed.
S&F 100 mm thick mild steel butt hinges,medium weight and fixed etc complete all as specified and as directed
S&F Aluminium handles, 150 mm size, cast type anodized complete all as specified and directed by Engr-in-Charge. .
S&F Aluminium anodised barrel tower bolts, 200mm long, of extruded section complete all as specified and directed by Engr-in-Charge.
S&F Aluminium alloy anodised sliding door bolts, of 300 mm long with hasp, staple (bolt type) fixing clips of sheet cast or extruded section, fixing bolts and sliding bolts of extruded section complete all as specified and directed by Engr-in-Charge.
S&F 4 mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and as directed.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level, complete all as specified and as directed.
M&L for RCC M-25 design mix in foundations, incl rafts roofing, foundation, beams, plinth beams for column etc, basement slabs, under rammed piles and mass concrete, complete all as specified and as directed.
M&L for RCC M-25 design mix in column pillers, piers, posts and struts, complete all as specified and as directed.
M & L RCC nominal Mix M-25 using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span and the like, complete all as specified and as directed.
M & L RCC design Mix M-25 using 20 mm graded stone aggregate as in shelves, slab and the like, complete all as specified and as directed.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter rough finished surfaces of concrete, complete all as specified and as directed.
M&L for Formwork to sides of pillars,posts, struts, piers, columns and stanchions, complete all as specified and as directed.
M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and as directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and as directed.
M&L TMT bars 10 mm dia and over , cut to length, bent to shape required, including crancking, bending spirally for hooping for columns ,hooking ends & binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & as directed.
M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.
Supply & fixing of pre-painted colored trapezoidal profiled Galvalume/Zincalume sheet with 0.5mm thick of any colour ,tensile strength of 550Mpa as in roof covering ,cladding to wall ,ridge,gutter etc fixed with self tapping screws, complete all as specified and as directed.
All as per item No.46 above but plain sheet for ridge ,gutter etc fixed with self tapping screws, complete all as specified and as directed.
Taking down cement plastering on brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water etc, complete all as specified and as directed.
M&L rendering 15 mm thick cement plaster on brick wall in CM 1:4 mixed with WPC @ 2% by weight of cement or as per manufacture instruction and finished even and smooth without using extra cement complete all as specified and as directed. (Note : WPC will be measured and paid for separately), complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of Brick work of concrete surface in cement mortor 1:6 finished fair & even without using extra cement, complete all as specified and as directed.
M&L 10mm thick rendering in cm (1:6) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement, complete all as specified and as directed.
Supply only liquid water proofing compound as specified and as directed.
M&L prepration of new steel surface and applying two coats of synthetic enamel paint over one coats of red oxide preparation of new surfaces over 10 cm width on ginth, complete all as specified and as directed.
M&L Applying two coats of Oil bound distemper by smart painting method to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.
M&L preparation of newely plaseter surfaces and appplying two coats of weather coat(Apex Ultima) over two primer coats of damp shealth to new plastered walls as per manufacturer and apllied by approved applicator complete all as specified and directed.
M&L complete removal of old plaseter sufaces by smart painting method and appplying two coats of Oil bound distember to old/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer complete all as specefied and directed.
M&L complete removal of old plaseter sufaces and appplying two coats of weather coat(Apex) over one coat of damp proof primer to wall/chajja of external surface as per manufacturer instruction and apllied by approved applicator complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc, complete all as specified and directed.
M/L Granite (of any type) tiles 18-20 mm thick machine cut (table rubbed and polished), bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:6 over cooking platform including grinding the edges half round and polishing including etc complete all as specified and directed.
M&L 18-20 mm thick Granite (of any type) tiles machine cut (table rubbed and polished), in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10mm thick screed bed in CM 1:4 including grinding the edges half round and polishing including etc complete all as specified and directed.
S&F Coloured Glazed ceramic tiles 450 x 300 mm x 6 to 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete including rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed
M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 for laying floor finishes complete all as specified and as directed.
M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 for laying floor finishes complete all as specified and as directed.
All as per item No 63 above but in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete including rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed
M&L for Chequered cement concrete tiles of size 300 x 300 x 20 to 25 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
Supplying and laying of 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or conceled complete all as specified.
Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or conceled complete all as specified.
Supplying and fixing 16mm dia CPVC Brass Elbow complete all as specified.
Supplying and fixing 16mm dia CPVC Brass Tee complete all as specified.
Supplying and fixing 20mm dia CPVC Brass Elbow (3/4 X ½) complete all as specified.
Supplying and fixing 16mm dia CPVC Female Brass Threaded Adaptor (FTA /FBTA) complete all as specified.
Supplying and fixing 20mm bore CPVC Gate valve/stop cock complete all as specified.
M&L for 75mm thick PCC type C-2, 1:3:6 (using 40 mm graded aggregrate) as in sub base, flooring, plinth protection Finishing cement concrete surface even and smooth Without using extra cement, complete all as specified and directed.
M&L Sand filling under floors or in foundations or in trenches including watering and consolidation, complete all as specified and directed.
Supply and fix, vitreous china wash down water closet pan (Pedestal pattern) 'P' or 'S' trap, white (excluding flushing cistern and flush pipe) including seat cover white closed type complete all as specified and directed
Supply and fix, as in repair, vitreous china wash basin, white, flat back size 580 x 450 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.
Supply and fix,10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed.
Supply and fix stop valve/ angle valve, cast copper alloy, fancy type, chromium plated with long shank and cup screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified and directed.
Supply and fix stop valve cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified and directed.
S&F swivel shower of brass chromium plated with long head for fixing with 15 mm pipe all as specified and directed.
Supply and fix, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.
Supply and fix, Hand Shower (Health Faucet) (Brass chromium plated) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed.
S&F CP grating 100mm dia all as specified and directed.
S&F PVC (SWR) floor trap ,plain with grating including jointing with solvent cement 75 mm dia complete all as specified and directed.
Supply and fix, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls all as specified and directed.
Supply and fix, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls all as specified and directed.
S&F PVC (SWR) 110mm dia bends any radius all as specified and directed.
S&F in repairs PVC (SWR) 75 mm dia bends any radius all as specified and directed.
S&F 110 mm PVC (SWR) junction single,(Single T) equal or unequal all as specified and directed.
M&L Damp proof course 40mm thick In cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces including necessary formwork, complete all as specified and directed.
M & L for PCC 1:3:6 type C1 using 20 mm graded aggregate as in copping, holdfast and the like including weathering, slightly rounded or chamfered angles and throating, as directed
M&L for PCC 1:3:6, Type C-2 (40mm graded aggregrade) as Cement concrete in surface channels and drains
M&L for Rcc 1:2:4, Type B-1 precast cement concrete in cover slab for manhole set in cement morter 1:6 complete all as specified and directed.
M&L Providing, cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in roof kerbs ,coping or mud stops, rounded or chamfered on edges complete all as specified and as directed.
M&L Cement concrete 1:3:6 type C-2 Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they arelaid and tested; in 100mm bore pipe, complete all as specified and directed.
Taking down carefully unserviceable point wiring (light,fans,socket etc) complete incl battens and fittings such as switch, ceiling rose,light fittings, regulatos, socket etc and making good disturbed surface of wall/floor etc complete all as specified.
M & L for point wiring for one light /fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn through PVC casing capping with all accessories incl PVC sunken boxes of approved size for fixing switches, sockets etc and 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity complete all as specified and directed.
All as per item No. 97 above but for one fan/Exhaust fan point
All as per Ser item No 97 above but for 5 amps socket on independent board.
S&F switch piano type, 2 Amp. SP, one way all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG
S&F socket outlet, 2 in one 5 pin, 5 Amp, piano type all as directed/ specified. Make- legrand/Anchor/ Havells
S&F Ceiling rose 3 phase, PVC/ Polycarbonate body all as directed/ specified.
S & F electronic fan regulator,100W ,230V ,50Hz stepped socket type for ceiling fan complete all as specified . Make- Anchor/Leader/Standard
Supply and Fix wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 20W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting. Make-Havells cat No LHEXAWP7IN1W020 or equivalent in Philips/Havells/CG/Orient all as directed by EIC.
S & F Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes all as specified and directed by Engineer-in-charge. make- L&T/Havells/C&S/legrand/hager.
S & F MCB DP 6 to 32 Amps, B series, 230 Volts complete all as specified and directed . Make - Standard/Havells/C&S
S & F MCB SP 6 to 32 Amp, B series , 230 Volts complete all as specified and directed . Make - L&T/Havells/C&S/legrand/hager.
M & L Earthing complete with GI earth plate electrode 60cmX60cmX6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connecting to galvanized earth wire of dia 4mm as earthing conductor and all as shown in Electrical plate No.3 of SSR Part I and including testing on completion all as specified locations and as directed by the Engineer-in-Charge. Note: 1.The above quoted rate shall include cost of main earthing lead wire of 4 mm dia, charcoal, salt, excavation and earth work in any type of soil CI cover, funnel with 20mm dia light grade GI water pipe including GI protection pipe 40mm dia light grade for earth strip etc. 2. The cost of earth pit is deemed to be included in the unit rate. 3. The cost of taking down old unsv earthing with all its accessories is deemed to be included in the unit price, complete all as specified and directed.
S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq mm 2 core including taking down old unsv cable complete all as specified and directed.
M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.
Supply, lay and fix 25 mm bore galvanized iron water tubing light grade including all fittings and fixed/ laid in trenches or on poles complete all as specified and directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)
Chinmay Traders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .