Tender ID

Kerala

Active

Works

Civil Works - Water Works

State Plan- 2024-2025

Kerala Water Authority

KOOVAPPADY PANCHAYATH | Ernakulam, Kerala

Amount: ₹6.6 LCloses: 20 Nov 20266d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published13 Nov 2026
Closes20 Nov 2026
Bid Opening23 Nov 2026

Tender Value

₹6.6 L

EMD Value

₹16,402

Closing Date

20 Nov 2026, 6:00 pm6d left

Tender Inviting Organisation

Name

Assistant Exe. Engineer

Address

Assistant Exe. Engineer KWA PH Sub division Perumbavoor

Work Description

State Plan20242025Drinking water Drought mitigation and Emergency Works RWSS to Koovappady Providing valves for regulating water supply in Koovapady PanchayathGeneral Civil Work

Tender Information

Tender ID

2026_KWA_888870_1

Reference Number

WRDKWA-CECRTR203352023511RC 11

Tender Type

Open Tender

Product Category

Civil Works - Water Works

Form of Contract

Item Rate

Period of Work

30 days

Location

KOOVAPPADY PANCHAYATH

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

6 documents required · 6 mandatory

Fee/PreQual/Technical/Finance

Requireddigitallysigned8384specialcondition (.pdf)

Requireddigitallysignedpreliminaryagreement (.pdf)

Requireddigitallysignedlicence (.pdf)

Requirednonrelationshipcertificate (.pdf)

Requireddigitallysignedpricebid (.xls)

RequireddigitallysignedGST AND PAN (.pdf)

Fee & Financial Details

Tender Fee Amount

₹1,450

EMD Fee Amount

₹16,402

Important Dates

Last Activity

13 Nov 2026

Published

13 Nov 2026

Bid Opening

23 Nov 2026

Download Starts

13 Nov 2026

Download Ends

20 Nov 2026

Submission Starts

13 Nov 2026

Clarification Period

13 Nov 2026 - 19 Nov 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (21 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Working charges
1.001	100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.	33.75	cum	-	-
1.002	100.31.2.2:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 100mm diameter, Class II.	6	no	-	-
1.003	100.31.2.4:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 150mm diameter, Class II.	6	no	-	-
1.004	100.31.2.6:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 250mm diameter, Class II.	3	no	-	-
1.005	100.31.2.7:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 300mm diameter, Class II.	4	no	-	-
1.006	OD93238/2026-2027:Charges for arrange tripod, chain block and other dismantling equipment's for the dismantling of 300mm CI D/F sluice valve as per directions from departmental officers.	4	each	-	-
1.007	OD93307/2026-2027:Labour for cutting D.I. pipe with steel saw.	10	Each Cut	-	-
2Construction of valve chamber
2.001	2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil	9	cum	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

KWAGeneralConditionsforeTenderingV5.pdf

PDF • 0.69 MB

Tendernotice_1.pdf

PDF • 0.05 MB

Work Item Documents

Form8384.pdf

Tender Documents • 1.14 MB

BOQ_1518580.xls

BOQ • 0.31 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Working charges
1.001	100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.	33.75	cum	-	-
1.002	100.31.2.2:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 100mm diameter, Class II.	6	no	-	-
1.003	100.31.2.4:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 150mm diameter, Class II.	6	no	-	-
1.004	100.31.2.6:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 250mm diameter, Class II.	3	no	-	-
1.005	100.31.2.7:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 300mm diameter, Class II.	4	no	-	-
1.006	OD93238/2026-2027:Charges for arrange tripod, chain block and other dismantling equipment's for the dismantling of 300mm CI D/F sluice valve as per directions from departmental officers.	4	each	-	-
1.007	OD93307/2026-2027:Labour for cutting D.I. pipe with steel saw.	10	Each Cut	-	-
2Construction of valve chamber
2.001	2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil	9	cum	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Working charges

1.001

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

33.75

cum

1.002

100.31.2.2:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 100mm diameter, Class II.

1.003

100.31.2.4:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 150mm diameter, Class II.

1.004

100.31.2.6:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 250mm diameter, Class II.

1.005

100.31.2.7:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 300mm diameter, Class II.

1.006

OD93238/2026-2027:Charges for arrange tripod, chain block and other dismantling equipment's for the dismantling of 300mm CI D/F sluice valve as per directions from departmental officers.

each

1.007

OD93307/2026-2027:Labour for cutting D.I. pipe with steel saw.

Each Cut

2Construction of valve chamber

2.001

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

cum