SPL REPAIR TO ROAD AT VARIOUS PLACES (NEAR BLDGS NO P-9, P-4, P-8 TO P-131, P-155, P-52 TO P-19 AND APPROACH ROADS TO BLDGS NO P-41, P-34, P-37 INCL ROAD FURNITURE UNDER GE DEHRADUN

Amount

M&L for repair to pot holes of any depth, not exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at leat 25mm in depth making good by applying tack coat with bituminous primer @ 5 Kg per 10 Sqm, putting in primixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 sq.m blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including prmixed macadam, binder and chippings) depth of potholes exc 30mm complete all as specified and directed by Engr-in-Charge.

M&L for preparation of black top surface by brushing with mechanical broomer for removing caked mud etc sweeping with mechanical broomers and finally with air compressors to remove all loose dirt etc, complete all as speicified and directed by Engr-in-Charge.

M&L for preparation of black top surface and applying eveny a priming/tack coat with paving bitumen VG-10 @ 5 Kg per 10 Sqm on bituminous surface complete all as speicified and directed by Engr-in-Charge.

M&L for bituminous premix asphaltic dense concrete 30mm consolidated thickness with 5.5% binder by weight of total mix, rolled and compacted with vibromatic roller to required camber and gradient complete all as specified and directed.by Engr-in-Charge

M&L for preparation of road surfaces and applying thermoplastic reflective paint in marking of minium 1 to 1.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width with thermoplastic paint (Hot application) white/yellow by indigenous modern proplled road marking machine as directed including all ingredients such as blinder, glass beads, titanium dioxide clacium carbonate inter fillers, thermoplastic requirement for glass beads shall be the table No 800.4 of MORTH specification including spraying of glass beads etc all as per manufacture instructions complete all as specified and directd by Engr-in-Charge.

S&F in repair convex mirror of 24 inch dia with rod incl fixing in ground, height above ground should be 1.5 mtr and below ground should be 45cm incl PCC 1:2:4 type C1 using 20mm graded stone agg in section 15cm x 15cm x 50cm complete all as specified and direct by Engr-in-Charge.

Supply and fix in repair solar cat eye aluminum alloy shall water proofing design according to 65 of 100% size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystafied solar panel 2.4 V/Watt one NI-ed recharageable battery (1.2 V 0.3 1600 MA) consisting of super bright LED with to 18,000 mcd completed as per 10,000 manufactures instructions etc. all as specified and directed by Engr-in-Charge

S&F cat eye's dual directional reflective of tough poly carbonate of retroreflective glass beads of colour white/red/yellow side provided with including removal of old unserviceable stud complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed by Engr-in- Charge.

M&L for fixing of old delinator incl taking dwon in ground in 30 x 30 x 40cm deep pit (including excavtion and removal of soil filled with PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) and upto 30cm high post above ground level with size 30 x 30cm including necessary formwork with smooth finished, incl painting the post with paint and fixing of highlighting tape complete all as speicified and directed by Engr-in-Charge.

S&F PVC speed breaker (500 x 300 x 50)/500 x 400 x 50)mm etc in black and yellow colour for high visibility with a load capacity of 40 x 45 tonnes compete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 50 mm thick cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregates) as in sub base Completel all as specified and directed.

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.all as per specified and directed.

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS (BID ID -3114421)

M/S BRIJPAL SINGH MALIK (BID ID -3115017)