Repairs to Various Building at GEC Valsad Ta.Valsad Dist.Valsad

Name of work :-

Repairs to Various Building at GEC Valsad Ta.Valsad Dist.Valsad

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Ite Quantity Unit Estimated Total Amount

Ite Quantity Unit Estimated Total Amount

No. Item of work In figure estimated

Rs. Ps. quantities

1 Dismantling santtary fittings like wash basin . W.C. pan Indian and 14.00 Nos. 405.65

European type, flushing tank etc. including stacking the materials with all

2 Providing laying and jointing in true line and level 15mm dia. 70.00 Rmt. 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

3 Providing laying and jointing in true line and level 25mm dia. 65.00 Rmt. 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

4 Providing laying and jointing in true line and level 40mm dia. 65.00 Rmt. 148.12

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

5 Providing, laying and jointing in true line and level 110 diametre U.P.V.C 35.00 Rmt. 836.73

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost

of all materials.

6 Providing and fixing PVC SWR Nahni trap with SS or PVC jali IS 14735 for 16.00 Nos. 571.08

drain - 100 mm diameter with jali of the following nominal diameter of

self cleansing design with C.I scread down or hinged grating including the

cost of cutting and making good the walls.

7 Providing and fixing screw down bib taps of following size.(B) Brass 26.00 Nos. 186.83

chromium plated screws down Bib Tap. (i) 15mm dia.

8 Providing and fixing brass screw down stop tap.(A) 15mm dia. 17 Nos 205.83

9 Providing and fixing pillar tap, capstan head, screw down high pressure 19 Nos 308.73

with screws, shanks and back nuts. (i) 15mm dia.

10 Providing and fixing chromium plated brass half trun flush cock of 17 Nos 263.77

approved quality including fixing in pipe line etc. complete.(ii) 25mm dia.

11 Providing and fixing wsh down water closet (European type, W.C. Pan) 7 Nos 1303.71

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately) (A) vitreous China Pattern :(i) in white

12 Providing and fixing plastic seat and cover for wash down water closer 7 Nos 291.33

with C.P. brass hinges and rubber buffers. (B) Plastic seal and cover.

13 Providing and fixing washbasin with single hole for pillar tap with C.I. or 5 Nos 1961.83

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour.

14 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. 12 Nos 67.91

15 Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia. 12 Nos 78.75

16 Removing, Repairing and Refixing Old existing wooden door shutter 40 Nos 1324.11

including repairing the shutter/frame using Randha machine and

replacing old fixture and fastening with new SS 304 grade fixtures like

Hinges, 1 Stoppers 20cm, 1 Aldrop 25cm, 2 Handle 10cm, 1 Tadi 20cm

etc. and as directed by engineer in charge etc comp.

17 Dismentaling tiled of stone floors laid in mortar including stacking of 231 Sqm 48.21

serviceable materilas and disposal of unserviceable materials with all lead

18 Providing and laying water proofing treatment by conventional method 231 Sqm 854.46

including cleaning the slab surface by wire brush as directed including

provding first layer of C.M. 1:4 of 40 mm thickness mixed with water

proofing compound at rate prescribed by manufacturer, including putting

of brick bats of average thickness 40 mm Well immerssed in water laid

uniformly on first layer of mortar including applying cement slurry @ rate

of 0.08 bag/sqm. on fixed layer of brick bats including maintaining

necessary slope, in second layer 40 mm thick C.M 1:4 mixed with water

proofing compound as directed, including finishing smooth with cement

slurry as directed complete.

19 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in 231 Sqm 1073.13

flooring treads of steps and landing laid on a bed of 12mm thick cement

mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in

20 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting 107 Sqm 1141.45

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white cement slurry

21 Providing and fixing Urinal or approved quality including conecting the 17 Nos 3252.20

Urinal with waste pipe and Stop tap (Code: ECS-WHT-253, Jaquar) etc.

complete.(A) White earthenware flat back or corner type size 430mm x

260mm x 350mm. ( Make for Wash basin Cera, Jaquar, hindware, Plantex,

Jonshons etc directed by engineer in charge and completed.)

22 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. 10 Nos 67.91

23 Applying general insecticide pest control treatment to floors, cupboards 11 Sqm 89.28

etc including labour materials etc. complete. Using Imidacloprid 30.5 SCas

Per IS 6313 part -II( (0.075% concentration by mass) is recommended

10.5ml chemical diluted with 5 liters of water application 0.5 litre

chemical /Sqm of surface is recommended as per I.S.

24 Carrying out wall treatment for termite control including spraying with 1324 Sqm 42.32

chemical solution in oil base including labour and material Using

Chlorpyriphos 20 ECAs per IS 6313 part - II (1% concentration by mass) is

recommended i.e one litre chemical emulsion diluted with 19 liter oil

base. Total solution will be 20 liters inclusive of one liter chemical

emulsion application at the rate of 7.5 litre chemical / Sqm of surface is

recommended as per I.S.

25 Removing dry or oil bound distemper by a washing and scraping and sand 723 Nos 11.30

papering the wall surface smooth including necessary repairs to scratches

26 Removing dry or oil bound distemper by a washing and scraping and sand 1324 Sqm 12.90

papering the ceiling surface smooth including necessary repairs to

scratches complete.

27 Applying two coats of putty & two coats of primer of approved brand and 723 Sqm 40.59

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

28 Wall painting (two coats) with plastic emulsion paint of approved brand 723 Sqm 80.35

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

29 Wall painting (two coats) with plastic emulsion paint of approved brand 1324 Sqm 85.76

and manufacture on undecorated ceiling surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

30 Providing and laying broken chine mosaic flooring for terrace using 12 550 Sqm 747.29

mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar

1:3 to plain or slope and to be tempered to bring mortar creme out upto

surface using white cement including rounding off junctions and

extending them upto 15 cm along the wall, clearing with water and

oxalic acid etc. as directed.complete

31 Providing and fixing and embedding sand, C.I. rain water pipes in the 240 Rmt. 320.52

masonry surrounded with 12mm thick cement mortar of the same mix as

that of masonry. (A) 75 mm dia pipe.

32 Painting two coats (excluding priming coat) on new steel and other metal 784 Sqm 71.13

surface with synthetic enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign matter.

33 Providing and fixing of Ridge flashing for roof panel shall be made out of 63 Sqm 561.11

0.5 mm thick pre coated GI sheet . The Precoated sheet shall be of

minimum 240 mpa steel grade confirming to IS 14246:1995 and shall

have zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7 microns

epoxy primer on both side of the sheet and polyester top coat 15-18

micron. The PPGI Sheet shall have plastic protective guard film of

minimum 25 microns to avoid scratches during transportation. The ridge

shall be fixed to the steel members by pop rivet or self drilling/self

stitching fastners @ maximum 450 mm c/c along length of

capping/flashing etc complete .

Rupees Sixteen Lakh Fifty Five Lakh Nine Hundred Ninety Eight Only.

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the estimated

rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 1655998.00 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with detailed

specification and details of work and amount Involved at site without any payment as directed by Engineer-In-Charge.

2 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

3 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor under

4 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work under all

condition, site, moisture/ weather etc.

5 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government Resolution

T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the work order.

6 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by Executive

Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to Tender.

7 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other Construction works

walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated 9/12/2005 notification Of Labour

& Employment department dt.03/01/2005 & Labou & Employment Department Letter no GWA/2004-841M(B) Dt 14/12/2005 &

8 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of Cement

Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

9 Contractor are advised to visit site before loading tender rate.

10 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and drainage &

water supply connection and minor correction to perform experienced in Lab shall be done by contractor at his risk and cost.

11 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

12 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

13 GST and Income tax TDS will be deducted at a source while making payments of bills.

14 GST will be paid extra as per Govt. amendment.

15 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding

materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender Document

of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Valsad (R&B) Sub-Division

Signature of Bidder

Executive Engineer

Valsad (R&B) Division