Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.3 LAccepted-AOC | ₹5.3 L | L1 | Accepted-AOC LEAST |
| 2 | Rejected-Technical | - | - | Rejected-Technical 2ND LOWEST |
| 3 | Rejected-Technical | - | - | Rejected-Technical 3RD LOWEST |
| Sl No | Description | Qty | Unit | SAJI C L3 | JAYADAS P L2 | AJITHKUMAR M L1 |
|---|---|---|---|---|---|---|
| 1.00COMPOUND WALL | ||||||
| 1.00 | 50.6.3.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete | 19.76 | cum | 7,156.86 ₹1,41,419.55 | 7,078.02 ₹1,39,861.68 | 6,920.34 ₹1,36,745.92 Lowest |
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 174.8 | sqm | 308.8 ₹53,978.24 | 305.41 ₹53,385.67 | 298.6 ₹52,195.28 Lowest |
| 1.00 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | 174.8 | sqm | 67.52 ₹11,802.5 | 66.78 ₹11,673.14 | 65.29 ₹11,412.69 Lowest |
| 1.00 | 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 174.8 | sqm | 144.38 ₹25,237.62 | 142.79 ₹24,959.69 | 139.61 ₹24,403.83 Lowest |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 743 | kg | 192.86 ₹1,43,294.98 | 190.74 ₹1,41,719.82 | 186.49 ₹1,38,562.07 Lowest |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 407.5 | kg | 156.21 ₹63,655.58 | 154.49 ₹62,954.68 | 151.05 ₹61,552.88 Lowest |
| 1.01 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 160 | sqm | 703.32 ₹1,12,531.2 | 695.57 ₹1,11,291.2 | 680.08 ₹1,08,812.8 Lowest |
Tender Value
₹6.8 L
EMD Value
₹16,889
Closing Date
18 Oct 2025, 5:00 pmClosed
AEE NEYYATTINKARA MUNICIPALITY
OFFICE OF AEE
Annual Plan-142-MAINTANANCE AND COMPOUND WALL IN PERUMPAZHUTHOOR PHC-General Civil Work
2025_LSGD_807632_7
E5/AEE/LSGD/2025 /SIXTH
Open Tender
Civil Works - Buildings
Item Rate
180 days
NEYYATTINKARA MUNICIPALITY
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,490
Yes
₹16,889
Yes
10 Sept 2026
10 Oct 2025
21 Oct 2025
10 Oct 2025
18 Oct 2025
10 Oct 2025
Work Name:Annual Plan-142-MAINTANANCE AND COMPOUND WALL IN PERUMPAZHUTHOOR PHC-General Civil Work
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.26 MB
Tendernotice_2.pdf
PDF • 0.20 MB
Tendernotice_3.pdf
PDF • 0.21 MB
Tendernotice_4.pdf
PDF • 0.20 MB
Tendernotice_5.pdf
PDF • 0.19 MB
BOQ_1346842.xls
BOQ • 0.30 MB
sbd142.pdf
Tender Documents • 1.77 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .