Construction Two-Wheeler Parking after Railway Crossing at beneath the Overbridge near Narasang Tekri (2nd Attempt).

NAME OF WORK : Construction Two Wheeler Parking after Railway Crossing at beneath the Overbridge near Narasang Tekri.

Quantity Discription of Item Unit Amount

Demolition and disposal of unserviceable materials with all lead and lift.(i)

SOR Item No 20001A

Excavation for foundation upto 1.5 m depth including sorting out and

2 135.00 stacking of useful materials and disposing off the excavated stuff upto 50 128.79 CUM ₹

Meter lead.(A) Loose or soft soil

SOR Item No 04001A

Removal and Carting of Excavated stuff and laying within 5 km porbandar

limit as directed by Engineer in charge

Carting Statement 5A Quarry of material of Earth pg no 254pdf

Filling in foundation and plinth with murrum or selected soil in layers of

4 162.00 20cm. thickness including watering, ramming and consolidating etc. 307.41 CUM ₹

SOR Item No 04008A

Rolling of earthwork in layers with power roller including filling in

depressions which occur during the process.

SOR Item No 26002A

Providing & laying spreading and compacting 200mm thick WBM Grade - I

of B.T.M.C. metal 45mm to 90mm size including using 29% (22+7%) filler

i.e. stone screeing 13.2 mm at the rate 0.27 Cumt. & stone dust at the rate

0.08 cumt. including spreading in uniform thickness, hand packing, rolling

with vibratory roller 8-10 tonnes in stages to proper grade and camber,

applying and brooming type of screning/binding materials to fill up the

interstices of coarse aggregate, watering and compacting to the required

Providing and laying cement concrete 1:3:6 (1- Cement : 3-Coarse sand :

7 58.69 6- Graded brick bat aggregate 40mm normal size) and curing complete 3118.07 CUM ₹

excluding cost of formwork in (A) Foundation and Plinth

SOR Item No 05010AA

White Stone Bela mesonry block in course in superstructure with stone of

8 33.12 approved quality in Lime Mortar 1:5 (1- Cement :5- course sand) including 4158.02 CUM ₹

packing the joints etc. complete.

SOR Item No 05024AA

Providing ad laying approved quality and make coloured 80mm thik. Paver

Block duly approved by Engineer in charge and having required strength M-

40. The blocks to be laid between kerbs to get edge restrain. Rate incl.

cost of all materials, labour, transportation, equipments and all taxes etc.

incl. sand of 40 mm layer with proper watering etc. below blocks as

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M300 grade

10 500.82 concret as per approved design and including excavation for fixing in 419.96 Rmt ₹

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

SOR Item No 14023A

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

11 58.00 Cement : 3 coarse sand) and jointed with gray cement slury mixed with 1131.24 Sqmt ₹

pigment to match the shade of slab including rubbing and polishing etc.

SOR Item No 14013 A

Providing and supplying Precast wet cast reinforced concrete bollards of

size 250 × 250 × 900 mm in natural grey colour (without pigment),

manufactured with high-quality materials and internal steel reinforcement

12 30.00 to ensure strength, durability, smooth finish, and long service life, suitable 2142.00 No ₹

for pedestrian protection, traffic management, and security applications in

high-traffic areas, on supply-only basis, complete as directed and in

accordance with the Engineer-in-Charge

Finishing wall with water proofing cement paint of on wall surfaces (Two

coats) to give an approved brand and manufacture and of required shape

even shade after thoroughly brushing the surface to remove all dirt and

remains of loose powered materials

SOR 2024-25 It.No.

Repairing the existing rainwater spout pipeline under flyover, including

tracing the line, clearing blockages, carrying out necessary repairs,

14 160.00 extending the pipeline up to the designated outfall point at the drainage 890.00 Rmt ₹

area, and completing all associated labour, fittings, and allied works as

directed by the Engineer-in-Charge.

The agency shall carry out the work at a height of approximately 10 metres

by means of a hydraulic crane or other suitable vehicle, with all such

arrangements to be made by the agency at its own cost and scope. All

electrical connections, safety measures, and allied arrangements required

for execution shall also be in the scope of the agency. The work shall be

carried out strictly as clarified and approved by the Engineer-in-Charge.

Providing and fixing rainwater collection system by means of G.I. sheet

gutter fabricated and bent/turned to the required profile, having a width of

0.80 metre and a minimum sheet thickness of 1.20 mm, fixed along the full

length of the roof edges under the two individual slabs of the flyover,

supported with G.I. strip clamps/brackets at suitable intervals. The gutter

shall be aligned and jointed in such a manner that the entire rainwater

collected from the roof edges is directed into the designated rainwater

collection chamber, complete with necessary cutting, bending, jointing,

sealing, and allied works as per standard specifications and as directed by

the Engineer-in-Charge.

The agency shall execute the work at a height of approximately 10 metres

by means of a hydraulic crane or other suitable vehicle, with all

arrangements (equipment, vehicle, staging, scaffolding, safety gear, etc.)

to be made at its own cost and responsibility. All electrical connections,

lighting, safety measures, and allied arrangements required for execution

shall also be in the scope of the agency. The work shall be carried out

strictly as clarified and approved by the Engineer-in-Charge, and payment

shall be released only after such confirmation.

Road marking with hot applied thermoplastic paints with reflectorising

glass beads on bitumin surface providing and laying a hot applied

thermoplastic compound 2.5 mm thick including reflectorising glass beads

@ 250gms per sqm area, thickness of 2.5mm is excluding of surface

applied glass beds as per IRC:35-2015. The finished surface to be level,

uniform and free from streaks and holes. zebra patta /bump patta

16 43.00 lane/center line/ edge line/cut patta. The white color marking should 367.72 Sqmt ₹

provide liminance coefficinet on cemend road shalll be min

mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the

service life during the day time. The marking should meet the performance

criteria for night time reflectivity, wet reflectivity and skid resistance as

mentioned in the section-15 of IRC 35-2015. Warranty for the Retro

reflectivity should be two years.

SOR 2024-25 It.No.

Providing cement vata (10cm. x 10 cm. size) quarter round in cement

mortar 1:1 including neat cement finishing, watering etc. complete.

SOR 2024-25 It.No.

PORBANDAR MUNICIPAL CORPORATION

NAME OF WORK : Construction of a Storm Water Drain Works at Two Wheeler Parking after Railway Crossing at beneath the Overbridge near

Narasang Tekri.

Quantity Discription of Item Unit Amount

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

SOR Item No 04001A

Removal and Carting of Excavated stuff and laying within 5 km porbandar limit as directed

by Engineer in charge

Carting Statement 5A of Earth work

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1- cement :2-coarse sand : 4-

graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement

Mortar 1:3 (1-Cement : 3-coarse sand) finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-Cement :2- Coarse sand :4-stone

3 4.00 aggregate 20mm nominal size) finished smooth complete including curing and festing (i) 11042.73 Nos ₹

Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm

diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg.

and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having

crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse

sand) (1) A type depth 0.90 Metre for 150mm diameter sewer.

SOR Item No 24008A

Providing bedding incl. ramming, watering, levelling, consolidating etc. Complete as per

standard and instruction of engineer incharge

As above with required quality Sand brought from outside inclduing all lead

GWSSB SOR 2022-23, Item No. 3, Part 1&2 B, Page No.

Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting Cement) in

standard lengths of following class and diameter suitable for either collar joints or rubber

ring joints including all taxes, insurance, transportation, freight charges, octroi, inspection

5 24.00 charges, loading, unloading, conveyance to departmental stores, stacking etc. & Lowering, 2153.95 RMT ₹

laying and jointing R. C. C. pipes in C. M. 1:1 1/2 of following diameters in proper position,

grade and alignment at all level as directed by Engineer-in-charge including conveyance

from stores to site of work, labour, giving hydraulic testing as per ISI code.

Note : One collar should be supplied with each full length plain ended RCC pipe, cost

included in rates below. One rubber ring should be supplied with each full length socketed

pipe, cost included in rates below.

Box Cricket Ground beneath (F2) 400 mm dia (NP4 Class)

GWSSB SOR 2022-23, Item No. 10.1.D & 10.1.E, Part 1&2 A, Page No. 15 & Item No. 11.b,

Part 1&2 B, Page No.

Refilling the pipeline trenches incl. ramming, watering, consolidating desposal of surplus

stuff as directed within a radius of 3 km.

GWSSB SOR 2022-23 Section 1&2 B, Item No. 14, Page No.

7 2.00 Tracing of old Manhole. All Types Of Manhole at Every 15 Mt. 1214.00 Nos ₹

As Per Market Rate

PORBANDAR MUNICIPAL CORPORATION

Name of Work:- ELECTRICAL WORK at Two Wheeler Parking after Railway Crossing at beneath the Overbridge near Narasang Tekri.

ITEM NO. REFERENCE DESCRIPTION QTY UNIT UNIT RATE AMOUNT

Incomer 1 Nos. 29,997.00 ₹

Supply, installation, testing, and commissioning of the LV Distribution Board (LVDB), totally

enclosed, dust- and vermin-proof, indoor type, fabricated from CRCA sheet steel with a

minimum thickness of 3.0 mm for the base frame, channels, and gland plates, 2.0 mm for load-

bearing members and doors, and 1.6 mm for internal partitions. The LVDB shall have a

minimum degree of protection of IP-52 as per IS: 2147 and shall be suitable for operation on a 3-

phase, 4-wire, 415 V, 50 Hz system with effectively grounded neutral. The board shall be

provided with dedicated instrumentation compartments accommodating meters, auxiliary and

protective relays, LED-type indicating lamps, and control MCBs as per IS: 13947, along with

current and voltage transformers conforming to IS: 2705. Air-insulated electrolytic-grade

aluminium or copper busbars shall be provided for the three-phase and neutral system, with a

GI earth bus running throughout the entire length of the panel. Power and control wiring shall

GWSSB SOR 2022-23, be carried out using 1100 V grade FRLS insulated copper conductor wires conforming to IS:

1 Section E, Item No. and IS: 8130. The panel shall include all necessary equipment fittings and a horizontally running

1.16b,Page No.84 busbar compartment with a minimum height of 300 mm. Incoming and outgoing cable

connections shall be suitable for 1100 V grade aluminium or copper conductor, XLPE/PVC

insulated and PVC-sheathed armoured cables. The LVDB shall be complete with the required

incoming, bus-coupler, and outgoing modules of the specified types and ratings.

Above 16 A, upto & including 80 A, 3 & 4 Pole, Air Break Fixed MCCB conforms to IS/ IEC 60947-

2 with trip free mechanism, current limiting type with Thermal Magnetic / Microprocessor

release (O / C, S / C & E / F) with adjustable settings & having minimum 2NO+2NC potential

free auxiliary contacts with all necessary Electro-Mechanical protections & interlocks etc. MCCB

module, when used as Outgoing(s), shall have enclosure dimensions- 300(H) x 500(W) x 600 (D)

& following technical features:

3 Pole, MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of

Icu), Microprocessor release

SITC of Power Distribution Board (LDB) as under: 1 Nos. 2,422.03 ₹

Providing and erecting Sheet Steel powder coated MCB distribution board - flush /surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

R&B SOR 2025-26, Item 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same

2 company of MCB to be used) suitable for

No. 3.11.5(B-iii)

3 Phase 4 Wire TPN, 8 way Prewired LDB for Indoor and Outdoor Lighting:

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity 1 Nos. 3,010.60 ₹

of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on 3 phase

and neutral 415V,50Hz. having characteristic of quick action & tripping with all advance feature

& do not incorporate any electronic component for following Max. rating erected as directed.

R&B SOR 2025-26, Item Incoming: 63A TPN, ELMCB (30mA)

No.-3.12.2(iii) Cat-III,

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA 6 Nos. 573.26 ₹

R&B SOR 2025-26,Item breaking capacity & confirms to IS :8828 in existing box having following capacity

No.-3.10.4 A Cat-III, Outgoing: 6 nos. 6-32A FP MCB 'B' Curve

MEDIUM VOLTAGE CABLES 100 Mtr 150.12 ₹

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

R & B Ele SOR 2025-26, conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of

Item No. 4.3.5-(A) following size of cables

4C x 16 sq. mm. A2XFY Cable ( From incomer to PDB)

CABLE GLAND 4 Nos. 47.11 ₹

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated

R & B Ele SOR 2025-26, armoured cable complete with out going tails, insulating tape etc for following size of cables

Item No. 4.6.1 -(D)+ 4C x 16 sq. mm. A2XFY Cable

CABLE LUGS 16 Nos. 15.03 ₹

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size

R & B Ele SOR 2025- evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium

26,Item No.-4.7.1-C plated nut bolts in an approved manner.

4C x 16 sq. mm. A2XFY Cable

ITEM NO. REFERENCE DESCRIPTION QTY UNIT UNIT RATE AMOUNT

CHEMICAL EARTHING SYSTEM 2 Nos 5,788.31 ₹

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe

dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant

ohmic value surrounded by highly conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty cover (A)(approved make OEM has to

submit test certificate including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to ensure the value of earthing resistane

R & B Ele SOR 2025-26 mentioned in test Certificate) & having back filling compound of (B) Inner chemical

8 (CCMCompound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- <

Item no. 3.14.10-(A)

1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :Earthing

compound should be capable to retain moisture for long time Necessary test report must be

submitted by Agency.

[A] For electrical installation up to 440 V Length of Pipe - 1 Mtr Back filling compound - 1 Nos.

of Bag of 15 Kgs.

(2nos. Each for body of Panel)

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ 115 kg 77.17 ₹

ACB/ Transformer LT panel board, Motors etc.using proper clamp.

R & B Ele SOR 2025-26 Size of 50mm(w) x 6mm(T)

Item no. 3.14.2 (50X6 G.I Strip wt.2.3 kg/m, 2.3x50Mt.=115kg.) ( For incomer Panel )

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. (For LDB and PDB 5 Kg 77.17 ₹

R & B Ele SOR 2025-26

Item no. 3.14.5

(8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 50Mt.=5 Kg)

INTERNAL WIRING 200 Mtr 101.06 ₹

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

R & B Ele SOR 2025-26 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

Item no. 1.4.1 A-A-(D) stranded wire of green colour for earth continuity of following size (a) SITC of Mains wiring with

3 wire 1.5 sq.mm.

(A) With medium class Rigid PVC pipe and accessories

3 wire 2.5 sq. mm

INTERNAL LED LIGHT FIXTURES & LIGHTING: 9 Nos. 5,144.28 ₹

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

R & B Ele SOR 2025-26 lumens/watt . LED driver efficiency > 85 %.( fittings required LM79 & LM-80

12 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

Item no. 2.16.2 B-(i)

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.

(i) above 40 to 48 watts

SITC of 'B' class galvanised iron pipe 32 mm outside dia 45 cms long duly welded on 20 cms 9 Nos 340.43 ₹

R & B Ele SOR 2025-26 x 20 cms x 3 mm thick M.S. base plate, erected on wall or corner for mounting luminaire with

Item no. 6.5.6 necessary hardware materials duly painted for wall mounting indoor & outdoor flood light

fixtures on Wall of Buildings.

C TOTAL OF ELECTRICAL WORKS ₹