Treated Waste Water Micro Irrigation Project of STP Radaur District Yamuna Nagar

Amount

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form work for Columns, piers, abutments, pillars, posts and struts.

Centering and shuttering including strutting, propping etc. Suspended floors, roofs, landings, balconies and access platformSuspended floors, roofs, landings, balconies and access platform

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 stone aggregate with 20 mm nominal size.

Reinforced cement concrete work in beam suspended floor, roof having slope upto 15 degree landing balconies, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Supply & fixing Windows frames (Chowkhats) including mullions consisting frame fabricated from sheet roll formed out of 0.58mm thick galvanized sheet (Base steel as per IS 513) with zinc of 120 gm/sqm steel sheet pre coated (as per approved colour) with Polyster paint of 12-16 micrones thickness under coat of EPOXY primer & back coat with ALKYD backerof 5-7 micrones total thickness of coating 0.58mm of approved shade, weldless corner assembly with brackets & screws, fixed in position by means of PVC & metal hold fastner with PVC cap complete in all respects as per drawing, design, specification & entire satisfaction of Engineer-in-charge Door Frame of size 125mm x 60mm with 37mm wide single rebate for 35mm door shutter

Supply & fixing Windows frames (Chowkhats) including mullions consisting frame fabricated from sheet roll formed out of 0.58mm thick galvanized sheet (Base steel as per IS 513) with zinc of 120 gm/sqm steel sheet pre coated (as per approved colour) with Polyster paint of 12-16 micrones thickness under coat of EPOXY primer & back coat with ALKYD backerof 5-7 micrones total thickness of coating 0.58mm of approved shade, weldless corner assembly with brackets & screws, fixed in position by means of PVC & metal hold fastner with PVC cap complete in all respects as per drawing, design, specification & entire satisfaction of Engineer-in-charge Windows Outer frame of size 72mm x 55mm and central mullion 72mm x 50mm with Double rebate.

Brick work with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in Cement mortar 1:4

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Centering and shuttering including strutting, propping etc. Suspended floors, roofs, landings, balconies and access platformSuspended floors, roofs, landings, balconies and access platform

Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work PVC pipe of 32 mm dia.

PVC CONDUIT and MS/GI BOX only for LIGHT/FAN/Call bell point wiring Group B

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter

12 mm cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand)

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand)

Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required 2 run of Size 2.50 Sqmm(1.1.80mm)

Supply and erection of suitable MS/GI Box covered with 3 mm thick Bakelite sheet as below 200 mm X 150 mm X 60 mm deep metal box

Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect Switch 5 amp. on existing sheet

Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect Wall socket 5 amp on existing sheet.

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect step type Fan Regulator 2 modules 300 watt

Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class teak wood 30 mm thick

Design, Supply & erection of transformer of standard make Required 25KVA 11/0.433 KVA rating outdoor type 11 KVA V.C.B, panel, G.O. switch,H. Pole , H.T metering panel, APFC panel, battery charges, 11 KVAsubstation, entire cable network from G.O. switch to H.T meteringequipment and from H.T etering to Transformer. From transformer tomain to L.T, panel earthling, safety equipment, fenced enclosure fortransformer, and anyother contingent thereto complete in all respect asper approved make and directions of Engineer-in-charge as per respective capacity

Structural steel work in single section, fixed with or without connecting plate, kg 11 68 80 including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, with in lead of 50 Mtr.

M-15 grade plain cement concrete (cement content considered @ 240 kg/cum)

Providing and fixing in position LDPE film of 500 micron (0.50 sqm 47 144 191 mm) IS mark of grade 231 for bed and sides of canal including cost of all materials, labour, laying, joining as per specifications etc. complete with all leads and lifts.

Supply Installation testing commissioning of Solar Photovoltaic grid connected roof top Plant conforming to MNRE pecifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength including VFD with following components complete as required:- 1. Above 10 kWp and up to 100 Kwp

Planning, Design, Supply & Installation of 12W LED Street lighting of 75W Solar Panel, 12.8 V, 30 Ah, Lithium Ferrophosphate Battery including Pole of 5 m above ground level.

Providing and laying 50mm thick factory made cement concrete inter1ocking sqm 128 441 569 paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in require colour and pattern over (BIS 15658:2006) and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge

Planning, Design, Supply, Insttalation, testing & commissioning of Solar Powered Motor Pumping sets including Drives, Starters etc. Head- 45m -50 m, 13 lps., (2 Working + 1 Standby )

Supply, Installation, Testing & commissioning of C. I. Double Action Air / Vaccum Release Valve 65 mm with Accessories

Supply, Installation, Testing & commissioning of C.I. Non Return Valve 100 mm,

Supply, Installation, Testing & commissioning of Plastic Pressure Relief 80 mm

Planning, Design, Supply, Installation, testing & Commissioning of HDPE Pipes confirming to IS:4984, PE-80 & PE-100 respectively: HDPE Pipe 140 mm x 4 kgf/cm2

HDPE Pipe 160 mm x 4 kgf/cm2

HDPE Pipe 200 mm x 4 kgf/cm2

HDPE Pipe 110 mm x 4 kgf/cm2

Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :- 1.Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.

Supply, Installation, Testing & Commissioning of Hydrant Assembly complete 4"

Supply, Installation, Testing & commissioning of C. I. Sluice Valves on respective size of Pipes, Cl-1 :- Sluice Valve 100 mm

Sluice Valve 125 mm

Sluice Valve 150 mm

Sluice Valve 200 mm

Supply installation tasting of Net metring, HT net metr, Lt metr, Ht, Ct and Pt,Lt Ct, box of Ht,Box of Lt

Supplying and Fixing of PVC water bars for water stops flexible physical plastic for preventing leakage in concrete joints to avoid seepage ( Fixostop) with ribs and central bulbs marked as per IS-12200 of 2001 along with bitumen filler complete in all respects.150mm wide X 6.00 mm thickness of wall

Sh Amrit Lal Nagpal