SPECIAL REPAIR TO FIRST FLOOR OF BLDG NO. 1773 AT ARMY AREA JODHPUR UNDER GE (ARMY) NO. 01

Amount

S&F in repair rotational moulded polyethylene water storage tanks triple layer white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified cap 500 ltr incl taking out old PVC/RCC tank & removal away from site ,complete all as specified and directed by Engr-in-charge.

S&F in repair Ball valves 20 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s .) complete all as specified and directed by Engr-in-charge.

Taking down steel water tubing 15 mm dia and connections, including cleaning for re-fixing or remove to store complete all as specified and directed by Engr-in-charge.

All as above but 20 mm dia complete all as specified and directed by Engr-in-charge.

Supplying and laying of CPVC pipes outer dia 20 mm , SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engr-in-charge.

Supplying and laying of CPVC pipes outer dia 25 mm , SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engr-in-charge.

S&F brass elbow suitable for CPVC pipes outer dia 20 mm complete all as specified and directed by Engr-in-charge.

S&F brass elbow suitable for CPVC pipes outer dia 25 mm complete all as specified and directed by Engr-in-charge.

S&F brass tee suitable for CPVC pipes outer dia 20 mm complete all as specified and directed by Engr-in-charge.

S&F brass tee suitable for CPVC pipes outer dia 25 mm complete all as specified and directed by Engr-in-charge.

S&F male brass threaded adaptor suitable for 25 mm pipe complete all as specified and directed by Engr-in-charge.

Demoltion of cement cocrete padding of water proofing treatment from roof pading taking down bituminous polythene sheets plaster etc overall thickness n.exc 200mm , cleaning of concete surfaces by wire brushres scrubbing down water and removing the dust debris etc. to a distance 50 mtre but n.exc 250 mtr from the site, complete all as specified and directed by Engr-in-charge.

M&L for Plain cement concrete 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) as over roof for making good depression/ undulation to make the existing as filling in depression of roof slab including water proofing compound @ 200 gm/Kg cement, complete all as specified and directed by Engr-in-charge.

M&L for prepartion of existing concrete surface and applying two layers of thermacol 0.3C subsiquently over a coat of aborption coat by mixing W51 waer in 1:10 ration and further water proofing coat by mixing thermacol WP51 + cement in up to 1:1.5:1 by volume with power mixutre and applying over the entire surface application will be applied through authorised applicator complete all as specified and directed by Engr-in-charge.

Taking down cement plaster on brick or stone walls, tiling & ceilings including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engr-in-charge.

M&L for 15 mm thick rendering on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished fair and even without using extra cement in CM 1:6.,complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:4 over stone masonry surfaces & finished smooth & even w/o using extra cement with using integral water proofing liquid as per mfr instructions, complete all as specified and directed by Engr-in-charge.

M&L for 10 mm thick rendering in CM 1:4 over conc surfaces finished even & smooth as in ceilings, complete all as specified and directed by Engr-in-charge.

Taking down carefully cement conc /spalled out concrete from RCC roof projections, cilinigs ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc ,complete all as specified and directed by Engr-in-charge.

M&L for Cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface complete all as specified and directed by Engr-in-charge.

M&L for Applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack, complete all as specified and directed by Engr-in-charge.

M&L for 15 -20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat, complete all as specified and directed by Engr-in-charge.

M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth w/o using extra cement, complete all as specified and directed by Engr-in-charge.

M&L for Plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in coping to parapet walls including necessary form work , complete all as specified and directed by Engr-in-charge.

M & L providing 35 mm thick jodhpur stone louvers & jallies (measured solid) set in cement mortar 1:4 complete all as specified and directed by Engr-in-charge.

M&L for complete removal of existing treatment from walls/chhajja and applying Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on new/old surface complete application will be applied through authorised applicator complete all as specified and directed by Engr-in-charge.

Demolition of PCC as in flooring, plinth protection etc n. exc. 15 cm thick complete all as specified and directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L for 20 mm thick Black granite stone as in cooking platforms , slabs for oval type WHB,sinks etc & the likes complete laid over 15 mm thick cement sand screed in CM 1:4 incl mirror polishing complete & providing necessary holes for gas pipe / water supply pipes etc . complete all as specified and directed by Engr-in-charge.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.09 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. complete all as specified and directed by Engr-in-charge.

M&L for Double charged light/dark coloured Vitrified Ceramic tiles 9-10 mm thick area of each tiles not exc 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-charge.

M&L for PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engr-in-charge.

M&L for 15 mm thick Screed bed or bedding layer of CM1:4 for laying floor finishes. complete all as specified and directed by Engr-in-charge.

M&L for 10 mm thick rendering in CM1:3 over stone masonry surfaces & finished even & rough to receive tiles. complete all as specified and directed by Engr-in-charge.

M&L for Coloured Glazed ceramic tiles digital print series in vertical surface 300x450 mm size 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match . Note :- The tiles shall be in one or more colour patterns incl highlighters all as approved & directed at site. complete all as specified and directed by Engr-in-charge.

S&F in repair 15mm bore CP brass bib cock screwed for iron pipe or ferrule and fixed complete all as specified and directed by Engr-in-charge.

S&F in repair CP wall mixture 3 in-1 system for iron pipe or ferrule and fixed complete all as specified and directed by Engr-in-charge.

S&F in repair Over head Shower rose 150x150 mm of ABS Body chrome plated with grey face plate & with arm having swivel joint cromium plated best quality complete all as specified and directed by Engr-in-charge.

S&F in repair CP Health foucet with 1200mm long flexible mild steel tube 80mm dia with wall hook and complete all as specified and as directed and approved by Engineer-in-Charge.

S&F in repair cast copper alloy Two way angle cock/tap chromium plated fancy type 15 mm bore /size complete all as specified and directed by Engr-in-charge.

S&F in repair 15mm bore Brass CP central hole basin mixer popup waste system with 450mm long copper pipe and brass nuts ISI Marked complete all as specified and directed by Engr-in-charge.

S&F in repair soap dish, chromium plated fixed to wall with screws complete all as specified and directed by Engr-in-charge.

S&F in repair floor mounted 600x466x680mm, cabinet of material HDHMR Light coloured vitreous china, wash hand basin of size 605x455mm mirror with shelf 600x700 mm, complete all as per sample approved with , CP waste coupling, PVC connection 15 mm size & 45-60cm long & PVC Waste coupling complete all as specified and directed by Engr-in-charge.

S&F in replacement Rimless Single Piece EWC (Brand-I) Size: 395x710x730 mm, with UF Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set,etc complete, S Trap- 300 mm, complete all as specified and directed by Engr-in-charge.

S&F in repair 15mm bore CP brass angular stop cock screwed for iron pipe or ferrule and fixed complete all as specified and directed by Engr-in-charge.

S&F in repair Corner Glass shelf 250mm superior quality with CP tubular framing & brackets complete all as specified and directed by Engr-in-charge.

S&F in repair 5 - 6 mm thick bevelled edges high quality looking mirror fancy type fixed to wall with chromium plated screw with cup washers etc complete all as specified and directed by Engr-in-charge.

S&F in repair Tubular towel rail 20mm dia brass chromium plated `D' type 60cm long with bracket and fixed complete all as specified and directed by Engr-in-charge.

S&F in repair CP toilet paper holder complete all as specified and directed by Engr-in-charge.

S&F in repair spun type , Cast iron soil waste and vent pipes 75 mm bore in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed by Engr-in-charge.

S&F in repair spun type, Cast iron soil waste and vent pipes 100 mm bore in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed by Engr-in-charge.

S&F in repair 75 mm bore cast iron Bends (any radius), complete all as specified and directed by Engr-in-charge.

S&F in repair 100 mm bore cast iron Bends (any radius), complete all as specified and directed by Engr-in-charge.

S&F in repair 75 mm bore cast iron branch pieces, tee (equal or unequal) with/without oval acess door (any radius), complete all as specified and directed by Engr-in-charge.

S&F in repair 100 mm bore cast iron branch pieces, tee (equal or unequal) with/without oval acess door (any radius), complete all as specified and directed by Engr-in-charge.

S&F in repair PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement for 75 mm bore of pipes, complete all as specified and directed by Engr-in-charge.

S&F in repair Decorative type curtain rod stainless steel finish of pipe 22 to 25 mm dia including Purpose made brackets and decorative finial as per sample complete all as specified and directed by Engr-in-charge.

Taking down chaukhats with shutters (without taking off shutters from the frames) area nexc 1.50 Sqm & removal from site complete all as specified and directed by Engr-in-charge.

Taking down shutters area exc 1.00Sqm but nexc 2 Sqm complete all as specified and directed by Engr-in-charge.

Taking down steel windows/ vents & remove from site complete all as specified and directed by Engr-in-charge.

M&L for 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides, both face covered with decorative face veneer withlipping/frame to match, including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed by Engr-in-charge.

M&L for 35 mm thick factory made second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (withoutsash bars), edges offraming plain,chamfered orrounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-charge.

M&L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a wood grain printed PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Wood Grain Printed(Both sides) PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed (both sides) PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per spec & drawing complete all as specified and directed by Engr-in-charge.

Solid PVC Door Frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet incl all edges printed to match the shade reinforced with M.S. Sq tube, suppling & fixing in opening as per spec & drawing complete all as specified and directed by Engr-in-charge.

Anodised aluminium barrel tower bolts, 150 mm size stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-charge.

S&F Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet,cast orextruded sections& fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-charge.

S&F Stainless steel butt hinges 100mm size medium wt fixed with steel nut blots in PVC door frames & PVC shutters. complete all as specified and directed by Engr-in-charge.

S&F Anodised Aluminium handles 150 mm size D type with plate complete all as specified and directed by Engr-in-charge.

M&L for Fabrication of powder coated aluminium frame work as in frames for aluminium windows with or without rebate or for sliding windows(two track/three track ) , ventilators etc with louvers having suitable mechanism for tilting , U shaped fillets for securing Jallies etc & the likes complete all as per sample kept in GE Office & fixed in position complete all as specified and directed by Engr-in-charge. Note : Glass panes in louvers & stainless steel wire cloth shall be measured & paid for seperately,

M&L for Pre powder coated aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators. complete all as specified and directed by Engr-in-charge.

M&L for Pre powder coated aluminium window shutters prepared for sliding or hanging etc including handles, tower bolt and hinges complete using section weighing 0.55 kg/RM including necessary joinng cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed by Engr-in-charge.

M&L for 4.80 mm thick plain Sheet glass/ tinted or coloured film as required, ordinary quality and glazing withsecured in wooden beads or snap fit glazinng clips square exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-charge.

M&L for Stainless steel wire cloth 0.36 mm nominal dia of wire & avg width of appertuer 1.40 mm fixed to Anodised aliminium framework of windows / vents & door shutters etc complete all as specified and directed by Engr-in-charge.

M&L for Preparation of old painted previously treated wooded surfaces & applying 01 coat of syn enamel paint. complete all as specified and directed by Engr-in-charge.

M&L for Preparation of new wooded surfaces & applying 02 coat of syn enamel paint over one coat of pink primer. complete all as specified and directed by Engr-in-charge.

Taking out from position framed woodwork as in cupboards/cabinets etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & removal of the rubbish outside MD land all as directed at site for overall sizes exc 0.50 sqm but nexc 1.50 sqm & depthd nexc 60 cm complete all as specified and directed by Engr-in-charge.

S&F 12mm thick Plywood water proof, termite proof, grade BWP, type BB fixed with screws to timber frame work complete all as specified and directed by Engr-in-charge.

S&F 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction complete all as specified and directed by Engr-in-charge.

M& L PVC cupboard of approved quality of size 1.00 x 2.00 x 0.60 m including PVC shelves fittings, locking arrangment, hanging arrangment all as per sample and all as specified and direction of Engineer-in-Charge.

M&Lfor 75 mm thick PCC (1:4:8) type D-2 using 40 mm stone aggregate as in Sub Base complete all as specified and directed by Engr-in-charge.

M & L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete application will be applied through authorised applicator complete all as specified and directed by Engr-in-charge.

M & L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. application will be applied through authorised applicator complete all as specified and directed by Engr-in-charge.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engr-in-charge.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engr-in-charge.

M&L for complete removal of existing treatment from walls/ceiling and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over and including a coat of 2 mm thick wall care putty on new/old surface complete all as specified and directed by Engr-in-charge.

Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc complete all as specified and directed by Engr-in-charge.

Taking down carefully sub-main wiring of any description and making good to ther disturbed surfaces to match the existing EIC complete all as specified and directed by Engr-in-charge.

M&L for Point wiring (Concealed) using approved colour coding as per IS Red Black and green for single phase circuits) with multi stranded copper conductor 1.5 Sqmm nominal cross area single core PVC insulated and unsheathed FR LSH cable 1100 Volts grade ISI 694 marked with valid CML No. in and including medium grade PVC concealed conduit of dia not less than 20mm and conduit accessories ISI marked with valid CML No. ( IS 9537 -1983 for wall/roof /floor etc with pressed flush metal boxes covered with inner plates & outer plates,modulaor cover plates,blank plates etc suitable for mounting of Modular switches & sockets including PVC insulated multi stranded copper conductor FRLS 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continully conductor to commonearth and connecting to earrth dolly complete all as specified and directed by Engr-in-charge. for the follwing

(a) One light point controlled by one, one way switch

(b) One fan /Exhaust fan, point controlled by one way switch.

(c) One socket outlet 3 pin 6 Amps on same board

(d) One socket outlet 3 pin 6 Amp on independent board

(e) One bell point controlled by one bell push.

All as per item No 88 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board. complete all as specified and directed by Engr-in-charge.

S&F Modular switch flush type single pole one way 5 Amp ISI Marked. complete all as specified and directed by Engr-in-charge.

S&F Modular switch flush type single pole one way 15 Amp ISI Marked.. complete all as specified and directed by Engr-in-charge.

supply & Fix only Modular bell push, flush type, 5 Amp ISI Marked complete all as specified and directed by Engr-in-charge.

Supply and fix bell, AC 230 volts, single pole Multi tune type . complete all as specified and directed by Engr-in-charge.

S&F Modular socket outlet 2 in 1, 5 pin, 5 Amp flush type complete all as specified and directed by Engr-in-charge.

S&F Modular socket outlet 2 in 1, 6 pin, 5 and 15 amp flush type ISI Marked. complete all as specified and directed by Engr-in-charge.

M & L for Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body. complete all as specified and directed by Engr-in-charge.

Taking down and refixing / Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan. Note- Old UNSV ceiling fan to be deposited at E/M store complete all as specified and directed by Engr-in-charge.

Taking down and re-fixing only exhaust fan (M.D.supply) and connecting up including provision of cable from ceiling rose/connector to fan. Old UNSV exhaust fan to be deposited at E/M store complete all as specified and directed by Engr-in-charge.

Supply and fix ceiling fans, complete with three blade, down rod, Electronic regulator and accessories 230V, 1200mm sweep min air delivery 210 CFM, WITH SERVICE VALUE 6.00 BEE five star rated with brushless direct current motor (BLDC) Motor and Complete all as specified and directed by Engr-in-charge.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with Louvers Shutter, voltage 230V, 50Hz,RPM 1200, copper winding of sweep 300M complete all as specified and directed by Engr-in-charge.

S&F sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 6 MCB SP as out going SPN 8 way complete all as specified and directed by Engr-in-charge.

Supply & fix Single Pole & neutral "c" series 40 Amps ISI marked complete all as specified and directed by Engr-in-charge.

S&F sheet metal enclosures 415 volt TPN 8 way (prewired)with 200 Amp rated bus bar, double door IP-43 DB's suitable for one No 100 Amp 10 KA TPN as incoming complete all as specified and directed by Engr-in-charge.

Supply and Fix MCB Single pole"C" series 5-32 Amps ISI marked. complete all as specified and directed by Engr-in-charge.

Supply and Fix MCB Single pole & neutral "C" series 63. Amps ISI marked. complete all as specified and directed by Engr-in-charge.

Supply and fixing MCB TPN C Curve 100 Amps complete all as specified and directed by Engr-in-charge.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charge.

S&F Decorative wall light comprising Ploycarbonate lampshade and metal fitting holder, cord grip pattern and holder made up of high grade engineering material suitable for 9 W LED lamp. complete all as specified and directed by Engr-in-charge.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed by Engr-in-charge.

Supply and fix in replacement 2-Watt LED Wall Light (bed light) for reading incl taking down old UNSV light complete all as specified and directed by Engr-in-charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charge.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified and directed by Engr-in-charge.

Supplying fixing sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 6 Sqmm and one run of 6 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc. complete all as specified and directed by Engr-in-charge. NOTE: Two runs of cable with one run of earth wire and PVC conduit shall be measured & paid for as one length.

M&L for Earthing complete with galvanised steel earth plate electrode 60 x x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion . Note : Rates are deemed to be included for necessary earth work , earth pit with RCC cover of size 300X300 x25 mm etc complete all as specified and directed by Engr-in-charge.

Taking down Geyser including taking out connection and depositing to E/M store and refixing them and checking the geyser after Re-installation complete all as specified and directed by Engr-in-charge.

Supply, laying testing in trenches LT UG XLPE insulated,armoured, heavy duty electric cable, aluminium coductor, 1100 V grade,croos sectional area 50 Sqmm 3.5 core complete all as specified and directed by Engr-in-charge. Note : Earth work and brick work measured and paid separately

Excvation in trenches not more than 1.5 meter wide and in depth in soft/loose soil complete all as specified and directed by Engr-in-charge.

Retuerning and filling of excvated loose soil in treches complete all as specified and directed by Engr-in-charge.

Removal of surplus loose soil from excavated place and deposting at safe side distance not more than 50 meter from excavated place complete all as specified and directed by Engr-in-charge.

Supplying and laying un-reinforced precast concrete cable cover, class LV, Type I, flat, size 300 mm x 180mm x 40mm complete laid over the cable perpendicular to the cable for protection, complete all as specified and directed by Engr-in-charge.

Supply and lay sand for sand cushioning for cable protection in trenches all as directed and specified in SSR Part - 1.Note:. for the purpose of payment punned thickness will be measured. complete all as specified and directed by Engr-in-charge.

Supply and fix in replacement of GI tubing of size 40mm bore, light grade for protection of cables on poles / under road crossing complete all as specified and directed by Engr-in-charge.

M/s SAAR ENGINEERS (BID ID -3421736)

Om Trading Corporation (BID ID -3427426)