Supply, Installation, Testing and Commissioning of LAN at Central Jail and Correctional Home, Poojappura, Thiruvananthapuram.

Amount

Supply and Installation of Layer 2 manageable 28 port Ethernet Switch with 24 x 10/100/1000 Mbps+ 4 x Gigabit SFP (2 combo) ports, web manageable supporting ipv6 having 512 MB RAM, 256 MB flash memory, AC 120/230V. Preferred Make: Allied Telesis, Brocade, Cisco, Netgear or equivalent

Supply and Installation of 10 Port Ethernet managed Switch with 8 x 10/100/1000Mbps + 2 x combo Gigabit SFP ports having 512 MB RAM, 256 MB flash memory, Layer 2 switching, DHCP support, VLAN support, Ipv6 support etc. AC 120/230V. Preferred Make: Allied Telesis, Brocade, Cisco, Netgear or equivalent

Supply and Installation of 1G Single Mode Fiber Module Approved Model: Cisco or the make similar to above switch

Supply and Installation of WiFi router with five numbers of 10/100/100 Mbps ports (1 WAN port+ 4 LAN ports) Dual band with 300+1300 Mbps high speed wifi and anteena, 128 MB flash, USB 2.0 port, AC 230V input etc. Preferred make: Cisco, D-Link, Netgear or equivalent.

Supply and fixing 24 port Enhanced CAT-6 fully loaded Modular type patch panel as per EIA/TIA-TSB 40A specification for interconnecting servers and clients, including termination charges. Preferred Make: Actassi, Belden, Panduit, R&M.

Supply and fixing 24 port Enhanced CAT-6 10 port fully loaded Modular type patch panel as per EIA/TIA-TSB 40A specification for interconnecting servers and clients, including termination charges. Preferred Make: Actassi, Belden, Panduit, R&M or equivalent

Supply and fixing CAT-6 Information outlet for 1000 Mbps with spring shutter face plate+SMB+I/O including termination. Preferred Make: Actassi, Belden, Panduit, R&M or equivalent

Supply and Installation of CAT-6 information outlet for 1000Mbps having spring shutter / dust cover dual face plate with SMB, two numbers of RJ45 keystone sockets, including termination charges etc. Preferred Make: Actassi, Belden, Panduit, R&M or equivalent

Supply, laying, certification and documentation of CAT-6 UTP cable through the existing conduit and cassing and capping as required. Preferred Make: Actassi, Belden, Panduit, R&M or equivalent

Supply, laying, certification and documentation of weather proof steel graded outdoor Cat-6 UTP 23AWG Armored Cable through the existing conduit and cassing and capping as required. Preferred Make: Actassi, Belden, Panduit, R&M or equivalent

Supply and providing 3Mtr CAT-6 Giga UTP patch cord. Preferred Make: Actassi, Belden, Panduit, R&M or equivalent

Supply & providing 1Mtr CAT-6 Giga UTP patch cord. Preferred Make: Actassi, Belden, Panduit, R&M or equivalent

Supply and fixing 19'', 6U Network Rack with ACDB 6 port, cable manager, PDU etc. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent.

Supply and fixing of 4U wall mounting steel rack with cable manager, PDU etc. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent.

Supply and Installation of One metre Single Mode Fiber pigtail. Preferred makes: - Commscope, Molex, R&M, Sterlite or equivalent

Supply and Installation of SC LC style Single Mode 9/125 micron Duplex Patch cord. Preferred make: Commscope, Molex or equivalent..

Supply and Installation of 6 Core Single Mode Armored Low Water Peak Outside plant (OSP) OFC having LSZH sheath, conforming to ITU-T G.655, IEC 60794-1 : 2001, IS 13882 (Part 1/Sec 1) : 1999 etc. Preferred makes: - Commscope, Molex, R&M, Sterlite.

Supply and Installation of 19" rack mountable 1U size complete Steel housing fully powder coated Light Interface Unit (LIU) with 6 SC connectors having FR grade Nylon Cable grommets, ABS Splice Trays with fully cushioned splice holder containing grooves for fixing splice protection sleeves, Cable Spools made up of flame retardant plastic, high impact resistance, stackable design for providing sufficient room for storage of excess cables, Blanking plates, etc. Including splicing charges. Preferred makes: - Amp, Molex, R&M, Sterlite or equivalent

Supply and fixing of 25 mm medium gauge PVC ivory conduit / oval conduit / capping-n-casing with special confirming to ISI standard on surface using suitable size fixtures spacing not exceeding 50 cm including making good the damage colour washing etc as required Preferred Make: TOBS/BALCO/Espee or equivalent

Supply and fixing of 25 mm medium gauge PVC ivory conduit with special confirming to ISI standard in recess using suitable size fixtures spacing not exceeding 50 cm including making good the damage colour washing etc as required Preferred Make: TOBS/BALCO/Espee or equivalent

Supply and fixing of 20 mm medium gauge PVC ivory conduit/oval conduit/ capping-n-casing with special confirming to ISI standard on surface using suitable size fixtures spacing not exceeding 50 cm including making good the damage colour washing etc as required Preferred Make: TOMS/BALCO/Espee or equivalent

Supply and fixing of 20 mm medium gauge PVC ivory conduit with special confirming to ISI standard in recess using suitable size fixtures spacing not exceeding 50 cm including making good the damage colour washing etc as required Preferred Make: TOMS/BALCO/Espee or equivalent

Supply and fixing ≥50mm x ≥50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Accessories including External Angle 90°, Flat Angle 90°/TEE, Internal Angle 90°, Internal Coupler, Flat cross, End Cap, Flanged Coupler, Joint cover, Cable Retainer, Wall plate for internal angle etc. Preferred makes: - OBO, MK, Precision or equivalent.

Supply and draw Industrial standard Taut/Stay wire having 3 years OEM warranty. Model- Galva steel wire rop or equivalent.

Supply and Installation of 4'' dia 3 mm thick 6 mtr height Tubular (GI) Pole along with all accessories, concrete pole foundations with stability mat and fixing of pole clamp having 3 years OEM warranty.

Supplying, threading, laying and jointing of 'B' class 40 mm dia GI pipe with all required accessories in ground in the existing trench as protective covering to network cables.

Excavation of trench of size 30x100 cm, sand cushioning up to a height of 25 cm (80+170 mm) with river sand/Quary dust, providing protective covering with country burned bricks laid breadth wise, refilling the trench etc as required for laying GI Pipe

Supplying and Installation of ≥25mm HDPE pipe for mechanical protection to optical fiber cable conforming to IS 14930 part II along with all required accessories

GALAXY INFOSOLUTIONS