NIT No. 20, Item No.04 (2025-26

630A, TP, 50kA, MCCB with Thermal Magnetic Release,(DN3 -630N)

Extended Rotary Handle for 630A TP MCCB (DN3)

Spreader Link for 630 Amps. TP MCCB (DN3)

400A,TP, 36kA, MCCB with Thermal Magnetic Release (DN3B -400D)

Extended Rotary Handle for 400 A TP MCCB (DN3)

Spreader Link for 400 Amps. TP MCCB (DN3)

100 A, TP, 36 kA, MCCB with Thermal Magnetic Release (DN2- 250D) Range (100-125A)

Extended Rotary Handle for 100A TP MCCB (DN2)

Spreader Link for 100A TP MCCB (DN2)

63A, TP, 36 kA, MCCB with Thermal Magnetic Release (DN0- 100D)

Extended Rotary Handle for 63A TP MCCB (DN0)

Spreader Link for 63A TP MCCB (DN0)

Power contactor Type-MNX 18

Add-on Auxiliary contact block Type-MNX-A1(2NO+2NC) front mounted

Thermal overload relay, Type-MN 2,relay range(As per existing)

Control Relay Type-MX0 22E, AC,(2NO+2NC)

Single phase preventor, type-SM301(3Ph,3W),Cat no. MA51BC

63 A, FP, C curve, MCB

63 A, TP, C curve, MCB

32 A, DP, C curve, MCB

32 A, FP, C curve, MCB

MCB SP, 6A, C-curve

Digital 3 phase Ammeter

Digital 3 phase Voltmeter

Indicating light LED type RYB & for ON/OFF

Push Button with contact block complete (Green/Red/yellow)

LED Tube light of Higher Wattage Decorative ultra slim aluminium LED lighting fixture with high lumen output, environment friendly, energy efficient ready to use pack. Make-Havells/Phillips/DJB approved.

Energy saving, environment friendly, long life, high pressure die cast aluminium housing with LEDs as light source, flood light suitable for high mast, area lighting. Make-Havells/Phillips/DJB approved.

1.5sq mm ISI marked, FRLS PVC insulated, single core copper conductor cable. make-Havells/DJB Approved.

2.5sq mm ISI marked, FRLS PVC insulated, single core copper conductor cable.make-Havells/DJB Approved.

LT power cable size 10sq mm XLPE armoured, 4 core, 650/1100 V grade as per IS 7098(part 1) 1988 with upto date amendments aluminium conductor cable. Make-Havells/DJB approved.

New generation energy saving and environment friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07.70/72W LED. Make-Havells/Phillips/DJB approved.

Replacement of Digital VAF+PF energy meter by CI 0.5, LED display, RS-485, VAF+PF meter or equivalent in the existing panel with all supporting accessories and spares required for meter operation, all complete in all respect and their commissioning.

Other material required like copper wires, insulators, heat shrinkable sleeve, Bakelite, nuts & bolts, aluminium thimbles, ferrules, rubber packing, gate lock, name plates, safety marks, cable glands, current transformers, push buttons, PVC tapes, phase barrier etc. and MS foundation repairing as required at site apart from above.

Scrubbing of old paint of the panel with sand paper after switch off bus coupler. One by one each box of panel to give smooth finish. painting of panel with spray and brush to give panel smooth like new finish. Make of paint:-Asian/berger/nerolac.

Labour charges for dismantling of old damaged material and installation of new items into the panel and testing commissioning.

Please Enable Macros to View BoQ information