Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹24.3 L
EMD Value
₹48,600
Closing Date
4 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE FORT KOCHI
GARRISON ENGINEER MILITARY ENGINEER SERVICES GE FORT KOCHI -682001
ADDITION/ ALTERATION AND SPECIAL REPAIRS TO BUILDING NO P-114 AT INS DRONACHARYA UNDER GE FORT KOCHI
2026_MES_798486_1
8424/E8_GE_FORT_KOCHI
Open Tender
Civil Works
Item Rate
270 days
FORT KOCHI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE FORT KOCHI
₹48,600
Yes
13 Nov 2026
13 Nov 2026
11 Dec 2026
13 Nov 2026
4 Dec 2026
27 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down old existing water proofing APP membrane only of any thickness from the roof surface, parapets, Roof projection facia, and walls and removing out of MoD land complete all as specified and as directed. | 70 | Sqm | - | - |
| 2 | Demolition of cement concrete including cement screed roof tiles of any description and in any position not otherwise specifically provided for and removing out of MoD land complete all as specified and directed. | 3.24 | Cum | - | - |
| 3 | Cutting V-groove/U-groove of size 5 mm wide × 10/15 mm deep along the cracks on the top surface of the terrace mother slab wherever cracks observed, thoroughly cleaning the groove with an air blower or wire brush to remove dust and loose particles, providing and applying approved two-part, solvent-free, low-viscosity properly mixed epoxy resin into the groove complete all as specified and as directed.
Make:- SIKA (Sikadur-52 / Sikadur-55 LP)/ Asian Paints (SmartCare APCOREP Epoxy Inject Grout)/ Dr. Fixit Epoxy Injection Grout (EIG)/ Fosroc (Nitofill EPLV)/ Bostik LVEP | 10 | RM | - | - |
| 4 | Material and labour for carefully chipping the edges of existing RCC slab cutouts to expose the aggregate and provide a mechanical key including removal of loose concrete, dust, and cleaning with compressed air. Drilling holes into the existing RCC slab for rebar dowels using a rotary hammer drill, depth shall be minimum 100mm, inserting reinforcement bars and ensuring zero air voids in the epoxy. Application of an Epoxy-based Bonding Agent (old-to-new concrete bridge) to the chipped vertical faces of the existing slab just prior to casting. Supplying and pouring Micro-Concrete or Non-Shrink Concrete to fill the cutout including shuttering/formwork from the underside and finishing top surface complete all as specified and as directed. | 1.85 | Cum | - | - |
| 5 | Supplying, cutting, bending, and placing TMT reinforcement bars (Fe500/Fe550) and tying with GI binding wire including injecting high-strength Pure Epoxy Resin (e.g., Hilti HIT-RE 500 V3 or Fosroc Reebafill) into cleaned holes and Inserting reinforcement bars and ensuring zero air voids in the epoxy complete all as specified and as directed. | 50 | KG | - | - |
| 6 | Material and labour for preparation for chemical waterproofing treatment as per following specification complete all as specified and as directed by Engr-in-Charge :
(i) Grinding the RCC roof slab surface with mechanical grinder to make the surface even and remove all the undulations, followed by cleaning, washing, removing all dirt/ dust using electrical blower complete all as specified and as directed.
(ii) Applying cement slurry coat admixed with SBR Latex as per manufacturer’s instructions over the cleaned surface and providing and laying 45 GSM fibre mesh embedded in cement slurry.
(iii) Finishing the depressions using polymerised mortar admixed with SBR Latex. | 70 | Sqm | - | - |
| 7 | Material and labour for providing and fixing 150 gsm non-woven Polypropylene geo textile membrane with overlap of minimum 50mm as protective medium before screed concrete works over waterproofing treatment complete all as specified and as directed. | 65 | Sqm | - | - |
| 8 | Material and labour for M20 grade Ready mix concrete layer as in screed concrete course laid in panels over roof treatment including necessary formwork and filler boards to maintain proper slope, finished even and smooth without using extra cement complete all as specified and as directed. | 3.24 | Cum | - | - |
| 9 | Material and labour for application of Waterproofing Treatment using Liquid-Applied Pitch-Free Polyurethane Membrane as per following specification complete all as specified and as directed :-
(i) Applying one coat of two-component water-dispersible epoxy primer, mixed strictly as per manufacturer's instructions and diluted with double quantity of clean water (1:2 by volume), applied uniformly using a roller at a coverage rate of 8.0 to 10.0 Sqm (diluted mix). The applied primer shall reach tack-free condition before water proofing coating is applied.
(ii) Application of Two coats of Single-component, liquid-applied, pitch-free polyurethane (PU) elastomeric waterproofing membrane (Pitch-Free) of DFT 1.30 mm with a coverage of 2 kg/Sqm, with roller that cures by reaction with atmospheric moisture to form a tough but flexible waterproofing membrane, The second coat should be applied in perpendicular direction to the First coat. Termination to be done on wall extending the coating to min.150mm height above the finished floor level.
Notes:
(i) Flood Test Prior to placement of screed protection, flood to a minimum depth of 50mm of water for 24 hours. Drains shall be plugged and barriers placed to contain the water.
(ii) Item Nos. 3 to 9 shall be executed strictly through approved specialist applicators. The contractor shall submit the manufacturer’s applicator certificate, material purchase invoices, and a legal guarantee certificate prior to payment.
Make: Fosroc Nitoproof 600 PF/ Asian Paints (SmartCare PU Magnum)/ Sika (Sikalastic®-591)/ Dr. Fixit (Flexi PU 270(I))/ Bostik (Dampfix PU) | 70 | Sqm | - | - |
| 10 | Material and labour for chipping and removing all damaged and de-bonded/spalled concrete and plaster from the roof projections, facia, ceilings, chajja, columns etc manually or mechanically so as to expose the corroded reinforcement bars, complete all as specified and as directed. | 10 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.26 MB
8424Tenderdocu.pdf
Tender Documents • 1.01 MB
BOQ_895754.xls
BOQ • 0.45 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .