Electrical work of Toilet blocks (renovation) at various building at IPR, Bhat, Gandhinagar

Amount

Point wiring: The scope for each item of Point Wiring, includes Supply, Installation, Testing and Commissioning, including supplying all materials like Switches, Sockets, MS/PVC Box, Wires, Conduits & accessories, junction boxes, Hardwares, saddles & clamps, connectors, neutral links, ferrules, Cu lugs, Insulating Tapes, Identification Labels etc and all works like laying / jointing / clamping of conduits, drawing of wires, installation of switch-boards, etc complete and testing & commissioning complete as per Instruction & Direction of Engineer-in-Charge or his authorized representative/s. Further, the scope for unit rate of each item of Point Wiring also includes, Supply & Laying of 25mm wide (inner), MMS, Electrical grade, ISI marked PVC Conduits/casing caping in Wall/floor with accessories, hardware, etc. complete. The conduit/casing capping shall be run on wall/ceiling/column/beams as per site conditions maintaining line and level as well as good workmanship and as instructed & directed by Engineer-in-Charge or his authorized representative/s. Supply & Wiring with 1100 volt grade ISI marked PVC - FRLS insulated (IS 694 with latest amendments) wires having flexible (multi strands) copper conductors.

(b) For Light and 6A Switch-Socket Points : From Switch Board to Outlet Point : 1.5 Sq.mm flexible Cu wires for Phase / Off, Neutral, and Earth, 3 nos. separate wires for each point. (C) For 6/16A Socket Points : From Distribution Board to Outlet Point : 2.5 Sq.mm flexible Cu wires for Phase / Off, Neutral, and 1.5 Sq.mm. Flexible Cu. Wires for Earth, 3 nos. separate wires for each point. (D) For 16A Socket Points (for AC and special purpose): From Distribution Board to Outlet Point : 2.5 Sq.mm flexible Cu wires for Phase / Off, Neutral, and 2.5 Sq.mm. Flexible Cu. Wires for Earth, 3 nos. separate wires for each point. From Distribution Board to Outlet Point : 2.5 Sq.mm flexible Cu wires for Phase / Off, Neutral, and 2.5 Sq.mm. Flexible Cu. Wires for Earth, 3 nos. separate wires for each point. Rates of power points wiring items is inclusive of necessary power circuit from the DB to the power socket.

Primary Point: Point Wiring for Primary Point complete as per Item No. 1.00 above with 6A modular switch for control in existing conduits and as directed by Engineer in Charge or his representative.

Secondary point wiring: Point Wiring for Secondary Point, looped from the adjacent primary points complete as per Item No. 1.0 above, but without switch in existing conduits and as directed by Engineer in Charge or his representative.

Exhaust Fan point : Point wiring complete as per item no.1.0 but for exhaust fan with 6A modular switch and socket complete in all respect and as directed by Engineer-in -Charge.

6A plug point on switch board: Point Wiring complete as per item No. 1.00 above, but for 6A one-way Modular type Switch and 6A Socket, installed in and wired from the Lighting Switch Board.

Light fixtures Accessories and Fans

Supply, assemble, installation, connection, testing and commissioning of 20W four feet LED batten, 6500K, minimum 2000 lumens output, surface mounted, connection with flexible copper conductor wire, Earthing Connection to each fittings & fixtures, necessary hardware etc. as directed by Engineer-in-Charge or his representative.

Supply, assemble, installation, connection, testing and commissioning of 15W LED down light fixture, 6500K, minimum 1500 lumens output, surface mounted, connection with flexible copper conductor wire, Earthing Connection to each fittings & fixtures, necessary hardware etc. as directed by Engineer-in-Charge or his representative.

Supply, assemble, installation, connection, testing and commissioning of 15W LED down light fixture, 6500K, minimum 1500 lumens output, Recess mounted, connection with flexible copper conductor wire, Earthing Connection to each fittings & fixtures, necessary hardware etc. as directed by Engineer-in-Charge or his representative.

Supply, Installation, Testing and commissioning of 300mm sweep, 900 rpm, Heavy duty, totally enclosed motor type exhaust fan suitable for operation on 230V, 50 Hz single phase AC supply complete with 3 core copper conductor cable, bird net with rubber mountings and confirming to IS- 2312 (with latest amendment) including required fixing accessories, hardwares, etc. as directed by Engineer-in-Charge or his representative.

Aatashi Energy Solution

Gaurav Electricals