ADDITION ALTERATION OF TRAINING SHED CGTC AT CGDHQ 4 AT FORT KOCHI

Amount

B/R PORTION

Material and labour for brushing neat cement slurry with 3.0kg of cement per sq. metre after roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

Material and Labour for Vitrified ceramic tiles 10mm thick (square/rectangular) light coloured area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 complete complete all as specified and as directed.

Material and Labour for Vitrified ceramic tiles 10mm thick (square/rectangular) light coloured area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm in vertical surfaces such as skirting, dados, riser to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 complete complete all as specified and as directed.

upply and fix IInd class hard wood plain fillets square or rectangular or triangular, clean swan of sectional area exc. 13 sqcm and not exc. 25 Sqcm fixed with screws or brads complete all as specified and as directed.

Supply and fix IInd class hard wood plain fillets, clean swan, bullnosed, splayed, chamferred or rounded of sectional area not exc. 3 Sqcm fixed with screws or brads complete all as specified and as directed.

Material and Labour for french polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

Material and Labour for pre-laminated particle board 12 mm thick, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws in timber frame work complete all as specified and directed.

Material and labour for preparation of old treated wall surfaces by washing, rubbing, brooming down or steel wire brushing or scraping down smoke soot, moulds, mass and efflorescent salts, and applying one coat of acrylic distemper on walls all as specified and as directed.

Materials for fabrication and fixing of 316 grade stainless steel pipe Tubular Hand Railing using butt welded tubes including special shaped washers etc., complete all as specified and directed.

E/M PORTION

Supply and install hi-wall split type AC unit indoor/ outdoor complete with cordless remort control unit and with in built air ioniser and plasma filter for better indoor air quality with with inverter AC single phase with all accessories of capacity 2 TR, 5 star rating as per BEE norms and fixed with necessary copper pipe and MS bracket duly painted with two coats of synthetic enamel paint over a coat of primer for fixing external compressor unit all as specified and as directed. Make: LG/Godrej/Blue star/Voltas/Daiken.

Supply and fix voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed input supply between 170 to 250V with output stabilizer supply at 230 V with accuracy ± 2.5% of capacity 15 Ampere all as specified and as directed. Make: VG 500 of V Guard or Equalent in Blue star/Voltas

Material and labour for sub main wiring with two runs of FRLS single core multistranded copper conductor 6 sqmm, PVC insulated and unsheathed drawn through and including suitable size PVC medium grade conduit with all accessories and junction boxes etc fixed to walls/ceiling including one run of 4 Sqmm copper (insulated) cable as earth continuity conductor including complete all as specified and as directed. Note : 2 runs of 6 Sqmm cable alongwith one run of 4 Sqmm cable and PVC Conduit shall be measured one unit length.

Supply and fixing Single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps all as specified and directed.

Supply and fix MCB SPN 20 amps with 10 KA 240 Volts 50 Hz AC all as specified and as directed.

Supply and fix MCB single pole & neutral 240 volt C curve 10 KA 32 Amps capacity IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area complete including suitable size copper Lugs complete all as specified and directed complete all as specified and directed.

Supply and Fix Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, SPN 4 way with 200 Amps rated copper bus bar double door protection, neutral bar,earth bar, single pole and neutral 240 volts, MCBs used as incommer Double door, flush to wall complete all as specified and as directed. NOTE: MCB shall be measured and paid separately.

REIGN CONSTRUCTIONS

MS BUILDERS

HIRA FACILITY

M-TECH ENGINEERS